Small network server

Similar Questions

• Network connections small business server 2011 does not start

  IV installation Small Business Server 2011 in a new site. Initially, I set up in the workshop and installed open office 2010, Manager of symantec endpoint protection (not client) and shadow protect for backups. When I got on-site network connections service wouldn't start and everything which needed high permission would not be executed. I have disabled UAC in the registry for the directory services restore mode and it gave me more access but would not start the network connections and 5 exchange services start. any ideas? Thank you

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Small Business Server and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support you

  http://social.technet.Microsoft.com/forums/en-us/categories/

• How to change the record to a local drive on network drive for all users (Small Business Server)?

  I need to implement a change on the backup to a local drive to save to the network drive/folder to 15 users in a Small Business Server, can someone help?

  Thank you

  Hi Frydom,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forums.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Windows Small Business Server 2011 Standard access to download

  Hello

  I need to access a copy of the Small Business Server 2011 Standard edition since the MSDN site, in order to help one of my clients.

  They have SBS 2011 standard installed on their network and I'm going to make some big changes to their network. To do this I need to access the installation (file ISO DVD) on MSDN disc. They have the product key, but not the original disks that were used to install SBS 2011 Std.

  Thank you for your help.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• Pix 501 for Small Business SERVER 2003 configuration problems

  I am new to cisco equipment. My company recently purchased a firewall of Pix 501 unlimited number of users, it is connected to an internet connection by cable with a dynamic ip address. Internet works fine and so the dhcp server.

  I have a Windows 2003 Small Business Server on our network. I need to configure the firewall to forward ports on the SBS server for remote web workplace.

  Also about a week ago I lost connectivity to the GUI of PDM via my web browser. Telnet and console work perfectly well.

  I enclose my config file.

  Any help will be appreciated. Thank you

  Ed

  FIRT off, you do not have a group-access instruction set for one of your ACL. This means that you have blocked all inbound traffic. You also have your incorrect static instructions. You can start by cleaning your config and enter the correct commands, you should be able to stick to your firewall config mode:

  No list will host 192.168.1.1 acl-enabled access 192.168.1.1

  no access list acl_outside not allowed tcp any any eq www

  no access list acl_inside not allowed tcp any any eq www

  no access list no incoming icmp permitted any one

  No list of permitted no inbound tcp access any host 24.50.241.113 eq https

  No list to access acl - permit gre 192.168.1.1 host 192.168.1.1

  No outside_in not allowed access list tcp any host 24.50.241.113 eq www

  not static (inside, outside) tcp interface www SBSServer www netmask 255.255.255.255 0 0

  not static (inside, outside) tcp interface https SBSServer https netmask 255.255.255.255 0 0

  not static tcp (exterior, Interior) interface www SBSServer www netmask 255.255.255.255 0 0

  not static tcp (exterior, Interior) interface https SBSServer https netmask 255.255.255.255 0 0

  static (inside, outside) tcp 24.50.241.113 80 192.168.1.69 80 netmask 255.255.255.255 0 0

  static (inside, outside) 24.50.241.113 tcp 443 192.168.1.69 443 netmask 255.255.255.255 0 0

  access-list OUT-IN permit tcp any host 24.50.241.113 eq https

  access-list OUT-IN permit tcp any host 24.50.241.113 eq www

  allow to Access-list OUT-IN a whole icmp

  Access-group OUT-IN in interface outside

  What ip you are trying to access your pdm of? the looks of configuration http correct, unless your coming to one other than 192.168.1.x ip address

  Let me know if it works

• Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

  Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

  I tried to provide screenshots - insert an image does not accept.

  

  

  Just happened while the iMac was asleep.

  Thanks in advance

  Tony

  The image seems to reflect the possibility of problems of graphics processor.

  Some models had a history of failure or bad solder connections. others may

  have a combination of capacitors & other materials; Finally we have to fix.

  https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

  One of the remedies for a graphics card problem, is a re - weld made by the

  users who have taken their card from the computer & their cooked in the kitchen oven.

