Slow mobile performance with Questions Quiz

Similar Questions

• HP BL460c slow performance with Mez Qlogic FC.

  I am under 16 blades ESXi with Qlogic FC mezzanine cards.  Performance have been greate to the Build number:

  153840 on March 20, 2009.   After the upgrade to the Build number: 153875, qlogic module took more than 30 minutes to load and later all the modules load very, very slowly.  I tried every generation since March 20, and they all lead to very slow startup time and slow CF performance with lots of timeouts.

  Today, took me to update to the latest version of the HP BIOS for server, network cards, Qlogic and the ILO.  And I had no luck.  Does anyone have any suggestions?

  Thank you

  you use virtual connect and if so what version do you use?

• Slow performance with a S130

  Hi, just to take delivery of a PowerEdge R630 that has a Perc S130 RAID card with SATA 4 disks * 250 GB 7200 RPM in a RAID5 array and we meet a few slow unexpected performance.

  The use of CrystalMark, the maximum speed of reading that we see is 12 MB/s, with 7 MB/s write. I know this is software raid, but I expected a bit more performance than those.

  The most recent drivers have been taken from the dell web site (4.0.0.37) and looking back, windows, installing the server took much longer than usual.

  I know it is soft raid, rather than hardware raid accelerated, but the performance to be much better as it is, I would have expected (I have here, a NAS with raid software providing 90 MB/s read/write with just an Atom processor, not 2 * Xeon E5-2620 v3.)

  Thank you very much.

  "No, the S series controllers are garbage. My recommendation is that if you care enough about its performance to ever consider a running reference point, then do not use it. »

  Accept this controller is useless, Dell should stop using these low-end devices (I do not call it a raid of the notice).

  Now, all users, you can spend a lot of time trying to understand the question, wait for a possible solution (long and unlikely, as it was broken to begin with) or you can buy a real hardware raid. Personally, I inherited a few customers with the low-end devices and do not waste time, I just bought real hardware raid controllers.  Be arrogant / angry at Dell does not receive your subsystems raid to the height, Hey if you order a Porsche with a VW Beatle engine do not expect to win races.

• Extremely slow performance with Radeon HD 7870

  Hello

  I use a number of Adobe programs on my new 64 bit system of Windows 8, with 16 GB of ram, a processor Intel Core 2.67 ghz i5 and AMD Radeon HD 7870 2 gig. All programs (including After Effects and Illustrator) work very well with the exception of Photoshop CS6 64 bits, which is extremely slow performance with GPU to use enabled in my preferences (Photoshop selects by default). If I disable the graphic processor use, this slowdown faints. If I change the Basic Design Mode, there might be a slightly detectable improvement during Normal and advanced, but it is still horribly slow. The refresh rate seems to be only a few frames per second. Everything is slow: brushes, zoom, panoramic, as well.

  I tried changing the settings I've seen suggested elsewhere: I went 2 level of Cache, history says 10 and the size of the tile to 128 k. No effect. Photoshop is currently the default using 60 percent of available ram. Efficiency has remained 100% overall of all my tests. In addition, this slow performance touched me from the moment that I installed Photoshop; It didn't arise after previous good performance. The problem exists regardless of the size or the number of documents that I opened. Performance is always terrible, even when I create a new blank canvas of 500 x 500 pixels and try a simple task like drawing with a brush.

  Photoshop is perfectly up to date, and so are my graphic drivers (Catalyst version 13.1). Any help would be greatly appreciated; yet performance is so bad in Photoshop it is unusable, graphic acceleration activated. Thanks in advance for the answer.

  Information on the system of Photoshop:

  Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00) x 64

  Operating system: Windows 8 64-bit

  Version: 6.2

  System architecture: Intel CPU Family: 6, model: 14, Stepping: 5 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2 FP

  Physical processor count: 4

  Processor speed: 2665 MHz

  Built-in memory: 16379 MB

  Free memory: 13443 MB

  Memory available to Photoshop: 14697 MB

  Memory used by Photoshop: 60%

  Tile image size: 128K

  Image cache level: 2

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  OpenCL Version: 1.2 AMD - APP (1084.4)

  OpenGL, Version: 3.0

  Texture size video Rect: 16384

  OpenGL memory: 2048 MB

  The video card vendor: ATI Technologies Inc.

