Slow Page load after deployment

Similar Questions

• W7 Ent. SP1 x 64 clean install on the new PC - very slow to load after reboot during installation

  Hi all

  I'm busy to install W7 Ent. SP1 x 64 on two computers for a small organization non-profit of my friends, all the similar Assembly (motherboard: ASRock H81M-VG4, CPU: Intel Celeron G1840, transcend SSD). The first PC went perfectly, no problems with the installation at all. Now, I installed the second, but unfortunately the following happens:

  After restarting the installation, was asked to enter the name of the computer normally, and then to set up a password. When I clicked on next (and leaving the word password empty) the whole process seems to freeze a little, and then after a few minutes, I could choose settings updates, after which everything slowed even further. "Finalizing settings" took about three quarters of an hour. Once this done, all slowed even more, and it now displays a black screen telling me that this is not a genuine copy of Windows (had no chance to fill in the key product of course) and after about half an hour he is now "configuration of settings customized for xxxx".

  -EDIT - Windows has begin once (between my opening message and my second post), and it was terribly slow in everything that (like several minutes before opening anything). I installed the LAN driver with the idea of updating all the drivers, but after a reboot it is so late it now already taken 10 minutes to boot Windows (and is suspended in the Welcome screen again).

  I've done an another clean install after using DISKPART to format the SSD, but the same thing is happening again once unfortunately. I installed on a USB bootable, I used to install two other computers as well (one before this one and the other afterwards), and everything is fine with those. Swapping the RAM module for a good known has not changed the situation.

  All comments are welcomed, appreciated, thanks.

  All other essential drivers have been installed: video, Chipset?

  Try the SSD at the other system and see how it starts in the system causes problems.

  Also try the SSD with the painful installation in this computer to see if the problem persists.

  Could contribute to isolate if the SSD.

• extremely slow page loading since muse 2015.2

  Hello everyone, this is my first post here... Since upgrading to v2015.2 Muse my site seems to load extremely slow... is - anyone else experienced this problem? my site is www.zander-creative.co.uk. Thanks in advance.

  I had this problem on all my sites. Even on my last Web site template I created (18 August) in the latest version of Muse.

  But I found a solution here: white white screen during the loading of a Muse site

  I've added:

  At the top of the header

  And then in the footer

• Games slow to load after update graphics card.

  I have a Compaq presario sr5123wm. Running Vista service pack 2. Had trouble with him, stopping or freezing while playing games or or using the internet, it seened to do more if I tried to do more than one thing at a time. So I changed the graphics card Radeon HD 4550 and the power of 400 watts. I have also cleaned the inside, ran Norton scans and down the updates. This seemed to fix the lock ups. Now when I try to load the sims 2 it no longer responds and when I try to play world of Warcraft it loads very slowly. any suggestions?

  When you put you bump the memory to 4 GB?

  Best regards
  ERICO

• Query automatically considerably slows down the initial Page load

  I use JDeveloper 11.1.1.6 and I have a view object that contains a view of the criteria that I put on request automatically. This criterion of VO/view is then used on my page by default startup as a query with table component. Everything is functional but very slowly. I did some basic performance tests and it took 62 seconds from the moment I saw the blue spinning loading icon until the page appeared with the results on the initial page loading (after the page is initially loaded the query is fast). Then I disabled the feature of query automatically, and I could have the page do the initial load and run the query manually by 16 seconds. A difference! Is there anything I can do to speed up performance while loading the first page when you use the Query option automatically?

  Thanks Shay, I look at the logs with an increased recording and it seems that the query is only get executed once. I found a work around for this problem though. I've disabled the parameter Query automatically on the display criteria in the View object and then for links to the page where I am using this aspect of research and went to the properties of the search criteria under the executables section and changed the InitialQueryOverridden from false to true and now the query runs automatically in the same amount of time to do this manually a so no more time to wait very long at the initial loading of the application.

• 12 Firefox is very slow to load pages and if two tabs are open, it lag.

  12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help because it's driving crazy me.

  
  

• Web page loading - even with fast web connection slow

  Hello

  I have a macbook air from 2015, mainly using Safari for web browsing... I use wifi by Airport extreme base stations at home and work, all green lights of projection.

  Lately, web pages were super slow to load... Here's what I've done so far.

  • check internet connections and speeds at home and work - blazing fast in two places.  18-22 Mbps
  • checked using clients and computers of the family in two places - they are fine, so I know its my computer
  • deleted all historic web safari and cookie - no change
  • Chrome will run just as slow, so I know its not just Safari
  • check the DNS settings, bench name used google to make sure I'm on the right

  Any help would be appreciated!

  Uninstall third-party applications that claim to protect, clean, manage, etc of your computer. Remove the adware. Delete the browser extensions. If you are unsure of what is running on your computer download, install and run etrecheck (https://etrecheck.com). Post here the results of etrecheck.

• Https: / specific page does not load after udate to 38.05

  https://my.albertahealthservices.ca
  does not load after update of 38.05 on my desk.

  I tried it on my laptop and it will load BUT after having been undated to 38.05 also failed to load this page.