  This idea has worked for some; You may be able to contact an authorized Apple

  Service provider or see if any of the parts suppliers in line can answer questions

  availability of replacement given to nine graphics cards, if you were

  can be removed from the logic board or if it is affixed, or welded to the card.

  An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

  can show that if that article can be virtually eliminated, if if will show process.

  https://www.iFixit.com/device/iMac_Intel_24%22

  The details of the computer in the bottom of your post isn't an iMac G5 model, and

  There is no powerPC G5 processor equipped Macs after late vintage

  2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

  and would be a model of Intel. They use a different architecture than G5

  powerPC even though in some respects are similar at least in the General design.

  This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

  https://www.iFixit.com/device/iMac_G5

  If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

  Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

  the Visual problem on the screen; an underlying hardware problem is a likely cause.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

  Introduced April 2008

  Abandoned March 2009

  IMac8, 1 model identifier

  Model number A1225

  EMC 2211

  MB325LL/A order number

  First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

  You may be able to find the numbers of reference and research for replacement new or repaired

  old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

  It failed due to a graphic processor; where she lived the BestBuy did not fix

  She even if it has been purchased by them with their extended warranty; No applecare.

  So, there are some out there in almost perfect condition, but not fixed, always.

  Do not know if the charges involved would be the value relative to the other

  later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

  Sorry I don't have any new ideas regarding this problem.

• T200v server with Windows Small Business SERVER 2003

  Just ordered a server TS200v, can I install Windows Small Business SERVER 2003 on this server, or do I have to upgrade to Windows SBS 2008?

  Hello

  SBS2003 is not officially supported, I think that 2008 alone is. You can try but might be a problem with some drivers.

  J.

• Get information about the file from a network server

  I need to keep some files sync would be between a cRIO and a network server. I would query the server for file sizes, then I can compare file sizes with local cRIO and FTP files on all files that are not current. For the local computer (cRIO), I can use the "file Info" function of pallets. Hoping that I can use the same function to query the network server, but do not know how it works; the IP address of the server is part of the path to the file? If so, what is the syntax for that? If this does not work, or if there is a better way, how would I go on this subject?

  Thank you

  lmd2

  Do it as you would from your Windows machine.  For example:

  \\computer name\folder\blah.txt

• Windows Small Business Server 2011 - "windows setup cannot continue because a required driver could not be installed.

  Hello

  I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:

  Windows Setup cannot continue because a required driver could not be installed

  I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Backups fail on Small Business Server 2008

  We have a Small Business Server 2008 which has only backup, with the following error;

  Backup started on October 3, 2014 10:30:07 'failed with following error code ' 2155348010' (one of the backup files could not be created.). Please rerun backup once the problem is resolved.

  We reformatted the drive, it works fine, but not the backup server to it.

  Anyone has any ideas what might be causing the problem?

  SCS

  SBS is outside the jurisdiction of sites.  Questions for this should be asked on Technet

  http://social.technet.Microsoft.com/forums/en-us/home

• outgoing faxes of Small business server 2008 does not

  I have a Wnidows Small Business Server 2008 running in 64-bit. I have 2 US Robotics modems attached to the server with the fax server role installation. Can receive faxes on both machines, I'm unable to send faxes on one or the other. Spoke about this problem at U.S. Robotics and did all the troub; e SHOOTING they asked and their answer is maybe to try to reinstall the Fax Server service. It seems resonable? If I do what are the procedures that I must take inorder to completely remove the Fax Server Service in order to get a clean reinstall of it? Thanks in advance for your help.

  Hello

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to Windows Server - Domain (VPN) and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  LC

• Small Business Server 2011 hangs on 'Apply the settings of the computer' at startup

  Small Business Server 2011 hangs on "Applying computer settings" on startup and can only start in safe mode

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/SBS/gg985359

  Hope this information helps.

• Small Business Server 2011 Standard

  Could not change domain.local to domain.co.nz on Small Business Server 2011 Standard

  Hello

  Your Windows question would be better suited in the Technet forum.  I suggest that you post your question in the Small Business Server forum.

  Small Business Server
  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Thank you