drag cursor problem

Similar Questions

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Mouse cursor problem

  After a few hours, my mouse cursor gets... weird. She becomes a fatter version of himself (in his goal a bit biased as well) with multiple copies, overlapping itself in different colors. The cursor "hovering on the text" is not affected, its 'I' used remaining shape, but others, including the slider "arrow" by default and the "hovering on the hyperlink pointing to the hand" is weird. Turning on the traces of the mouse leaves a copy of the weird arrow cursor, but the normal mouse comes back and works well.

  So, basically, how to avoid this strange, large, multicolored, slider which came into existence, and the case of activation of the traces of the mouse * is * the only way to turn it off, how can I get rid of the weird, big, multicolored cursor unsightly that lingers on my screen? Virus scan has not turned up all wicked. Would it be a specific program (it's a gaming computer and not all games are perfect...) which irritates my computer in a certain way and results do?

  NOTE: I use a special gaming mouse or anything like that. It's a Dell which came with a (different) computer that I got years ago. Device Manager indicates that the drivers are up to date. I don't think it's a problem with this mouse especially, but I have no real way to check a different mouse on this computer without having to buy one.

  Thanks for reading.

  I'd be willing to bet that it's your video card driver.  My Dell has an ATI video card and it happens sometimes.  I have a graphics card dual monitor and oddly enough happens that on my primary monitor - display of the cursor on the screen 2 is not affected.

  ATI made a patch for cursor problems, unfortunately the Dell that I use is in a corporate environment and they did not find enough critical to give me the patch again.

  You could try the Dell support page, go to the downloads section and make sure you have the latest video card driver.

• Focus cursor problem: I can't get my cursor will appear in a search box

  Original title: Focus cursor problem

  I can't get my cursor will appear in a search box (e.g., Google, amazon.com, etc.) in Firefox Version 16.  It seems to be a kind of focus problem.  Is it a Firefox problem or a problem of Windows 7?  Could this be a script problem?  Thanks for any ideas on how to solve this problem.

  Hi Letaiyo,

  You are welcome.
  
  I am happy to learn that the problem is solved!
  
  Your efforts to solve this problem is appreciated.
  
  Thank you for sharing your information on the way in which you solved the problem.
  
  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.
  
  Thank you.

• Windows 7 displays the error message when you exit + cursor problem

  Two issues here. Phoshop CS5 on Wind 7 64-bit.

  Number of physical processors: 8
  Processor speed: 3073 MHz
  Built-in memory: 12279 MB
  Free memory: 9577 MB
  Memory available to Photoshop: 10934 MB
  Memory used by Photoshop: 80%
  Tile image size: 128K

  First issue is since the last update automatic Adobe (why fix what is not broken?) Whenever I go out now Photoshop I get the message "Server QT Adobe has stoped working" and sometimes when I go out the bridge. InDesign behaves as evil. I can no longer start a previous document in the file without ID Manager crashing on.

  The other is the sliders in the Clone and delete lose their advantage (become invisable) without any reason - well not quite. Noise Ninja crashed in Photoshop when I tried to use it. I reinstalled it and all is well. The issue of cursor seems to be intermittent but came back (for no reason), after that I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem now seriously affect how I work. Almost any return to Win XP, who ran perfectly in Photoshop CS5.

  Any help will be accepted with gratitude.

  Doug

  Cursor problems are known to be caused by outdated video drivers (nVidia).

  Assuming you have a nVidia (which model?) video card, go to their web site and download and install the latest video drivers for your card.

  Also, this could very well solve your crash.

  Don't forget the video drivers to apply the OpenGL system, on which Photoshop relies heavily.

  -Christmas

• Drag & Drop problem with Workstation 9

  Hi I'm under WorkStation 9.0.1 build-894247 on a 64-bit Windows 8 host.

  I'm having a problem with drag-and - drop files between the host and the guest.

  Here's what I found;

  • If I run that high Workstation (IE "run as Administrator") then I can only drag files from the client to the host. Drag files between the host and the guest, I simply "cannot delete here" mouse cursor.
  • If I'm not running workstation high so I can just drag files between the host and the guest. When you drag the client files the mouse cursor stops at the border of the comment window.

  I have all the options set in the settings of the computer prompted virtual isolation.

  I get the same results with various Windows OS such as Linux clients.

  I'd like to at least know if someone else has this problem.

  (Performance of the latest tools 9.2.2)

  I answer to my orig post as Workstation 10 fixed drag & drop the issue.

  I had a client silently stop accepting drops well and had to reboot to get things working again - but I'll keep for a new discussion if he continues to be...