  Renderer video card: AMD Radeon HD 7800 Series

  Display: 1

  Limits of the display: top = 0, left = 0, low = 1080, right = 1920

  Video card number: 2

  Graphics card: AMD Radeon HD 7800 Series

  Driver version:

  Driver date:

  Video card driver: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

  Video mode: 1920 x 1080 x 4294967296 colors

  Legend of the video card: AMD Radeon HD 7800 Series

  Memory: 2048 MB

  Video card: 1

  Video card: driver Microsoft Basic Render

  Driver version: 9.12.0.0

  Driver date: 20121219000000.000000 - 000

  Video card driver:

  Video mode:

  Legend of the video card: rendering driver Microsoft Basic

  Video card memory: 0 MB

  Serial number: 90970078453021833509

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

  Temporary file path: C:\Users\RAFFAE~1\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  C:\, 931.5 G, 534,8 free G

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Installed components:

  ACE.dll ACE 2012/06/05-15: 16: 32 66,507768 66.507768

  adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012

  AdobeLinguistic.dll Adobe linguistic Library 6.0.0

  AdobeOwl.dll Adobe Owl 2012/09/10-12: 31: 21 5.0.4 79.517869

  AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471

  Adobe AdobePIP.dll 7.0.0.1686 product improvement program

  AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661

  adobe_caps.dll Adobe CAPS 6,0,29,0

  AGM.dll AGA 2012/06/05-15: 16: 32 66,507768 66.507768

  ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56

  aif_core.dll AIF 3.0 62.490293

  aif_ocl.dll AIF 3.0 62.490293

  aif_ogl.dll AIF 3.0 62.490293

  Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000

  ARE.dll ARE 2012/06/05-15: 16:32 66,507768 66.507768

  Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830

  AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830

  Bib.dll BIB 2012/06/05-15: 16: 32 66,507768 66.507768

  BIBUtils.dll BIBUtils 2012/06/05-15: 16: 32 66,507768 66.507768

  boost_date_time.dll product DVA 6.0.0

  boost_signals.dll product DVA 6.0.0

  boost_system.dll product DVA 6.0.0

  boost_threads.dll product DVA 6.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.1.0.20577 2.1.0.20577

  CoolType.dll CoolType 2012/06/05-15: 16: 32 66,507768 66.507768

  data_flow.dll AIF 3.0 62.490293

  dvaaudiodevice.dll product DVA 6.0.0

  dvacore.dll product DVA 6.0.0

  dvamarshal.dll product DVA 6.0.0

  dvamediatypes.dll product DVA 6.0.0

  dvaplayer.dll product DVA 6.0.0

  dvatransport.dll product DVA 6.0.0

  dvaunittesting.dll product DVA 6.0.0

  Dynamiclink.dll product DVA 6.0.0

  ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082

  FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433

  filter_graph.dll AIF 3.0 62.490293

  hydra_filters.dll AIF 3.0 62.490293

  icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  image_compiler.dll AIF 3.0 62.490293

  image_flow.dll AIF 3.0 62.490293

  image_runtime.dll AIF 3.0 62.490293

  JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  LogSession.dll LogSession 2.1.2.1681

  mediacoreif.dll product DVA 6.0.0

  MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174

  msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CS6 CS6 Photoshop.dll

  Adobe Photoshop CS6 CS6 plugin.dll

  PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383

  Adobe Photoshop CS6 CS6 PSArt.dll

  Adobe Photoshop CS6 CS6 PSViews.dll

  SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082

  ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082

  svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24

  WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112

  Required plugins:

  3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Accented edges 13.0

  Adaptive wide-angle 13.0

  Angular Strokes 13.0

  13.1.2 on average (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Bas-relief 13.0

  BMP 13.0

  Camera Raw 7.3

  Chalk and charcoal 13.0

  Charcoal 13.0

  Chrome 13.0

  Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 clouds (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  COLLADA 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Halftone color 13.0

  Color pencil 13.0

  CompuServe GIF 13.0

  Pencil tale 13.0

  Craquelure 13.0

  Crop and straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Crop and straighten Photos filter 13.0

  Hatch: 13.0

  Crystallize 13.0

  Cutting 13.0

  Features dark 13.0

  Deinterlacing 13.0

  DICOM 13.0

  Difference clouds 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Glow 13.0

  Move 13.0

  Dry brush 13.0

  Eazel acquire 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Embed watermark 4.0

  Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Extrude 13.0

  FastCore 13.1.2 routines (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Fiber 13.0

  Film Grain 13.0

  Gallery of filters 13.0

  Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Fresco 13.0

  Glass 13.0

  Scarlet contours 13.0

  Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Grain 13.0

  Graphic pen 13.0

  Halftone Pattern 13.0

  HDRMergeUI 13.0

  IFF Format 13.0

  Outlines in ink 13.0

  JPEG 2000 13.0

  Flattening coefficient 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Blur of the lens 13.0

  Correction of the lens 13.0

  Lens Flare 13.0

  Liquefy 13.0

  Operation of Matlab 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  maximum 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mean 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Measure Core 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Median 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mezzotint 13.0

  Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mosaic tiles 13.0

  Multiprocessor support 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Neon 13.0

  Paper notes 13.0

  13.1.2 color NTSC (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Ocean Ripple 13.0

  13.0 oil painting

  OpenEXR 13.0

  Paint Daubs 13.0

  13.0 palette knife

  Patchwork 13.0

  Paths to Illustrator 13.0

  PCX 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Photocopy 13.0

  13.1.2 Photoshop 3D engine (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Photo filter package 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Pinch 13.0

  Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Plaster 13.0

  Plastic wrap 13.0

  PNG 13.0

  Pointillism 13.0

  Polar coordinates 13.0

  Portable Bit map 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Poster edges 13.0

  Radial blur 13.0

  Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 range (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Read watermark 4.0

  Crosslinking 13.0

  Ripple 13.0

  Rough Pastels 13.0

  Save for the Web 13.0

  13.1.2 ScriptingSupport

  Shear 13.0

  13.1.2 asymmetry (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Smart Blur 13.0

  Smudge Stick 13.0

  Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Splash 13.0

  Spherize 13.0

  Sponge 13.0

  13.0 sprayed strokes

  Stained glass 13.0

  Stamp 13.0

  SD 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  STL 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Sumi-e 13.0

  13.1.2 summons (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Targa 13.0

  Texture veneer 13.0

  13.0 tiles

  Torn edges 13.0

  Watch twirl 13.0

  Draft of 13.0

  Vanishing point 13.0

  13.1.2 variance (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 variations (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Water paper 13.0

  Watercolor of 13.0

  Wave 13.0

  Wavefront | OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  WIA support 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Wind 13.0

  Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Zig - zag 13.0

  Plug-ins option and third parties:

  DAZ Studio 3D bridge 12.0

  DazUpdateScene 12.0

  Plug-ins that could not load: NONE

  Flash:

  Mini Bridge

  Kuler

  Install TWAIN devices: NONE

  The nomenclature "7800 series" seems good.  Here is what my system shows under Windows 7 with catalyst 12.8:

  ...

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  OpenCL Version: 1.2 AMD - APP (938.2)

  OpenGL, Version: 3.0

  Texture size video Rect: 16384

  OpenGL memory: 2048 MB

  The video card vendor: ATI Technologies Inc.

  Renderer video card: AMD Radeon HD series 7800

  Display: 2

  Limits of the display: top = 0, left = 1600, low = 1200, right = 3200

  Display: 1

  Limits of the display: top = 0, left = 0, low = 1200, right = 1600

  Video card number: 2

  Video card: Radmin V3 driver mirror

  Driver version: 3.1.0.0

  Driver date: 20070808000000.000000 - 000

  Video card driver:

  Video mode: 1600 x 1200 x 4294967296 colors

  Legend of the video card: Radmin V3 driver mirror

  Video card memory: 0 MB

  Video card: 1

  Graphics card: AMD Radeon HD 7800 Series

  Driver version: 8.982.0.0

  Driver date: 20120727000000.000000 - 000

  Video card driver: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

  Video mode: 1600 x 1200 x 4294967296 colors

  Legend of the video card: AMD Radeon HD 7800 Series

  Memory: 2048 MB

  ...

  I use Catalyst 12.8 pilots at the moment and have a Windows 7 system and have a remote access utility called Radmin installed, but I don't know if seeing that Microsoft based Render driver is provided on Windows 8.  It seems that this could be the key, as the basic OpenGL implementation of Microsoft is made all in software.  If somehow driver Microsoft took control and you don't get really the GPU acceleration, then that would surely make things really slow.

