Smartphones blackBerry after every incoming and outgoing phone/email/SMS messages are deleted.

Similar Questions

• Smartphones blackBerry after update something happened to my ' no ext message

  My bb 9700, update himself. After the update, I noticed that something is wrong with my emails. When reading emails, I was pressing "n" to go to the next message. but now when I press on ' no it goes only a message forward, then after pressing on ' not yet once again, it goes back to the previous. If its circles between 2 messages, what happened? How to fix? because I read a lot of emails, is very important for me... I need a hand to solve this problem. Please guide

  Hello

  I think you can try two things: the soft reboot, and if it does not, the hard reboot. Don't worry, you can not lose data with these two reboots.

  Soft reboot:
  1) struck the following three keys at the same time:
  -Alt
  -Right shift
  -Remove
  (2) wait 2 minutes for the Blackberry to wake up.

  Hard reboot:
  (1) your BlackBerry smart phone is on
  (2) remove the battery and wait a minute
  (3) replace the battery
  (4) wait 5 minutes for the device to wake up.

  Please tell us if it works for you.

• block incoming and outgoing calls for some phones

  Dear all

  I have some phones like the kitchen, to block incoming and outgoing calls to the phones of these kitchen and I want these phones to call only internally. I have E1 gateway H323. How the configuration it will be CSS and Partition?

  Thanks and greetings

  Ideally, you need to two CSSs for this - a CSS gateway and a device of CSS. Type the extension of the kitchen a new partition. Add this new partition to the CSS but not the CSS bridge. In this way the incoming calls are blocked.

  For outgoing calls, you will need to another partition and CSS. The partition must contain the model 9. ! (or whatever your outdoor access code) and should block it. It may be the translation or boss of the road according to the design of your CUCM numbering plan. This model will be assigned to a new CSS called Block_All (or something), and this must be attributed to the level of the line.

• FOLLOWED THE INSTRUCTIONS INCOMING AND OUTGOING STILL NOT ABLE TO SEND AN EMAIL.

  QUESTION BY E-MAIL:

  FOLLOW-UP iMAC SETTINGS for ROGERS.

  THE SETTINGS OF MAIL SERVER INCOMING AND OUTGOING SERVER AS WELL. ALWAYS IMPOSSIBLE to SEND the incoming SERVER icloud MAIL READS. PO4, map.mail.me.com and outgoing readings ROGERS (OFFLINE)

  ISTHERE A WAY TO CHANGE THE SETTINGS? THANKS ELLIE

  OS X Yosemite 10.10.5

  Serial number. D2 * 8J7

  It is difficult to read.  Please use the top & bottom case.

  Please provide a link to the instructions.

  Please provide image on the screen to how you have configured these settings.

  -------------------------------

  How to show an image on the screen.  Avoid personal identification.

  on Mac, you do:

  Command + shift + 3 will have the entire screen.  You hear a click.

  Command-shift-4 lets you decide what to take.  Changes of mouse pointer. Move the mouse to the upper left corner of the image of desire.  Press and hold the left key of the mouse to start the image.  Drag the mouse to lower left where you want to stop the image.  Mouse release.

  You will get a .png file to the desktop image.

  On the entrance sign of the forum, you will see the camera icon.

  

  Click on the camera icon.

  another window will appear.

  Make sure you have selected the in your the computer tab.

  Click the Browse button

  A Panel to open the file.  Select the file.

  After selecting a file, I have this screen showing.

  

  You need to click Insert Image.  You may need to scroll down to see the button to insert an Image.

  R

• How to change my password and my incoming and outgoing mail servers

  Hello, I used Outlook Express for years and I know how to set up 'everything' I need in the pages of parameters because their settings pages are all "logical" with everything out in the open.

  However, Thunderbird "cache" their settings behind the buttons and confusing forms.

  There are many tutorials that explain how to set up Thunderbird since the beginning and show how to set up a new e-mail account. But I was not able to find a tutorial on how to change my password "after that" I have been using Thunderbird for a while.

  I'm also no way to change the incoming and outgoing servers. For example, I changed my hosting at another Web host and I need to use the new the new hosting company e-mail servers and I can not anywhere, see any tutorials that cover current activities or day by day with Thunderbird.

  Can you please change your screens of settings for Thunderbird easier for new people to find these normal and necessary?

