Small desktop Inspiron computer (3647) Driver Issues Please Help

Similar Questions

• Unable to connect to the internet/driver issues please help :(

  Hello. I installed a new copy of Windows 7 Ultimate 64 bit on my computer. Everything works well except for two pilot numbers. I also can't connect to internet at all no more. I guess it's because of one of the pilots. The two drivers that I have problems with the network controller driver is a unknown device in the PCI Bus. Nothing is connected to this Bus by the way. It just says: unknown device. My laptop is a HP Pavilion G6 2123us. I tried all the drivers for this laptop on this site and none have seemed to solve the problem. I looked really hard now and it's pretty frustrating

  More information that I can give is the ID of equipment for both pilots:

  Driver network controller hardware ID:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  PCI\VEN_168C & DEV_0032 & CC_028000
  PCI\VEN_168C & DEV_0032 & CC_0280

  Unknown Device hardware ID:

  ACPI\HPQ0004
  * HPQ0004

  I wasn't sure what hardware IDs to give, so I just posted all the. I hope someone can help me please. I greatly appreciate it.

  Hello:

  You need this driver...

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  and this driver...

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105047-1&CC=US&DLC=en&LC=en&os=4063&Product=5273777&sw_lang=

  Paul

• my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  You already have disk cleanup?

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

  The Atlantic tutorial has 2 parts:
  Step 1 to 11 is for the classic disk cleanup which will give you back some disc FEPs.
  Step 12 until the end (more), is to delete all except the most recent restore points. This will give bring you a ton of disk space.
  ATTENTION: Make sure that your computer works OK because you delete restore points.
  You have no past point to fall up to restore more new restore points are created.

• I need help to disable Adobe CS6 on a device that was stolen and I have more access to what I can reinstall on a new computer. Can you please help?

  I need help to disable Adobe CS6 on a device that was stolen and I have more access to what I can reinstall on a new computer. Can you please help?

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• Small blue screen issue Please Help

  Hello

  I turned on my pc this morning an appeard blue screen with something like the following below.

  I've never seen before read something like - if seen first computer reboot /hardware - then went to connect (before I pressed F9 - diagnostic tool

  to see if something was wrong--all passed) then watch Windows error recovery screen I pressed "Start windows normally" because I don't know what the other 3 meant that I'm not this technique.

  Logged in - Message appeared "Windows has recorved against an unexpected closed, a windows problem caused to stop working correctly". I looked at the event log, but I have no idea what I want to really, I vacuum the back on pc - the dust ect... Please help because I do not want to see it again / please if anyone is nice enough help me please that they have no basis.

  I'm running Windows Vista Home premium service pack 2

  I look forward to your reply.

  BS

  I understand.  The files are newspapers of accidents and have nothing to do with your operation systems.  You can do what suggests the wiki for when access is denied without too much worry about a problem

  Try this

  If you get "access denied" try this method

  First, create a folder on the desktop and call Minidump

  Open the C:\Windows\Minidump folder and do the following:

  Home > select all > Home > copy to > choose location > Minidumps > copy

  Then right click on the Minidump file > Send to > compressed (zipped) folder.

  Then download the compressed (zipped) folder newly created on Onedrive and provide a link here.

• HP 15-g092sa driver Ethernet, please help!

  Freshly bought hard drived formatted and proffessional for 64-bit Windows 7 installed. It starts, and there is no drivers for anything! I looked at http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=uk&dlc=en&sw_lang=&product=7255... where all the drivers should be, but there is almost nothing?

  Anyone know where I can find a usable for the Ethernet card and/or the adapter driver wireless for this laptop? I need to get on the network, and I should be able to fix everything else from there!

  Hello:

  Your laptop is not supported by HP for all the operating systems windows, but windows 8.1

  You can tell by the lack of a full range of W7 drivers as you observed it.

  It is a model that is very difficult to get W7 to work on, but I scroll you through the process...

  First, install the AMD chipset drivers and restart.  You want the first file on the Web page.

  To install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Graphics card: download and run the driver W8.1 of support for your laptop and driver page.

  If you install the graphics driver automatically, great.  I don't think he's fine.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135683-1&cc=us&DLC=en&LC=en&OS=4158&product=7255445&sw_lang=

  So, the next step is to install the driver manually as follows...

  Go to Device Manager and click to expand the category graphics cards.  Click on the VGA Standard card.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp67327.

  Make sure that the include subfolders is selected and the driver should install.

  Reset.

  Audio: Accept the agreement. DL and install second driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Ethernet: DL and install second driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Card reader: DL and install the driver first on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Webcam:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131219-1&cc=us&DLC=en&LC=en&OS=4158&product=7255445&sw_lang=

  This should be most of them.  If you need more please let me know.

• Desktop version going mobile in browsers, please help.