  Rafaello, you have updated drivers...  You can post your top of your system information again?

  Have you tried a full, complete deletion ATI driver and reinstall from for example, 13.2 beta?  Here is the removal of ATI tool:

  http://sites.AMD.com/us/game/downloads/pages/catalyst-uninstall-utility.aspx

  -Christmas

• Portege R400: Very slow Performance with Vista Ultimate

  Hi all

  Portege R400 is delivered with Windows Vista Ultimate 32-bit Edition and Vista is really - honestly - incredibly slow! (especially with R400, due to the configuration of the laptop)
  So I decided to install Windows XP Tablet PC... But I discovered that there is no driver available for R400 XP.

  I'm not directly complaining on the Portege models/series...
  It's a great design and I bought it, knowing the configuration. But I didn't know how Vista was eager for system resources...

  I complain on Toshiba policy or what-so-ever ONLY to the Vista and not XP drivers.
  Microsoft is desperately trying to sell Vista because they know, they really don't have this time and I heard stories about how they block their own market XP.

  .. .and I think that Microsoft and Toshiba can have an agreement on "selling only computers laptop Vista..." (just a guess but it seems so... correct me if I'm wrong)

  It is a torture to use Vista on Portege R400 and other equivalent configurations. (even when all the Visual effects system, disabled etc.)
  On the other hand, I can't use my XP on R400 tablet... so...

  So, trust me when I say I'm going to throw it away!
  But before doing this, if anyone of you knows a solution to my problem. Please let me know,
  because I paid a lot of money for this turtle.

  concerning

  PS: I hope that this is a democratic platform and my post not be erased or changed.

  Hello

  First of all, you don't have to suspect Microsoft or Toshiba has an agreement with Vista. Toshiba isn't the only primary selling units with just a VIsta operating system, almost every laptop to the manufacturer it.
  And you're right, Vista is a slow operating system, because it has a new UI with lots of graphic effects here and there and many features like the sidebar, you have really not at all.

  Since I bought my first one Vista laptop at the beginning of the year, I thought, as I don't want to not be installed and want my XP back and so on and there was no available to manufacturers of XP drivers download page either. I have a Toshiba laptop no and had the same frustration as you.

  Now, I had two options, check every important feature on my own via google or using tools such as engineering pilot or pimp my Vista driver installation.
  Firstly I did an installation of XP, all drivers to research, I need, who did not take my as much as I thought it would be. But after a while, I wanted to give the new Microsoft OS a chance.

  Used disk recovery and first wiped all the software I didn't need, so goodbye almost every tool installed on my machine, which was not unique to microsoft.
  Disabled many features, that I didn't want and I can say, speed increased a lot! This brought my buy an original version of Vista, made a new installation, installed all the drivers necessary, and hey, I'm happy with it.

  Thus, ended with my story, you have two options now. Search XP drivers on your own, using the tools and google or tweak your Vista. There are many guides on the internet that can help you.

  And do not be angry with Toshiba, as it's the same problem with other manufacturers too, as you can see in my case.

  HomerJ

• Need help with problems of performance with 14 elements

  I scanned the forums and provided below to help with feedback. At this point, the organizer of the elements is unusable for me - I'm looking for suggestions to help refine the installer to make it usable.

  MY SETUP

  • Just more than 50000 items in the catalog, about 95% of them are photos, videos of rest. 98% of the source files are on a drive to the server in my house, with a gigabit connection.
  • I left full recognition of faces (took two days!) and Yes, during that who was running the organizer was unusable.
  • My PC is an i7 - 4790 k with 16 GB of RAM. Windows Pro 10. Boot drive is SSD.

  THE SCENARIO

  I have a new series of images on my C drive local - images that I scanned, about 30 pictures. Using the view of the pane left records that I navigate to the folder on my C drive. If I move to the tab places it takes about 25 seconds to react and make enforcement appear the places page. If I then go to the people tab it takes about 75 seconds, for the application to respond. In both cases, the application is completely insensitive during the wait.

  Clearly, I can't clean my collection with this kind of response. So here are my questions:

  1. What are the key strategies to improve performance, given my configuration?
  2. Have I not too many objects in the catalog? Should I aim lower number? I saw that there is no actual limit but I feel Im beyond a theoretical limit of messages.
  3. Broken content is to catalog help with questions like this? Is there another internal setting, I should be updated or change?
  4. Given the number of images should I use Lightroom instead?

