Small question wireless - IdeaPad Y730

Similar Questions

• Question of IdeaPad P400

  Hi team,

  Can you get it someone please let me know the process step by step to install Ubuntu in my Ideapad p400 with windows 8, currently running...

  Would be well appreciated. Thank you

  I did not this exact procedure, but there are several guides that have been written. Here are 2 with screenshots.

  http://www.Instructables.com/ID/dual-boot-Ubuntu-and-Windows-8-UEFI/

  http://itsfoss.com/install-Ubuntu-1404-dual-boot-mode-Windows-8-81-UEFI/

  Basically, you need to reduce your current partition, create a new partition, install Ubuntu and then install a boot loader. The procedures above will show you what you need to do. Read through them and if you have any questions, ask away and I'll do my best to explain.

• small question standard dvd menu nav...

  I'm working on a small project right now, it's a concert band. 10 titles, 10 chapters. an hour of time altogether. and I have a 'bonus' of chance from the back stage. now I created a playlist. each song, as well as the bonus feature is his own scenario. I created a playlist for the presentation of the feature, and then I have the pages of chapters, which is where I need help.

  I have 2 pages of Chapter 6 songs on 1, 4 on the other (I didn't like the way it looked with 5 and 5, in comparison to the wallpaper 'background' and such) anywho, I WANT to be able where I click on 1, the song when its done to return to the menu and select the next song, that for each song to the menu. I have this great work. question is, is anyway to set up where she did this if left to play, BUT if you press "next chapter" on the remote control while watching a page of chapter link individual song, it passes to the next logical song? I tried several things, but can't seem to get to do. Still allows for this? DVD allows for this? I thought I had to do...-DVD, but now I don't remember.

  is anyway to set up where it comes from if to play, BUT if you press "next chapter" on the remote control while watching a page of chapter link individual song, it jumps to the next logical song?

  If I click on tell link to 1 song, 1 minute go ' oh, song of evil * skip next chapter * 'it just goes back to the menu.

  As the establishment, no.  I do not know I see it's a big problem: 'Oops, wrong song, next successful chapter, go to the button in the menu for the next song, you play the next song.

  The main alternatives will give place to play all songs once you select one from the menu.

• A small question about iCloud photo storage

  Hello

  I was wondering if once the internal memory of the iPhone is full iCloud will continue store photos? Or the phone must have storage for iCloud to store? I just want to know before you buy an extra 50gig.

  Thank you

  iCloud is NOT a hard drive in the sky.

  iCloud photo library is designed to synchronize photos between your device and your iCloud-storage space. If you choose the OPTIMIZATION setting, the device will have files small size phone while files are in iCloud. This can drastically reduce the needs of storage on your phone.

  The number of photos and videos on your device is always synchronized between your phone and iCloud. Remove deletions from one place to another.

  iCloud "will not continue storing the photos...» "for you.

• Small signal wireless

  I noticed that the wireless signal seems always low on my desk - usually only 2 bars. I see several networks listed belonging to neighbors and none of them show more than 2 bars in the intensity of the signal.

  I have the antenna is plugged in and I think that it is properly connected.

  I regularly use a laptop another l right next to the desktop computer, and I never had any problems to make 4 or 5 bars signal strenght on it. As far I can see my drivers are all to date.

  Anyone got any ideas, what is the problem and what can I do about it?

  Office p6598uk

  Windows 7 (64-bit)

  If the file has the same name as in the following image, then it's the Ralink driver. Make the wireless card. If you aare wary of a driver from the manufacturer site so stick with the HP updates. The choice is yours. The choice of the name of the driver is Railink.

  

• issue wireless IdeaPad z710 windows 7

  Hello. First of all, I would like to say that I love how the products lenovo puts out there.

  Second of all, I am frustrated. I just purchased a Lenovo z710 and dualbooted with Windows 7 Windows 8 is my main OS (ew).