• cursor problems

  Hello

  The cursor on my MacBook Air selects texts, emails or icons out of the Blues; the cursor moves to other locations during the strike and does not allow to type a complete sentence. I disabled all the gestures the trackpad section of system preferences, I started the Mac Safeboot mode a couple of times and nothing has solved the problem. It's a MacBook Yosemite 10.10.5 2012.

  Any suggestion on how to solve this problem?

  Thank you

  There are several possible causes for the behavior. Please take each of the following steps that you have not already tried until it is resolved. Some may not apply in your case.

  1. follow the instructions provided in this support article, so this one, as appropriate. A damaged or defective power adapter could be the cause, even if it's the right kind.

  2 simultaneously press the four corners of the trackpad and release. If there is no effect, it is likely to be temporary, and in this case the device must be repaired or replaced.

  3. disconnect or turn off each Bluetooth or USB pointing device, one at a time, testing as you go. You may be able to identify one that is defective. By a pointing device "," I mean a device that moves the cursor, trackpad, mouse, trackball, or tablets. A regular keyboard isn't a pointing device. If you have a desktop without a built-in trackpad design, at least an external pointing device must be active at all times.

  4. If your model has an infrared receiver for use with an Apple Remote, turn off .

  5. This step is applicable if you are using a Mac laptop with a built-in trackpad, and you also use an external mouse or trackpad. Open the accessibility in System Preferences pane, and select mouse and Trackpad in the menu on the left. Check the box marked

  Ignore the built-in trackpad when mouse or a trackpad wireless is present

  Credit for this observation to the members of the CSA PattMK.

  6. reset the system management controller.

  7. If you use a mouse or a trackpad, Bluetooth, investigate potential interference sources, including 3 USB devices.

  8. a swollen in a laptop battery can encroach on the trackpad underneath and cause erratic behavior. If you have trouble clicking the trackpad, it is probably the reason. The battery must be replaced without delay.

  9. a faulty device or a damaged cable can cause the built-in trackpad to a MacBook to behave erratically. If you use the wired devices, disconnect them one at the time and the test.

  10. There is also a report of movement erratic cursor caused by an external display that was plugged in but not turned on.

  11. If you use transfer, disable it in the general pane of system preferences.

  12. If the mirroring of airtime to a TV is turned on, turn it off.

  13. If none of the above apply, or if you have another reason to believe that your computer is remotely controlled, pull it out of the network by turning off Wi - Fi (or your Wi - Fi access point), disconnect a Bluetooth network connection, then unplug the Ethernet cable or a USB modem, whichever is applicable. If the movement of the cursor stops at the same time, you should suspect an intrusion.

  14. an appointment of 'Genius' in an Apple store to do the machine or the tested external trackpad.

• Libretto W100 cursor problems

  Hello

  I have a lot of problems of cursor on a new Libretto W100. Using the field courses on the display it move it in the opposite on the top of the screen. Then I go to the right below, the cursor moves in the direction towards the top left. The only way I found to stop this problem is a full reboot. And then it works OK, but when I close the lid and leave it alone for two hours, for example, come and activate the problem reappears. I especially don't even touch screens to avoid confusion between the machine. But I can reproduce it consistently.

  Very annoying. Any seen elsewhere or have a solution?

  Kind regards
  Wim.

  Hi Winm

  Since when you noticed this behavior? On the first day?

• cursor problem chart xy

  Hello

  I have a weird problem with cursors on XY graph. I can't get the cursor and even when I put manually the value of X in the legend of the cursor, the cursor sometimes go to go to this value of X. And the question is very intermittent. The sliders sometimes operate without any problem and sometimes I can not enter and move them.

  I have attached the vi here that I'm having a problem with. Could someone take a look and let me know if you also have the same problem as me. See if you can move the sliders, snap the cursor on different plots and always able to move the sliders.

  Thank you

  LVCoder

  OK, I found the problem with the bizarre behavior of cursors. It is because of the free third sliders whose value is set by program. Because I set its value equal to the difference first 2 sliders, its value can be a higher value of the negative due to which the sliders do not behave properly.

  To solve the problem I am remove the third cursor and place 2 digital indicators on the front panel to show the delta between 2 sliders

• Keyboard/cursor problems.

  I have an ASUS E - pad Transformer 101. As I type on my keyboard, the cursor continues on to go somewhere else on my screen, so that if I'm not careful, I will be typing in somewhere else. It is very annoying... If someone has had this problem or know why it continues to be now?