  The only change that I'm not going to do is to move all the content of my return to my local drive. Sound on the server so that it is completely backed up and protected. So I'm looking for ideas that help given this configuration.

  Thanks to everyone for their help.

  Mark

  mgill2012 wrote:

  .........

  Thanks to everyone for their help.

  Mark

  Mark,

  I can't offer a positive solution to your problem, but I hope to give you some answers or thoughts on this subject.

  Let's start with the description of your case: it's a perfect description of what has been reported in several positions:

  -powerful Installer (computer, SSD)

  -l' use of the recognition of people and/or geolocation

  -use of a NAS for the library.

  -Library of more than 50,000 points.

  -very long indexing, then extremely slow.

  I do not use a SSD (will probably later) or a NAS (I never do). I 65 000 objects and don't care about recognition of face or geolocation, which explains that with a basic setup on I3, 8 GB of RAM, I have an organizing extremely fast speed. Even on an old secondary computer with Vista, it is still quite manageable.

  Your choice is typical of advanced specialists and competent (I guess that less than 1% of the current user of items based). I have yet to see no answer (satisfactory or not...) Adobe staff.

  Given the number of images should I use Lightroom instead?

  I guess that's what Adobe could answer you... and that would be wise. You can use a trial version to make your choice and do a search on the forum for Lightroom. I have not seen similar, even if complaints with NASs, it seems to be a lot to say. Lightroom can convert your organizing catalogs (maybe some problems lately...)

  The only change that I'm not going to do is to move all the content of my return to my local drive. Sound on the server so that it is completely backed up and protected. So I'm looking for ideas that help given this configuration.

  If the use of the network is primarily to ensure maximum security (for not sharing images), why not would you use the choice to store your library on your computer (internal or external disk) with a sync to your NAS as a backup solution? I can tell you that my workflow includes Windows Synctoy to record each session easily and quickly (catalogs and libraries).

  Your very precise description of the case call to assess each factor of different performance individually. Even if the method above is not the final answer, it could shed light on the influence of the use of the network.

  1. Have I not too many objects in the catalog? Should I aim lower number? I saw that there is no actual limit but I feel Im beyond a theoretical limit of messages.
  2. Broken content is to catalog help with questions like this?

  Splitting the catalog is usually a very bad solution, a number of post seems to show that with the recognition of the people/geotagging, the problems around the range of 50,000 points. You can make a copy of the catalog and remove half of the files to check the influence of numbers point; Maybe it's possible with version 14 (deletion is extremely slow, but worked for me, even if it failed with older versions).

  Is there another internal setting, I should be updated or change?

  Sorry, I can't help you there...

  Other factors are using recognition Geotagging and people. Even if you absolutely need those features, disable to see their influence could help Adobe to solve performance issues.

• Mobile Home with Yosemite/EL Capitan record

  Hello everyone

  I have a small business with 30 macs odd configuration. The server runs 10.7.5 and 10.9.5 customers.  I have long and hard battle thanks to a non-existent documentation on records of mobile home that I managed to create a stable environment using Active Directory, Open Directory and WorkGroup Manager (MCX).

  With the slow death of the PCS I'm now migration 10.10.5 system (server and clients). I'm trying to set up mobile home folders by a manager of profiles installed on the mac server. The Profile Manager works well, but the correct configuration for mobile home folders still eludes me.

  Ist there a complete documentation available or there at - it someone here who could shed some light on the subject?

  Any help would be appreciated :-)

  Ralph

  If some thoughts.  If Active Directory is the center of your domain, then the Foundation of mobile accounts is really easy as all you have to do is to link the AD positions.  For a complete control I suggest to use directory utility to bind the work stations (you can use a Configuration profile, but I'll get to that in a minute).  Using the directory utility, you must check the option "Create mobile account when connecting".  And there you have it, the mobile accounts through AD accounts.  There is no need for OS X Server, or profiled PCS achieve mobile accounts with AD as your domain name.  Just go to the login window, waiting for others... to appear, then connect using the credentials of the AD.  Always check the details of the connection by using sudo dsconfigad - show that he has hidden options that may apply to your environment (passinterval, packet signing, package encrypt, etc.).

