Small signal wireless

Similar Questions

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WRT54G good signal wireless but no internet connectivity.

  I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.

  Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.

  I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.

  I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.

  I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.

  Is it possible to have two bad routers that the internet can pass through but the router cannot detect?

  At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.

  Any help that anyone can give is most appreciated.

  Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.

• loss of signal wireless/network after reinstalling the system

  I have a Pavilion g7-1070us laptop who couldn't start. I reinstalled the OS Win7 by downloading the ISO file and activated by the method of the phone.

  The problem is that even after you install the network driver concerned Intel (sp57090.exe) on the site of HP driver support, I even canoe see a connection or a wireless signal.

  A caveat is that, once I installed this driver from nextworking, a message pops up saying "this program cannot been installed properly" and gives you two options: 1) reinstall using recommended settings. (2) keep as is (this program has been installed properly). I chose option 1 and reinstall it was fairly smooth and no other error arises.

  When I tried to troubleshoot and set up a new connection to the internet, the following error message appeared:

  "Windows doesn't detect any hardware networking". I ran diagnostics disk before so he spent without any problem. It's very confusing.

  Thanks for any help!

  You are the very welcome.

  Here is the link for the driver you need for the Broadcom wireless card in your notebook.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1 & CC = US & DLC = in & LC =

• Re: A350 Terrible Signal wireless

  Hey,.

  Wireless of my Satellite A350 features are not at the height. If the wireless signal is not effective, I can't connect to a network at all.
  If I move away from the router where other computers laptops (MacBook, older Toshiba) always have full force pointed out, my A350 cannot even pick up the signal.

  Is there any setting I should change to enable my wireless connection to use more distance from the router?

  Any help would be greatly appreciated.

  See you soon.

  You can check the wifi drivers:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

• Signal wireless through walls

  I have a House with lath and plaster walls. I don't know if an outdoor wireless camera passes the signal through the fence that is embedded in the walls. Please comment. Thank you.

  My House is stucco outside. I have two cameras wireless running outside. One in front, one in back. No problem to use.

  My devices are Vivotek outdoor type that works very well in the hot summer days or dead cold winter days (temp. as low as-30 ° c). A tried

  cheaper cameras and they worked well.

• NB200 w/Atheros AR9285 - extremely low signal wireless

  I have bo9ught a laptop computer mini nb200 with Windows XP SP3 a year ago and I've always had a very weak signal (1 bar) wireless, but I blamed the router, I had. But recently I changed my router (EDIMAX BR-6204Wg) and a friend brought another laptop at home and the diference between the signal we had was amazing. while I was trying to conect to my router, it might even catch a signal public wireless to a park four blocks from here.
  I'm grateful for the help.

  PS: Sorry for my English.

  Hello

  How about WLan driver update?
  Here's the latest drivers:
  http://APS2.toshiba-tro.de/WLAN/

  How about deactivation for the WLan to save energy?
  You can do it in the operating system power management and the properties of card Wlan (-Wlan card-> properties > Device Manager)

• Bumping signal wireless intel 2200bg

  I have,

  After sending my laptop warranty and changed my lcd and updated my bios.
  now at home with my dlink wireless router/modem I can not connect wireless if I'm not right next to it and even if the bumps from 2% to 100% wireless signal!

  before that, I had no problem! and all my other laptop works very well on my Wlan...

  so I guess that the guarantee all messed my system!

  Can you please go back to your previous topic and read the last post? Why we can not continue discussion here?

• Sample clock dependence with small signals data acquisition

  Hi all

  I use a NOR-9205 on a NOR-cDAQ-9184 and noticing some interesting dependencies of waveform on my sampling rate selected. It seems that small changes in the sample clock frequency have a significant impact on the measured waveform.

  Quick background, I am in a position a signal with a ripple of mV ~ 10 with V 1.6 bias. I'm not interested in DC, only the AC signal but the NOR-9205 has only DC coupling. The application is a circuit where I expect simulations noise past the circuit must be greater than the higher noise frequencies. In the waveforms attached the background plot is the applied signal, and the top graph is the signal arising after that the signal was mostly annihilated. The two waveforms are measured with the NOR-9205.

  I am aware that this measure is less than the precision of the NOR-9205, which has a maximum precision of ~ 3 mV in his +/-5V range. However, if I can't at least on the basis of shape which is good enough for me. I'm also now pretty curious that data acquisition is actually to create this

  My best idea, is that it is a product of internal multiplexing of the 9205 with the DAC.

  The first plot shows the waveform at 20 000 Hz, which is what I expected:

  

  The second shows the waveform at 20 001 Hz, which seems to be modulated with a backup sawtooth:

  

  The waveform looks as expected for 20 000, 20003, 20004, 20005, 20008, 20009, 20010 and Hz 20011. The waveform looks like modulated to 20001, 20002, 20006 and Hz 20007.