  Other secure pages (Bank) loading OK

  Works well in Chrome and IE

  Error message:
  The secure connection failed

  The connection to my.albertahealthservices.ca while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Thank you
  Brian

  The site may attempt to return to a lower version of TLS in a way that is no longer allowed in current versions or maybe use a deprecated suite of encryption.

  You can open the topic: config page through the address bar and use the search bar to locate this pref:

  • Security.TLS.insecure_fallback_hosts

  You can double-click the line to edit the prefs and add the FQDN (my.albertahealthservices.ca) to the value of this preference.
  If there are already websites (domains) in this list, then add a comma and the new domain (without space).
  There should be only areas separated by a comma in the column value (example.com,www.example.com).

  If this help you can contact this Web site and ask them to look into this and update their security.

  • https://developer.Mozilla.org/en-us/Firefox/releases/36/Site_Compatibility#security
  • https://developer.Mozilla.org/en-us/Firefox/releases/37/Site_Compatibility#security
  • https://developer.Mozilla.org/en-us/Firefox/releases/38/Site_Compatibility#security

• My Firefox cannot be used. It's very very slow edit pages, load pages and so on.

  I have search and applied several suggestions found in Internet, but so far, no one solves the problem. Firefox uses a lot of memory (600,000) and lots of CPU (100%) and work very slow to load new pages or update pages loading.
  I use APP "Memory Fox" but is the same.

  Hello VictorTrindade, please, try to reset firefox and see if that can solve the problem...

  Please also make sure that firefox is not blocked by your security/firewall somehow software.

• Very slow Firefox loading pages

  So many pages are really slow loading as minute, as Courier hot.EE youtube and many more. It started to happen when I updated to 20.0. Looked up a few suggestions and found that everything: config network.http.keep - alive using fake. And so I did and it worked, but the next time I opened firefox again, that it was slow to load again, but persistent is always false, all non disabled necessary plugins and extensions and I don't seem to find a solution. Been a user of firefox for a long time and do not want to change my browser.

  The new profile seems to work very well - don't know for how long, but we'll see how that goes.

• you use windows 7 firefoxis really slow, how can I fix that?, it's very slow to load pages on every website I go to.

  When broweing site different from the page loading takes forever

  To solve the problems of slowness are not specifically mentioned in this article, you need to analyze your computer of viruses, spyware and other malicious software and reading Firefox to solve the problems caused by malware.

  https://support.Mozilla.org/en-us/KB/Firefox-slow-how-make-it-faster

• 13 Firefox SLOW to load pages

  just updated to 13.0 Firefox on my mac last night (without plugins in order to not blame them!) ... the man his SLOW SLOW SLOW. Slow loading pages, slow to load and slow to open java (even more then before!) I have an i5 CPU and 8 GB of ram 1333 Mhz in my macbook pro... What is happening... seems that each new version is slower and slower!

  P.S. I switched to chrome because of it... lightning quick in comparison, it works!

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/reset-Firefox-easily-fix-most-problems

• Pages VERY slow to load from Firefox 6.0 download. How difficult or reinstall the old version please!

  As I downloaded the latest version - Firefox 6.0, I have some serious slow loading of the page. Nothing has changed in my PC or network configuration and in the past had a very fast loading everything, even the streaming of videos, etc.. The only thing I found in your help on pages loading slowly, it was something about a proxy Add ons question - but I have just activated. It seems to be worse when I submit a form-

  Try to clear your browser's cache.

  Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

• Internet connection fast but slow to load web pages

  I have a relatively fast internet connection: speed download - 60.5 Mbps; Download Speed - 6 Mbps.

  I get the same results on my MacBook Pro running on the wifi and my iMac which is directly connected to the Ether. On the iMac, however, it is now holding always load web pages.

  I've read elsewhere that changing the DNS can eliminate some of these problems.  All this is a little above my pay grade.

  I know just enough to make me stupid, but I am a good listener and I can follow directions well enough.  Any help would be most appreciated!

  Thank you

  KLOS

  Hello, KLOS,.

  Thank you for using communities Support from Apple!

  I understand that Web pages are slow to load on your iMac, but not on your MacBook Pro, while they are connected to the same network. If you use Safari, I suggest to work through the following steps on your iMac to see if you can alleviate the slowness.

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support

  See you soon!

• After xp reformat, pages load very slowly

  Recently reinstalled XP, I know it's difficult to diagnose problems with computer through forums, so I'm providing as much detail as possible. I have the same firewall, some of the same programs, same version of firefox, different av (disabled for a test, no change). I use a d-link adapter in a home network, there is no change, & there is NO MALWARE on here. I can't understand why every site I click loads so SLOWLY. Before the reformat, when I had a few problems of operating system, the pages loaded quickly. You would think that after a reformat, its similar with a new pc once again, that this would not happen. The pc boot faster that before, without problems for you to connect to any site, just very frustrating having to wait anywhere from 10 seconds to 45 seconds for a page to load. I understand there are different variables that come into play, to connect to a site, but it happens on all my favorite sites & anything I click on that. If anyone can help, I'll check back on here regularly to answer as soon as possible. THANKS for your time/help.

  Let's just double-check something basic with the network... just to play it safe.

  Start with http://www.pingtest.net/ Please share your results.