  Hello, I created my site in Muse CC 2014.2

  I downloaded the site using the FTP method (dreamhost is my hosting site)

  It works perfectly well in the mobile version, I am not sure of the Tablet, but I know for certain it does not work in one of the other browsers.  It will start correctly in Internet Explorer until I have play with links and then some how it goes back to the version of the phone.  In chrome, it goes directly to the version of the phone, even with FF and Safari.

  I looked at other threads here to find a solution, but I have yet to see someone with that particular issue.  If anyone has any suggestions on how to fix it, I'd appreciate it.

  My site is www.evoluerthreefive.com

  I checked the site at my end, and I see it loads fine in all browser and is not redirected to the mobile version open in my computer. Could you please try clearing the browser's cache and cookies, and check them off?

  Could you please share a short video demonstrating the question in front of you?

• SP2 will not install to my computer, and it is causing problems with my computer... Please help...

  Hey guys,.

  I'm trying to get my computer up to date, but I keep getting some Error 80070002, idk how do I know which one I have, but my computer will not install this update. Please help me, you can send me an email to * address email is removed from the privacy *.

  Do you have stopped the service, deletion of the temporary files and restarted the service, such as advised by Microsoft?

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• Hi people I have some hard drive problems, please help :)

  Hi guys, I just bought a Sata HDD internal 2 TB, but I do not see it in 'my computer', but when I go to computer management I see, I tried to do something with it, but an error pops up, I treid deleting and creating a new partition, but just before the end, I get this error : "The operation failed to complete because the disk management console view is not updated.  Refresh the view by using the refresh task.  If the problem persists close the disk management console, then restart disk management or restart the computer. "Please help. TNX

  Did you try to restart and try again as he proposed?  Assuming that you I had two ideas.  First of all, if your system is not aware of Windows updates, I would now.  Secondly, I have had good success called Easeus Partition Master that you can download from http://easeus.com .  I see they have a page for a free version 9.1 for users running the environments of 32 and 64 bit to http://www.partition-tool.com/personal.htm .

  I hope this helps.  Good luck.

• VIP - ANALYZE Configuration Issues - Please help!

  Hello world
  
  First of all I ask you guys to Please HELP SOLVE ME THIS PROBLEM – thank you!
  
  I am installing grid Infrastructure Oracle 11 g 2 11.0.2.0.3 on Oracle Solaris 11.11 x 86 64 bit installed using Live Media on Oracle VirtualBox 4.2.6.
  
  After you have configured the nodes in the cluster, I ran the cluster verification utility that came out with 100% success.
  
  However, during root.sh run, I get the following error:
  
  /U01/app/11.2.0/grid/root.sh
  --------------------------------------------------
  CRS-4266: Vote or managed to replace the files
  # File group universal name Id disk STATE file
  -- ----- ----------------- --------- ---------
  1. online 4a3543261bc34fc9bf6e41b5d7fa04c8 (/ dev/rdsk/c8t2d0s1) [OCR]
  Located at 1 vote (s) disk.
  CRS-2672: attempt to start 'ora.asm' on 'sol1.
  CRS-2676: beginning of "ora.asm", the successful "sol1"
  CRS-2672: attempt to start ' ora. OCR.dg' on 'sol1.
  CRS-2676: beginning with ' ora. OCR.dg' on 'sol1' successful
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n... failed
  FirstNode configuration failed on line /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm 9196.
  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  I have re-run this command to see the real errors
  
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n
  ------------------------------------------------------------------------------------
  RPRC-1013: failed to start of ora.net1.network resources
  RPRC-1064: failed to start of ora.net1.network on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  RPRC-1079: failed to start of ora.sol1.vip resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to place the "ora.sol1.vip" resource on which will achieve its investment policy
  RPRC-1013: failed to start of ora.ons resources
  RPRC-1064: failed to start of ora.ons on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  
  
  I ran the following commands to know the State of SAN and SCAN-headphones
  
  srvctl status scan
  --------------------------------
  VIP scan1 SCAN is enabled
  Scan1 VIP SCAN does not work
  VIP SCAN scan2 is enabled
  Scan2 VIP SCAN does not work
  SCAN VIP Scan3 is enabled
  Scan3 VIP SCAN does not work
  
  srvctl status scan_listener
  --------------------------------------------
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is not running
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is not running
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is not running
  
  srvctl config scan_listener
  ---------------------------------------------
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  
  Here is the content of my/etc/hosts and /etc/resolv.conf files
  
  cat/etc/hosts
  -----------------------------
  # Public
  192.168.56.101 sol1.localdomain loghost sol1
  192.168.56.102 sol2.localdomain sol2
  192.168.56.160 solfiler solfiler.localdomain
  
  # VIP
  192.168.56.111 sol1-vip sol1 - vip.localdomain
  192.168.56.112 sol2-vip sol2 - vip.localdomain
  
  # Private interconnection
  192.168.0.101 sol1-priv sol1 - priv.localdomain
  192.168.0.102 sol2-priv sol2 - priv.localdomain
  