  Ah, but you receive no management.  Link AD authentication and authorization but also provides password policy.  But beyond that, there is no way to apply GPOS through the windows system.  This results in the old days of double lie, lie to AD as the master and then directory management OD get PCS settings to manage the account.  This era is over.

  Today, if you want to manage Macs in an AD domain, you through the Profile Manager, JAMF, Airwatch or all other MDM solutions out there.  If you build on Apple.app, you'll need an Open Directory as OD master is where the settings of the Profile Manager are stored.  However, it does not need to link workstations to OD, except if you need to create groups of proxies that can not (or will not) created in AD.  Instead, you must bind the workstations to AD and enroll them in the Profile Manager.  If you want to only manage at the level of the Group of devices/device (and you don't need to enter the unique users or kerberiser all services such as OS X Server file sharing) you should be able to even to get away without tying the AD server.

  So, as a test, try this with one of your machines.  This is the manual way.  Later, you can build effective as creating a profile of attachment to AD in the Profile Manager, allowing you to register only and so get what you need.  So get a trial of machines.  This assumes that AD is always at the heart of the area and you have the configuration correctly Profile Manager on the OS X Server.  (this assumes that DNS is properly set)  It also requires that you allow Push Notification works on your network.  If you are behind Proxy Auth, you have to do.

  1: take a test workstation

  2: link to AD to ensure that the plugin active AD support mobile home.  Remove the window confirmation so desires.

  3: Verify that you can connect with an AD account and that the account offline caches

  4: enter the Device Manager profile through the web registration page (https://your.server.host/mydevices)

  5: create a device group and apply your management needs.  Don't forget, mobility is NOT necessary that the AD is already the application of the mobile account.  Try something very visual such as changing the appearance of the login window.

  6: add your device to the device group.

  7: confirm the receipt and the application of your settings.

  And it has the basics.  From there, you can streamline by incorporating the AD link in the Profile Manager, allowing a single step instead of several.  In addition, if you know your serial number of the device, you can add or import records from the placeholder, which before people volume groups.

  I hope this helps.  In many ways, AD makes the process easier.  If you are dumping AD and going right OD, then use the charge of mobility and make sure your OD accounts have a value of path and of the shell in the right folder.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Why Lightroom 5.6 stopped mobile sync with Lightroom?

  All of a sudden Lightroom 5.6 stopped mobile sync with Lightroom. I created 3 new collections that I need to sync... and Lightroom for desktop computer is just sitting there saying sync 28 pictures (of which there are 39 to synchronize) and their synchronization does not despite being connected and saying sync is turned on.  What is going on?

  Could you try to delete the sync.lrdata file, and then restart LrD. It would restart/refresh sync (metadata only).

  Remove the Sync.lrdata can solve everything that is the question.  Or, at least, could trigger to reproduce. So to remove the Sync.lrdata start Lr and wait until he either synchronize or gets stuck again and creates a new diagnostic log that can at this stage we hope to provide some clues.

  You can find the file sync.lrdata here:

  On Mac, it's to /Users/Library/Caches/Adobe/Lightroom/Sync Data / Sync.lrdata

  On the victory, it would be in C:\Users\\AppData\Local\Adobe\Lightroom\Caches\Sync Data\Sync.lrdata

  You can trigger the journal diagnostig through Desktop LR-Mobile with Lightroom > preferences, and when you hold down the ALT key, you will notice a diagnostic log button to generate

  Please send me a journal diagnostig Desktop LR - better as a private message with a downloadable dropbox link.

  BTW. Are there listed in Lr Desktop Sync errors?

  Thank you

  Guido

• Apex 4.2.1 Mobile Page with several Branches of incorrect selection list

  I have a mobile page with only two values of the previous page display and a selection list allows multiple selections. Multiple selections and save your work very well, but the offshoot after treatment becomes crazy. It jumps around a few times and at least two pages to the home page. It works best with just a branch reported to stay on the page with the list of multiple selection, but the display success message and disappears quickly and with longer lists it branches sometimes still an old/outdated page with old values or the home page. Is this a known issue with APEX 4.2.1?

  Hello

  Indeed, it seems that the multi selection popup corrupts somehow the call stack mobile jQuery and when you click 'Save selection' he will try to restore the current URL, after he performed the AJAX call to send the page.

  As an immediate solution, you can enter

  $("#wwvFlowForm", apex.gPageContext$).attr("data-ajax", false);
  

  in the run when the Page loads on page 4 do not use an AJAX call for the 'Save selection '. Avoiding the trigger AJAX call a full page refresh which will also clean the call stack mobile jQuery.