  So I downloaded all the necessary for the Windows 7 operating system drivers and all works... but my wireless.
  I'm running the 64-bit 7 model. I cannot driver wireless for work or 'install' a lot of help would be appreciated!

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3141&DwnldID=23491&ProductFamily=wire...

  try these driver wifi on your windows 7, worked for me win7 home Prem z710

• small question about a mysterious port on my T42

  Hello you lovely people

  Question: what is the round port located next to USB ports, please?

  Problem: I have a 4 port usb 2.0 pcmcia adapter here, but he needs to make a PS/2 port

  It used to work perfectly on my T21

  but I can't seem to find a port PS/2 on my T42, I tried to plug the pcmcia power cable into this round port through the usb ports 2, but apparently not in form, what else can we?

  Anyone know?

  any help appreciated

  x

  It is a S-Video output.

• HP Mini 110 - question wireless WPA2-Enterprise

  Recently bought a HP Mini 110- 3098NR with the Atheros wireless card. It is currently running Windows 7 Starter edition, and whenever I try to connect to our wireless WPA2-Enterprise it does not connect. My HP 6930p connects fine to the same SSID with no problems.

  Anyone else have this problem or have a resolution?

  Found the issue... all parameters were an exact copy of my domain 6930p btu pc is where it was.

  Given that my netbook is not joined to the domain, I need to uncheck "automatically use the logon credentials.

• DeskJet 3510 questions - wireless and Firmware

  CZ044A printer Deskjet 3510.  8 64-bit Windows. Used the downloaded software install Version 28.8.

  Can connect without wireless or USB with no problems.

  1. impossible to install the HP firmware update recommended.  Tried different downloads, etc. but each program runs, the "Problem detected" screen appears and stops the installation.  He tells me to correct the problem, and then try again.  There is no problem I can find.

  2. whenever I restart the computer, the printer without wireless or USB connection is lost.  The icon becomes "gray" devices & Printers.  I tried diagnoses of HP who finds lost communication.  I have remove the device and then reinstall the printer and all is well again until I restart.  This happens with the wireless connection as USB.  In wireless mode, the printer is connected to my router, or if the display shows.

  Thanks for any help you can offer.

  Chuck

  Hi Chuck,

  Make sure the printer connected to your network and try to update the firmware by using the front panel of the printer:

  http://support.HP.com/us-en/document/c03368026

  Shlomi

• Small question about shuffle

  I'm considering the purchase of a Clip +, but have not actually tested one, so I need to ask a question that the people who have already one can answer easily for me.  When you have turned on shuffle, what behavior is the player uses?  He selects a song at random, each new track?  Does make a playlist of your songs in a random order?  If so, is it always the same random order?

  Years, I had a Rio Forge that would be random to your playlist, and once he played once in the list, it would make a new random list for you.  It's basically the behavior I'm looking for.  I prefer to be able to return to the song that played there are 2 songs, but also know what song is coming up next.

  I realize that it is a somewhat trivial question, but it is important for me to find a player who behaves the way I want it.

  Thanks in advance!

  Also; It seems that the player might make a playlist when shuffle is turned on, you can go back and get the songs that played before.  Example 1-9-4, then looking back at 9-1.

  Finally, after playing through the music, the player seems to start over with a new mixed single list.

  

• Many friend... small questions will soon tear my head off!

  Hey guys... well so where to start.

  I've just set up my desktop computer new, not wireless upward at the place that that we just moved. Here's how everything is connected:

  Router cable - Switch (EZXS88W) - (WAP54G) - old girlfriends Mac

  -Ethernet to my computer

  So my computer is on the net very well. Girlfriends Mac, however, would pick up the wireless signal, but the browser wouldn't load ('not connected to internet... »). Being the genius I am, I started to change some settings on the router using the CD with that he came. In the SETUP, I changed the setting to 'Static IP' to "DHCP mode" (not sure if that's true, but you guys probably know what I mean). The reason I did it was because the Mac has said that he was unable to find the IP address, so I thought this might help.

  Clearly, I'm horrible with networks.