  Ideally, I would like to understand this problem so that I can configure the measure in a stable way that I can count on the basic shape of the wave. Has anyone seen something similar?

  
  

• Small question wireless - IdeaPad Y730

  Hello. I just recently received my Lenovo Y730, Vista Home Premium x 64, in the past few days and it works perfectly, alternative for a small hiccup. It is more than an inconvenience, but I am wondering how to fix, or what goes wrong in general.

  I have connected to my router wireless very well, but get shut down or restart? When it comes on the next time it seems have unchecked the "automatically connect" box and turn on automatically when I connect. I have re-checked several times and each time it automatically reconnect.

  Any ideas on the problem? Or a solution? I'll try things with the router itself, but it doesn't seem like it's the problem for me. Can be so bad.

  Your computer comes with installed ReadyComm? If so, try to uninstall it and use Vista built in Wireless Manager.

• HP Laserjet M201DW: Can not completely Turn off HP Laserjet M201DW signal wireless

  I have two questions:

  1. more printer is interfering with my keyboard and wireless mouse

  2. the printer appears on my streaming (SSID) devices

  I turned off the wireless keyboard of the menu signal, but as I understand it, there could be a second signal or something.

  How do I completely stop the wireless signal?

  From the front panel.

• Signal wireless Intel Centrino Advanced N 6300 turns is not on

  Hi, I recently bought a new WiFi adapter for my laptop, which ended up being the Intel Centrino Ultimate N 6300. I uninstalled my current Qualcomm Atheros AR5B125 it is out of my laptop and jumped into the new Intel card. I have attached the antennas and pulled up my laptop. I copied the drivers via a USB on my laptop and install without problem. But then the WiFi signal would not turn on. I restarted my laptop nothing doesn't. By pressing the switch WiFi on my laptop does not respond and Windows flashing wireless option is grayed out in Mobility Center. When you run manual tool from Intel it's equipment and pilot tests successfully, but radio test fails. Does anyone know if I can fix it, or did I just waste my money? Also, the laptop is a HP Pavilion G6.

  Well it is not compatible, but thanks for the help anyway banhien.

• How to restore (the intensity of the signal) wireless network status icon to the toolbar

  I inadvertently deleted the icon status of wireless network (signal strength) (the signal strength of the bars as ATT) of my toolbar. I would like to add back. I checked the internet and found the answer. Instructions on how to do would be greatly appreciated.

  An update the program brought back wireless icon.

  PROBLEM SOLVED

• Signal wireless connection impossible to find XP, Vista, Windows 7

  Hello MS supports,

  I do turn a cyber-café and also provide wifi in this installation using cisco aironet 1400 series AP. The problem is with my side wifi. 4 out of 10 customer are not able to find any signal broadcasting. I kept it without warranty and without SSID... So anyone can come in and use and I use a token S/W generator which takes care of the timing, but intrestingly those who do not find the signal in my coffee are able to find other signals very well. The systems include xp vista and some win 7 too. u can suggest why it is happening a bit frustrating and hit my business here. It may not be the PA, the rest being able to find the signal. WHT is goin

  Concerning

  Alan aka NEEQ-Tech

  Rocks of the Exchange

  Hello

  A lot of wireless computers cannot connect if there is no SSID.

  If you want to provide your solid service to broadcast the SSID.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Bad signal wireless Dell Inspiron 1564 laptop 1397 WLAN Mini card

  I tried just about everything to improve wireless signal deteriorating strongly that the PC is moved a few feet of Belkin router.   Other members of the community of Dell have reported that switching from the driver provided to pilot Microsoft 'default' significantly improved things and suggested: Microsoft, driver Date: 01/10/2008, driver Version: 4.176.75.21 can someone tell me where this driver can be downloaded or offer alternative remedies?

  1 I solved the problem by uninstalling the Dell Wireless WLAN Card Utility then [Control Panel, system, Device Manager] removal from the Board & let Windows redetect and re - install [using its default driver].  Problem solved - I now receive wireless signals well.

  2 I also spent a step further, but then had to travel to what I wrote at paragraph 1 above.

  2.1 I tried updating the driver with Dell to update the facilities but [even though the version number of the driver was the same] the problem of weak reception back.  I repeated the solution in my para 1 and it was beautiful once again.

  2.2 I have updated the driver using Windows Update, but once more [although the version number of the driver was the same] the problem of weak reception back.  I repeated the solution in my para 1 and it was beautiful once again.

  Both Windows & Dell drivers come from Broadcom at some point as they made this card.

  I also tried to contact the Dell technical support six times during my warranty period, but never got a reply.

  This solution I have from what I'd learned from the user of the Jack MVPforum.