  Will consider more far one let you only know where to look.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Very slow network performance

  I have a Dell T610 running ESXi 4 with a pair of built in maps network gigabit Broadcom BCM 5709, to which I've also added a gigabit dual port Intel 82576 NIC they are all plug a Cisco 3560 24 ports switch. There are a couple of virtual machines on this computer and there was near zero, a network, or activity of the CPU during the following tests as they were made during off-peak hours.

  I noticed a few updates takes a long time to download and, after completed and restarting the virtual machines, I decided to perform a speed test that indicates the very slow network performance. But the performance is slower on one NETWORK card to another. Reduce the ports available to virtual machines on a single NETWORK card, that's what I got.

  Using Speedtest.net as a gauge running on a dedicated XP Guest:

  The Broadcom and Intel befriended 5Mbps showed and sometimes 10 Mbps.

  Only Broadcom showed between 13-18Mbps from one trial to another.

  Intel showed only 4-5 Mbps. never more than 5 Mbps!

  Physical work stations connected to the same switch showed 45Mbps repeatedly!

  All ports were originally configured as auto negotiate. I tried locking time ESXi and the Cisco switch to 1 GB Full duplex with no significant difference in the overall performance.

  Has anyone seen this? Have you found a solution?

  I got a similar promblem - found that the VM - NIC has been set at the 'flexible' type and VM-Ware tools were not properly installed.

  As I was not able to install (linux, no gcc), I've removed the NETWORK card and put in again as an adapter 'e1000 '. From here, I had transferrates as expected ;-)

  I hope this helps...

• After update Macbook, I had a folder with question mark on it

  I was forced to upgrade my macbook, and then I saw a folder with question mark in this regard.

  Start your Mac by holding down the button Option. Who should start the Boot Manager window where you can select the startup disk, and then click Restart.

  Startup Manager: how to select a boot volume

• How to fix the folder flashing with question mark on mac pro

  I have a problem with my mac pro.  When I press the power on button, the grey of the screen become a folder flashing with question mark appears and it does not start.  What should I do?  I don't have an os x on a cd so I can not ignore the system...

  See:

  If a flashing question mark appears when you start your Mac - Apple Support

  What model Mac? What OSX version was on the Mac?

  If you do not have a partition recovery or restoration of the Internet

  On OS X Recovery - Apple Support

  Then you install an installation DVD

• 2008 mac book pro screen flashing folder with question mark at startup

  2008 mac book pro screen flashing folder with question mark replaced boot hard drive and cable, continues to do the same.  any ideas to fix?

  Start your Mac by holding down the button Option. The should launch the window of Boot Manager where you can select the startup disk, and then click on restart.

  How to choose a boot on your Mac - Apple Support drive

• Flashing symbols on startup: apple logo, circle with slash, folder with question mark

  I tried to delete personal files on my MacBook (late 2008) to trade. During this process, the computer lost some function when deleting some documents; would not open apps but app could bounce constantly once selected and would not restart or shut down, had to manually hold the power button to turn off.

  When I turned it back after a few minutes a blue splash screen came as normal then symbol of Apple but then started blinking circle with slash to Apple to the circle and then to the folder with question mark. This continued for more than 45 minutes + and whenever I try to turn it off and restart it manually.

  I tried the following:

  -Trying to access the disk now command + R to start utility

  -Unplug the charger and take out the battery and put back in

  -holding SHIFT while symbols are flashing

  I can't check what OS I currently use but care I have the computer are as follows:

  -Computer is late 2008 model MacBook 13 inch

  -Model: A 1278 (EMC 2254)

  -Storage: 160 GB

  -RAM: 4 GB

  -Processor: Core 2 Duo 2.0 13

  Looking for help solving this problem. Thanks in advance.

  It would be very helpful to know what version of Mac OS X you are running

  On the screens, you see when you start your Mac - Apple Support

• Expand the mobile hotspot with X 6

  Can I extend the range ATT mobile hotspot with this router? If so, how? Thank you!

  Hello @sneuhardt

  Welcome to the community!

  The only way you can extend the signal is if you can connect the R8000 to the mobile hotspot using an Ethernet cable.

  The R8000 is only able to Access Point mode.