  Now the problem is when I try to enter setup on the CD, it says that it cannot find the router.

  Anyone know where I should start to try to solve this problem?

  Thanks for your time in advance!

  An access point is essentially providing a network via a wireless connection. A connection between a computer and an access point is much the same, as if you were using a cable access point ethernet to connect the computer to the same switch that use it.

  Because of this, connect a switch or an access point WAP54G wireless directly to your modem means that all devices will have a direct link with the modem and your ISP. However, most providers allow you to use a single internet connection at a time. In other words, you can have only one device connected to the internet at any time.

  A router allows you to share a single internet connection with multiple LAN devices.

  Setup in your last port will work. That's how you use a router.

• Small questions about Dataguard

  Hello

  I have a few questions about Dataguard. I'm new to DG, carry me so for the display of these fundamental questions:

  We plan to install Oracle 12 c to Win 2012 R2 with primary and physical intelligence on different physical servers. We are looking for HA solution, but cannot afford to license CARS. The two primary & Eve are going to be in the same data center connected via a 1 gigabit network. So I have a few questions related to it.

  (a) since both of our primary & Eve is going to be in the same data center with good connectivity. Can I assume that although Data guard is more DR solution, in our case it would be HA solution since we have no network latency.

  (b) is it safe to assume that where primary fails, then the day before can automatically take the role of primary education without any manual intervention, possibly using Dataguard broker?

  (c) so I understand that where primary breaks down, the existing connections transfer automatically from primary to standby db (most recent primary), but how my web based java application will know that more recent connections must be sent to the standby db Server (more recent primary)? I guess net Oracle has a provision to handle this? Who can be automated?

  (d) given that I have only 2 physical servers, can I deploy broker Dataguard on a normal PC (since it is a thin client) assuming the PC is kept in the data center and is online 24/7?

  (e) I was reading about the modes of Protection, account required to our current situation & infrastructure, I choose 'Maximum availability Mode' instead of 'maximum Performance '.

  (f) what is your point of view about Oracle integrated security? I hear too much on Oracle failsafe, because people generally go to a combination of CARS & dataguard for HA? We have a few additional storage that can be shared between the two servers, but I feel with literally no DG network latency can provide us HA.

  Concerning

  Learner

  (a) since both of our main & secondary is going to be in the same data center with good connectivity. Can I assume that although Data guard is more DR solution, in our case it would be HA solution since we have no network latency.

  Well it will not provide the level of HA that is RAC. RAC is a Transparent Application failover. With a physical standby, you need to apply some delay for a failover operation. You can implement the observer that can automate the failover and reduce the time.

  (b) is it safe to assume that where primary fails, then the day before can automatically take the role of primary education without any manual intervention, possibly using Dataguard broker?

  This isn't really the DG broker, but rather the observer you will need to implement. The DG broker automate failover. It will be the observer who "sees" (where its name) that the principal is down and initiate the failover process. To do this, the observer will use the DG broker, so it will be necessary.

  (c) so I understand that where primary breaks down, the existing connections transfer automatically from primary to standby db (most recent primary), but how my web based java application will know that more recent connections must be sent to the standby db Server (more recent primary)? I guess net Oracle has a provision to handle this? Who can be automated?

  You'll want to read on the QuickStart failover. http://www.Oracle.com/technetwork/articles/smiley-fsfo-084973.html

  (d) given that I have only 2 physical servers, can I deploy broker Dataguard on a normal PC (since it is a thin client) assuming the PC is kept in the data center and is online 24/7?

  The DG broker is required to run on the database server. The DG broker will run on the primary and standby. I think that what you're asking really anything is if the observer can run on a PC. Yes it can. However, it is probably not a good idea. A PC will not have the internal hardware redundancy, a server can have. If the PC can fail more often than to a server. And if the gods are bad, it will fail when you most need.

  (e) I was reading about the modes of Protection, account required to our current scenario & infrastructure, I choose 'Maximum availability Mode' instead of 'maximum Performance '.