  It is a very common problem when users become familiar with a new laptop. Either your palm/wrist/cuff/bracelet is touching the touchpad as you type or the touch pad sensitivity is set too high and reacts to strong strikes.
  • Someone to watch you while you type to see if you are brushing the laptop touchpad inadvertently.
  • Go to the control panel mouse configuration and reduce the sensitivity of the touchpad.
  • Make sure you use the latest version of the driver from the manufacturer of the laptop for the touchpad and update if a new becomes available.
  • Some laptops allow the option to disable the touchpad while typing is performed.
  • Disable the touchpad entirely in favor of a wireless laptop mouse.
  As noted previously, this is a very common problem and users are usually completely unaware they do even when it is pointed out to them.

• Help running SimCity 4 on W7 64 bit pc / cursor problems

  Hi all - I have a brand new custom HP 450 t. Intel CPU quad core i 870 and 2BG GPU Radeon HD 5570. 8 GB of ram.

  I'm a * die hard * SimCity 4 players and you have installed the disk 1 and 2 on my machine without problem. During my 1st game play, the cursor passed its form of arrow normal to a line about an inch long, smooth on one side and rigid, model triangle on the other. All the features of the mouse has stopped at this stage. The cursor is then in a square, about an inch in size with pixels of colors of the Rainbow and still not the possibility to click or select anything. The task manager has been the only way for me to close the game.

  I ran SC4 on our house built 8 years without ever a problem (XPpro) pc. Even for a short time, I start the game on my Vaio laptop, with the only question being incredible RAM consumption resulting in the gameplay being too slow to even bother.

  But I've never seen this kind of problem before. I have not yet tried. After reading online compatilbility issues possible between SC4 and W764bit, I'm not sure how to proceed. Yes, I know Microsoft site advises that SC4 IS compatible. But I really think that if this was the case, so many hundreds of users would not be have reported problems on this forum as well as others.

  Any advice on the question of whether I should even bother, stuff, tips would be greatly appreciated. Thank you very much!!!

  Hi aenflex,.

  Through my research, I found that SimCity 4 is companies; Please correct me if that's wrong.

  Windows 7 says SimCity Societies Compatibility Center is not not compatible and if the game maker

  Windows 7 Compatibility Center

  EA requirements

  Method 1: You can install the update is available for this game and see if that makes a difference

  Update available for SimCity 4, install and check to see if the problem persists

  http://support.EA.com/app/answers/detail/A_ID/223/kW/SIM%20City%204%20system%20requirments

  Method 2: You can follow the steps described in the article below

  Troubleshoot display with Microsoft games

  http://support.Microsoft.com/kb/263039

  (Article apply to Microsoft games, steps for other games)

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 1010 a 320 touchscrreen: cursor problem touch screen model 3201010a HP

  Hello

  I had a touch screen 320 HP 1010-a computer model of office. I hurt me with the departures of cursor.it movement crazy everything in a sudden.it seems that someone starts to control the other place.all open webpage start moving cursor will disappear and the cursor move still crazy. Any suggestions to fix this? Furthermore, I don't know much about computer. Thanks in advance.

  Hi @mechpilot, thanks for your help. I appreciate your help. Anyway, someone here in this forum had the same problem and he has found the solution... I applied the solution and it's been 3 days I have no problem... it's here...

  Go to the MANAGER of DEVICES

  find The DEVICES of HUMAN INTERFACE

  search for HID-compliant touch screen

  Right click and select Disable.

  Thanks for your help.

• Microsoft Windows Vista cursor problem

  I'm having a problem with the cursor in Windows Vista.  If I let the cursor sit in a text box or a spot on a document, I'm typing, the cursor automatically "jumps" to this place.  If I'm not on the screen I have typed several convictions in the wrong place or if I type a user name and password, the cursor will break again in the user name box and my password is registered at the end of my user name.  Is there a setting where I can change this doesn't happen?

  Hello

  Control Panel - mouse - uncheck the default position and watch the other parameters.

  Some programs also have similar controls/assets.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Pointer / cursor problems

  My cursor/pointer works fine except that I get the circle of rotation now constantly.  The system is not "hung" but rather just the "arrow", the circle of rotation is here as well.  Need help.

  Hi WRGasior,

  1. have you made changes on the computer recently?
  2 does the problem occur when you open any perticular programs or all programs?

  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  More information
  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-mouse-easier-to-use

• Windows 7 cursor problem.

  At the start, my cursor looks like and acts normally. But after some use, IE. display Web pages, folders, opening, the size of the cursor is growing! Although in the properties of the mouse - pointer, he says that he is currently using the system windows aero system, it seems as if his appeal to the schema of the extra-large system. And if I change my pointer to this plan, the cursor appears even more great. He returned to its normal size after a reboot, but eventually the problem comes back.

  What graphics card you have? Is the ATI Radeon...?

  You can also read this topic: huge mouse under Windows 7... pointer