  # Scan
  #192.168.56.201 ground-sweeping ground - scan.localdomain
  #192.168.56.202 ground-sweeping ground - scan.localdomain
  #192.168.56.203 ground-sweeping ground - scan.localdomain
  
  
  cat /etc/resolv.conf
  ------------------------------------
  #
  # AUTOMATICALLY generatedFROM_SMF_V1_
  #
  # ATTENTION: THIS FILE GENERATED FROM SMF DATA.
  # DO NOT EDIT THIS FILE. CHANGES WILL BE LOST.
  # See /etc/resolv.conf (4) for more details.
  
  Search localdomain
  nameserver 192.168.56.101
  nameserver 192.168.56.102
  nameserver 192.168.1.1
  
  
  Here are the details of the network
  
  dladm show-phys
  ----------------------------------
  MEDIA SPEED DUPLEX LINK
  Net1 Ethernet up to 1000 complete e1000g1
  NET2 Ethernet up to 1000 full e1000g2
  Net0 Ethernet up to 1000 complete e1000g0
  
  ipadm show-addr
  ---------------------------------
  ADDROBJ TYPE STATE ADDR
  127.0.0.1/8 ok static lo0/v4
  Net0/v4 dhcp ok 10.0.2.15/24
  Net1/addr static 192.168.56.101/24 ok
  NET2/addr static 192.168.0.101/24 ok
  OK static lo0/v6: 1/128
  Net0/v6 addrconf ok fe80::a00:27ff:fe5f:f484 / 10
  
  
  I did the nslookup on my name SCAN
  
  Nslookup ground-scan
  ----------------------------------
  Name: sol - scan.localdomain
  Address: 192.168.56.202
  Name: sol - scan.localdomain
  Address: 192.168.56.203
  Name: sol - scan.localdomain
  Address: 192.168.56.201
  
  I ran the following commands to see if the installation process correctly reads my SCANNING configuration
  
  srvctl stop scan_listener
  srvctl stop scan
  
  srvctl config scan
  -----------------------------
  SCAN name: ground-scan, network: 1/192.168.56.0/255.255.255.0/net1
  SCAN VIP name: scan1, IP: /sol-scan/192.168.56.203
  SCAN VIP name: scan2, IP: /sol-scan/192.168.56.201
  SCAN VIP name: scan3, IP: /sol-scan/192.168.56.202
  
  So it's good reading ANALYSIS information there is so no problem
  
  I tried to start listeners to SWEEP and ended up with the same mistakes
  
  srvctl start scan_listener
  ------------------------------------------
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN1. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN1. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN2. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN3. LSNR' on which would meet its investment policy
  
  If it helps, I use automatic network default Solaris 11.11 management but I changed IP addresses of net1 and net2 manually to meet my network
  Requirements for the clusterware.
  
  I followed all the steps of the system requirements for installing under solaris 11.
  
  After checking everything I could have as detailed above, I'm now helpless as to where things go wrong
  
  What is automatic 11.11 Solaris network management that does not allow the creation of addresses IP SCAN VIP?
  
  Once again I ASK YOU GUYS to Please HELP me THIS PROBLEM FIX.
  
  Concerning
  Terry.

  Hello

  the problem is the host name of the server is resolved is on the 10.X.X.X network.
  For example, the cluster requires the public network to be on this network. And the error you get, because this network is on DHCP.

  If you have the following options that you can try:
  a.) change the server to have the host name to resolve to the 192.X network
  (b) change the order of the network adapters
  (c.) remove the network 10.X.X.X at the moment of installation

  Concerning
  Sebastian

• !!! Very Urgent - Production Issue - please help

  Hello IDMers,
  
  We are facing a problem in production, we have updated the AD process form yesterday. Two fields Type Employee and Employee ID field as a process user AD had up-to-date for all existing users. These two fields are now empty for all users.
  
  But these fields have the appropriate value in the User Table of Xellerate for all users. Now I need to some how fill in the Type of employee and employee ID for all employees of the User Table to your AD process.
  for example: consider an employee called Pierre - type emp is full-time and Emp ID is 100; i'm in the IOM user Table, but this user is configured with AD and now I have to update his AD process form so that these two fields are filled. I need to do it for all users of the IOM. I suppose pre-population adapter triggers only when the form is created for the first time. Please suggest me some ideas.
  Is there an easy way to do this task?
  What is my way of thinking, I need to have a scheduled task that basically loop through all users and updates of their field and the employee id as the user Xellerate Table AD user.
  
  Please help me with this because it is very important.
  Thanks once again everyone else for your support all this while.
  
  Kind regards
  ~ THE VSN

  You want to send this info to AD?

  If Yes

  CHS task to create and update the form of process by using APIs.