  Your choice should depend on the amount of data loss is acceptable.

  (f) what is your point of view about Oracle integrated security? I hear too much on Oracle failsafe, because people generally go to a combination of CARS & dataguard for HA? We have a few additional storage that can be shared between the two servers, but I feel with literally no DG network latency can provide us HA.

  Oracle integrated security only works on Windows with a MS Failover Cluster. Real DBAs do not have Oracle on MSFC.

  See you soon,.
  Brian

• small question data mart tools

  Sorry I'm pretty new to olap data!

  We have a small operating system that creates about 120K records a year in a single table with a couple of two level lookup tables. the component "hour" is stored with the measure that is already assembled to the desired granularity 'day '.

  CategoryLevel1-> CategoryLevel2-> measurement with date <-LocationLevel1 <-LocationLevel2

  We want to target a design BI "light" using Pentaho, Mondrian and Saiku against an Oracle database. If we need another schema then its ok to have the same database.

  We are simply considering using materialized views in the form of tables of facts and dimension for ETL as described here:

  http://WW1.ucmss.com/books/LFS/CSREA2006/IKE4645.PDF

  is this a common approach? are there disadvantages that are of importance to our effort?

  appreciate any idea that you can provide.

  I don't know if this will help, but there is a nice white paper on how the database Oracle OLAP option can be used to http://www.oracle.com/technetwork/database/options/olap/oracle-olap-11gr2-twp-132055.pdf.

  There are other benefits of OLAP to Oracle OLAP.

  -Ken Chin

• Working with Illustrator and Photoshop-small question

  Hello, I am working on a 16. "x 21.5" printed for a class as a final note.  I think I already know the answer to that, but I really need to be sure.  I mainly work in Adobe Illustrator, trying to get a look simple but complex vector for my room and lets just say he quickly became real complex.  I am currently working on 1 impression of 2 and I do traces of image of a batch of raster images I did for this project.  It's all in color, so there are probably thousands of separate objects now, so of course Illustrator starts to slow down a little (lag a bit on mine and almost always a stand on any computer in the school).  I have just a few details to work out, so I can deal with the LAG, but I fear that if the printing process can take some time (there are other students who need to print of course).  I thought to put all my objects and layers in Photoshop and flatten the image to we hope to facilitate things on printers.  So here's my question: do I put the image in Photoshop and flatten out it, the draw would still have this nice clean edge of a vector image?  This is probably a stupid question, I know, normally, I would ask the teacher however it is not the best with computers.  It's my last, I just need to be 100% sure.  If this wont work, I need to find a way to make smoother Illustrator with my detailed image.  Thanks for the help.

  If you bring your Illustrator art into Photoshop and flatten it, your art is now not vectorized pixels. So technically Yes, you'll lose some of the edge of pleasant eigenvector. BUT, given your situation, the fact that this printing to a printer from school, your solution is good. The quality loss will be imperceptible to most and will certainly save you headaches of printing possible. Follow these steps.

  (1) create a new Photoshop document to the same size print as your Illustrator document.

  (2) set the resolution to 300 dpi (this will be more than a resolution high enough to maintain the appearance of cutting edge of vector)

  (3) make sure that the (RGB or CMYK) color space is the same as you have used for Illustrator. Make sure that the icc profile is the same too.

  (4) place the Illustrator art in the Photoshop document.

  (5) save the file in TIFF, without diapers

• Small Question about Advanced Configuration settings

  When you change an advanced value of a VM, why the new object is created

  New-Object VMware.Vim.VirtualMachineConfigSpec

  When we look at the object of $vm.extensiondata.config this object looks like for me VMware.Vim.VirtualMachineConfigInfo no "context".

  So my question... to rephrase and perhaps provide some clarification... Why is context and not ConfigInfo?

  Objects of the type of information are present when you retrieve a vSphere object, objects of type Spec are used when you configure a vSphere object.

  It's the Get-ter and Set-ter from the point of view PowerCLI cmdlets.