  Also can you please point me to a tutorial that shows me how to change my password and change my incoming and outgoing servers?

  Thank you very much!

  Edward

  You can change your settings to

  • Thunderbird > tools > accounts settings
  • After clicking the account settings > you get a pop up window
    • Left hand side you can see the list of emails that you configured
    • Same left panel last option is the outgoing server settings

  Thunderbird is the customer between the user and the mail server. She never recorded your personal membership. If you want to change your password, go to your mail server and change it via browser

• Incoming and outgoing servers

  I try to send an email to apply for a job with my resume and were invited to fill out my incoming and outgoing servers who should I go to find this information responds (in lay mans terms please)

  [Moved from comments]

  You should contact your provider of messaging service for this information.  It is an electronic forum and communications in Windows, but it cannot dictate your information you need, as that depends on your provider.  If you go through Hotmail, then ask in the forum of Hotmail here: http://answers.microsoft.com/en-us/windowslive/forum/hotmail if not, see your email provider's website.  They usually have this information on it.  You will also need to specify which version of Windows you are using and how you access your emails in this version.  Without more information, it is unlikely that you will get more specific help.

  Steve

• Outlook express 6 rebounds all incoming and outgoing messages on Wndows xp.

  I posted this question earlier, but apparently to the wrong forum.  I deleted all the messages in my nbox, sent items, deleted projects... All incoming and outgoing messages are bounced back indicating that the bytes are at their limit.  I don't know if the messages are stored on my server or not.  Don't know how to check.

  Is there a solution for this?

  In addition to the other suggestions, try to go to the file. Identities and setup a new identity.  Add your e-mail account to this identity and see if it will download messages and delete what is on the server.  The files can be corrupted in the old identity and may not delete messages from the server.  You can also contact your provider and e-mail them to check on errors.

  Steve

• What is the incoming and outgoing POP3 for AOL?

  What is the incoming and outgoing POP3 for aol?

  Hello

  the servers are:

  for POP3 - pop.aol.com

  for SMTP - smtp.aol.com

  But you need to change the port number in 587 for SMTP .

  You can see here - how to configure Outlook 2002 and Outlook 2003 for SMTP and POP3: click here

  (the last photo is important - you need to check - this server requires an encrypted connection SSL - SMTP and POP3 too)

  LC

• I need help to find my incoming and outgoing server address are

  I am trying to set up my email and asked what my incoming and outgoing servers are how will I know

  E-mail account:

   

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• Need to set up Windows mail for incoming and outgoing mail server

  I am trying to set up my mail in windows for the first time, can someone please help me with the details of the incoming and outgoing server (pop)

  I am trying to set up my mail in windows for the first time, can someone please help me with the details of the incoming and outgoing server (pop)

  Hey Kim Clement

  Contact your ISP (internet service provider).

  They offer your broad band/dial-up connection.

  Ask them to:

  username
  password for your access broadband account / distance with them
  Server of incoming POP3 mail
  outgoing e-mail server

  and read this on how to set up windows mail on the microsoft below link

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Walter, the time zone traveller

• Windows7 when I migrated to the Working Group at the field of the firewall has crashed. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.

  In my windows7 when I migrated to the task force to the area, crashed by the firewall. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.

  Hello arjunpottekkad,

  It is disheartening to know that have problems you with the firewall. As I understand it the incoming and outgoing traffic rules are missing from the firewall.

  The question you posted would be better suited in the TechNet Forums . I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you are having problems with the Windows Firewall or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Please incoming and outgoing Setup mobile mail server config

  MAILBOX: incoming and outgoing ORACLE server, the value of the E-mail port please

  MOHAMED ABDENOUR AMRANI SAHIB says:
  I am not able to access the forum Archives fruit. LOCKED FILE. Help, please

  I don't understand.

• I checked automatically do this and now my email pdf files are automatically save. How to reset it

  I checked automatically do this and now my email pdf files are automatically save. How to reset it

  Hello

  You can change this setting in:

  • Tools (or

    

    ) > Options > Applications

  • Look for 'Portable Document Format (PDF)' and modify however you want the file to process.

• BlackBerry Smartphones Blackberry to take apart and put back together.

  No, I don't mean remove the physical device.