  If not

  Solution 1:

  Use DB query to be updated directly as a database if you have access (never Recommneded) but the task of 1 minute to do this.

  Solution 2:

  Create CHS task to run the DB query.

  Solution 3:

  Check the VSH utility that comes with IOM.

• Install the second HARD drive in my Inspiron 1720... : () Please help with this one

  Hello

  you just bought a faster (7200 RPM) 60 gb 2.5 "SATA (of course) for my Inspiron1720 - idea is to keep the system on it.

  Anyway, opened the Bay where are hard disks, and I noticed there is some sort of connector for my current hard drive (the thing has a kind of bent pins to plug the drive hard vertivally)

  because I don't want to replace it, to add another, I am devoid of this connector, faq explains only how to replace not add a second.

  Summer:

  http://dellcommunity.com/supportforums/board/message?board.ID=cc_faq&message.ID=350

  that read, however it means only (part number) type PATA and SATA got :(

  Now, I spent all day in the city, searching ebay and allegro (sort of Polish to ebay ;])

  Couldn't find it anywhere, so how can I connect the new drive?

  I couldn't find info about it on the net, so it's not a common problem, so how people add new hard drives to their 1720s?

  So what now? is it possible to get this connector? what I buy from Dell? : smileymad: (that would really bother me) or should I have got one when I bought my inspiron? (don't have the box at the moment, is in my second home, so can not verify)

  Will be much gratefull for info, as it starts to irritate me, can I just plug into my new hard drive in a DELL computer.

  See you soon

  Tomek

  
  

• What it means when he says that the installer needs a new drive? Please help if I install sim 3 in my computer... pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee help me...

  Ideas:

  • You have problems with programs
  • Error messages
  1. Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  lailaatiqah,
  If Sims Setup calls for another drive then I guess it's looking for a second installation disk or it has encountered an error and can not read the disk it uses currently.  Make sure your disc is clean and Unscratched.  If yes you can check with the Support of EA , because they are the creators of The Sims. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help to update driver? Please help as ive come out of resources!

  Hi, here is the problem. my pc stopped working just before Christmas. I took it to a local pc repair shop and they re-installed windows for me, im imaging they stripped my pc down to the bare minimum. I used to be able to play games online with no problem, but now it won't let me. a friend suggested that I update my driver. He told me to go to windows updates and update from there. only problem is there is no update here for that! I don't know the name of my driver to this effect cannot go directly to the site to download - suggestions or details on how I can get my pc until it was?  Be specific with your responses as im a bit stupid with pc - thanks xxx

  Right-click on the my computer desktop icon > Manage > Double click on "Device Manager " > Double click on display adapter & it will prolong below > ""

  And then double-click the expanded item or just below the point which will take you to its properties >

  Now, write down all the details there & we reply with the name of graphics card. The driver version that is installed.

  You should also try to tell us the name of the motherboard OEM & model number or the motherboard Chipset, CPU etc. brand

  Another method for studying the device display hardware & driver:

  1. Run the command "dxdiag ' '.
  2. Wait for some time to complete the scan.
  3. Click on "save all information".
  4. You must save a document text (Notepad) on your HARD drive.
  5. Then copy the content of document (up to Sound devices header to the beginning of the text) [do not copy in whole as it is a bit large file text & some information in the text is unnecessary for your case]

  You should let know us that your PC is a an o assembled an OEM brand (for example-HP, IBM etc.).

  After the display of your reply device, we will suggest the appropriate driver.
  

  S.Chatterjee

• AUDIODG. High CPU usage EXE on NEW computer... Please help

  Why is AUDIODG. EXE using so MUCH CPU usage?  I just bought an HP computer brand new a week ago and from day kept getting Norton notifications file audiodg.exe use up to 100% of the cpu.  I googled this searched and searched for help and tried everything suggested as I disabled the improvements in reading, I run the boot, I check to make sure that all THE devices were up to date, etc, etc. Nothing has worked.  I am extremely frustrated by the fact that it's a brand new computer and already problems with windows pre-installed. (I am running windows 7)  Also to note, that I don't receive these alerts cpu high when you listen to music or anything else, what happenes even if I use the desktop themes pre-installed or multitasking with many files opened, etc.  If anyone can help, please advise how can I avoid this file so cpu.  Literally hold it the computer where I have to wait to type or open a file or something else.  So it's very, very annoying! the computer specs are: AMD processor A6 - 3600 APU with Radeon (tm) graphical HD 2.10 GHz, 6.00 (5.48 GB usable) GB memory (RAM), 64-bit, Windows 7 Home Premium operating system.  If anyone can help I'd be really grateful!

  Have you tried to disable the improvements on the playback device?
  Right click on the speaker icon in the notification area, and select playback devices, select your audio device and click Properties. Go to the enhancements tab and check Disable all option improvements.