  My company (finally) made me a Blackberry (Bold 9650) so I could learn to do things like it backup, restore and so immediately and (better) to provide technical support for others.

  So, I would like to know:

  1. how to back up my Blackberry?

  I have e-mails, contacts and appointments calendar and your Internet favorites.

  Would I need (as I believe...) to connect the device to a computer via a USB cable and somehow save these items on the computer?

  Is it a synchronization for this software?

  2 restoration

  I guess I want to reverse the process above.

  3 secure wipe

  Some time ago, in another section, I was told that it would probably be necessary, if a Blackberry into a movement of one BES/BPS server to another, to wipe the device and then turn it back on.

  Wipe the unit would, I guess, delete the personal data, hence the master back to the top and restore operations.

  What a wipe erases exactly (and what don't we not delete)?

  4. What is (re) activation after a wipe?

  Wiping the Blackberry does include eliminating the activation information (I guess for that), it seems that I have to reactivate with my ISP (Verizon, in my case), correct?

  Now, I won't do this 3 times a week, every week, but can I reactivate my Blackberry as I want? I just call Verizon like I did at the beginning?

  Hello

  Yes, the subject line is a little off the mark! I'm afraid that some people may not even venture into your thread accordingly. However...

  mwerner wrote:

  1. how to back up my Blackberry?

  2 restoration

  • KB23680 How to back up and restore data from smartphone BlackBerry using BlackBerry Desktop Software6.0
  • http://us.BlackBerry.com/apps-software/desktop/
  • KB12268 Supported by BlackBerry Desktop Software for synchronization applications
  • KB17022 How to set up BlackBerry Desktop Manager synchronization settings

  mwerner wrote:

  3 secure wipe

  Some time ago, in another section, I was told that it would probably be necessary, if a Blackberry into a movement of one BES/BPS server to another, to wipe the device and then turn it back on.

  Wipe the unit would, I guess, delete the personal data, hence the master back to the top and restore operations.

  What a wipe erases exactly (and what don't we not delete)?

  Hmmm... I'm not sure on the migration of one BES to the other, but I know that a WIPE has no effect on the it policy. I don't know if the migration to an another BES replaces the policy of IT or not. Nevertheless:

  • KB14058 How to delete all data and applications from BlackBerry smartphone using wipe Handheld
  • KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data
  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/remove-it-policy-from-personal-PHO...

  mwerner wrote:

  4. What is (re) activation after a wipe?

  Wiping the Blackberry does include eliminating the activation information (I guess for that), it seems that I have to reactivate with my ISP (Verizon, in my case), correct?

  Now, I won't do this 3 times a week, every week, but can I reactivate my Blackberry as I want? I just call Verizon like I did at the beginning?

  Reactivation as with the carrier. For the Association, is a lack of prejudice no-fault to reactivate with them. Simply dial * 228 and select Option 1 (then again and select Option 2). You don't really have to call and talk to them because your BB is fully registered on their network the first time you activate... on CDMA networks, there is much more "hardcoded" into the network (where the greatest difficulty taking CDMA devices and use them on another CDMA network).

  I hope this helps!

• Sync of Smartphones blackBerry with vista calendar and address book

  Hi, I am new to the Blackberry curve 8310 and Windows Vista.  I can't get my info from my Blackberry to engage contacts and the timing of Vista because it is not recognized by Blackberry.  Any suggestions are appreciated!

  Hello. I am afraid that I did not understand all options regarding the synchronization of my 8310 with Vista calendar still; However, I had success sync my Blackberry with Contacts in Windows Vista, the other day.  After you load the Blackberry Desktop Software, go and click on synchronize, and then click the Configuration tab.  On this tab, click on the button "configure Synch... ».  This brings you to a screen that allows you to choose which office program you want to use to synchronize your info.  Select address book and then click on the "Settings" button... ».  Select Microsoft Outlook Express and click on "next >".  Select what kind of synchronization that you want to perform (if you want a clock 2 channels or just for the synchronization from your phone to the computer or the computer to the phone) and click on "next >", and then finish.  Go out and return to the Configuration tab, click the Sync tab and tap sync now.  Even if you have selected Microsoft Outlook Express for synchronization, to synchronize automatically with Windows Contacts for Vista.  (Or at least mine did).  I hope this helps!