Similar Questions

• PEN TOOL doesn't WORK ANY MORE after PS 2014.2 updated!

  I just downloaded the latest update to Photoshop.  Pretty slick... adjustable fonts in the drop-down menus again... nice guide improvements.  A small problem... THE PEN TOOL NO LONGER WORKS.  The program is completely useless.  What the h % + l is the problem with adobe?  At least I can still use Photoshop CC.  Anyone got a solution for this?

  Jim

  Problem solved.  Ventilation helped.  The culprit was in the "transfer" of brush settings.  My airbrush now works with the rims pen option where it didn't with the previous version of 2014.  In fact, it works so well now that it applies the last setting of wheel stylus used to my other Wacom pen tools.  (That didn't happen in CC) I have to be careful to let airbrush stylus wheel when 100% setting after use each time before returning to the normal Wacom pen.  But at least it's working now!

• How can I reset optimize for quick removal on USB that I don't see any more?

  I installed a Drobo on my Vista 64 SP1 and became only on transer 12 MB/s on USB 2.0 speeds.  I went into policies and changed the setting on the drive to optimize Performance.  Come find out who is a no no with a Drobo.  Is no longer, I can start or stop the computer with the Drobo connected via USB.  If I connect it runs that the drive is not recognized in Device Manager or any where.  The only change before and after, it's changing the Optimize setting.  Yes, is there a reg edit I can do to get the back of the car, or all USB drives, to optimize for a quick deletion since I can't access the drive at all now?  Any other ideas?

  Also, I tried to do a system restore, but for some reason any Vista shows only a restore point of yesterday and today.  He has no points for any time before that.

  Thank you

  Ted

  Oops... Press the wrong button

  (1) go into your registry with regedit... the registry entry for your drobo will remain even when you are offline.

  Navigate to HKEY_LOCAL_MACHINE\SYSTEM

  now searching: UserRemovalPolicy

  make sure that 'look' VALUES is verified

  keep hitting "Next" until it looks like you're in the tree of your drobo (have not installed on this PC so I can't find the exact key for you)

  The value is probably '2 '... Change it to 3 (no matter if hexadecimal or decimal).

  reset.

  connect drobo when you get back into windows.

  .. Lister other possibilities:

  (2) would work... connect a USB 1 or 1.1 hub to PC and connect drobo to hub...

  (3) go in the BIOS of the PC and USB set 1 or 1.1... might work... maybe not...

  ~ kev

• HP Deskjet 845c stopped printing in the middle of a job and don't print any more

  My deskjet 845c was printing fine and then suddenly stopped printing in the middle of a page. The power light is on and steady, and the orange light blinks.  I can't print at all at the moment.

  I followed the troubleshooting listed using the HP diagnostic Print and have removed and cleaned the ink cartridges, but the orange light still flashes.

  Any help you could offer would be greatly appreciated.

  Thank you.

  It seems that one of your cartridges has failed.  I don't remember if the printer Deskjet 845c is printed in reserve with a deleted cartrdige mode.  If you then remove the cartrdige color and try to print a test page.  If this works the cartrdige of color was at fault.  Otherwise then reinsert the cartrdige color and remove the black cartrdige and print a test page.  It worked?  If so, the black cartrdige is at fault.

  If the printer will not print with a cartrdige deleted then I would replace the black cartridge with a replacement fee.  My experience suggests that the black cartrdige is usually the culprit...

• The argument of presence does work for me in any more

  Simple button that, when clicked will display a rectangle (revealing a button). Will not work. I HAV tried everything that worked in other forms, etc for me. Script is the following:

  
  topmostSubform.Page1.declineBox.presence = "invisible";

  Does nothing. I tried visible, hidden - nothing works. Form is dynamic previews so it isn't that. Other forms which have the same script work. I copy those in my form and that they cease to operate.

  Thoughts?

  You said that you have set the preview of the dynamic document but have you double checked that you have saved the PDF under Dynamics?

• After the upgrade of the APEX 4.2.0.6, I don't see any change

  Hello

  I have a production APEX running version 3.1. I downloaded APEX 4.2.0.6 and installed. I didn't remove the previous APEX users because I fear that it would change anything prevents existing applications runs properly.

  When I connect to APEX http://xxxxxxx:7780/pls/apex / ,, I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?

  I can see there are users in the previous version. But I've not deleted the. What prevents the Apex 4.2 runnig?

  SQL > SELECT username

  2 FROM dba_users

  3. WHERE (username AS USER OR name "FLOWS_ %" LIKE '% APEX_')

  4 AND USERNAME NOT IN)

  5. SELECT "FLOWS_FILES".

  6 DOUBLE

  7 UNION

  8. SELECT 'APEX_PUBLIC_USER' FROM DUAL

  9 UNION

  10 SELECT SCHEMA s

  11 FROM dba_registry

  12 WHERE id_comp = 'APEX');

  USERNAME

  ------------------------------

  APEX_030200

  I used this document to install APEX http://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#HTMIG839

  Thank you for your help.

  Christian

  Hi Christian,

  chipniz wrote:

  Hello Kiran

  I redid all installation steps and found that I now have this error:

  Service temporarily unavailable

  The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.

  When are you facing this error?

  • Access to the APEX Oracle Application Builder (http://someserver:7780/pls/apex)
  • Accessing an application in Oracle APEX (directly through URL viz. http://someserver:7780 / pls/apex/f? p = 123:101)

  What kind of error is it?

  • HTTP error with an error like 404 code
  • Error on Web server with detailed description of the error (if so, check the newspapers of OSH for more information)

  What is the type of the OHS?

  • Oracle Application Server 10g
  • Oracle HTTP Server distributed with Oracle Database 11g

  Finally it is part of your question:

  When I connect to APEX http://xxxxxxx:7780/pls/apex / , I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?

  What did you mean by that?

  • You receive the login for the old version screen
  • You receive a blank page

  I would like to you check the following things:

  • Check that the APEX_PUBLIC_USER account is unlocked. Please see section 3.5.5.2.1 on expiry of password in the Oracle 11 g database in https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJHJAG
  • Check if you have copied the images properly after the upgrade. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJDGFJ
  • Check that you have the correct configuration for images settings, the database connection string, user name and password database. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#CHDHCBGI

  I hope this helps!

  Kind regards

  Kiran

• After downloading Visual Studio 2013 month or two before, I don't get any auto matic updated no more.

  Original title: no update

  I noticed that after I downloaded Visual Studio 2013 month or two before, I don't get any auto matic updated more?

  Why?

  I use:
  * Windows 7 Ultimate
  * eMachine
  * Pentium (R) dual-Core processor T4400 2.20 GHz
  * 32-bit
  * Microsoft Windows
  Version 6.1 (Build 760: Service Pack 1)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• CalendarAgent close unexpectedly and more after the upgrade to 10.11.5

  After the upgrade to 10.11.5, I get popup after popup stating "CalendarAgent quit unexpectedly" (forgive the change of fonts copy paste)

  He's going to stay here until I have click and then within 10 seconds, it will return. After reboot, after forcing reboots, nothing I've tried so far solves the problem.

  Anyone else having this problem?

  joelb

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Engravers Blu - ray Samsung SE - 506 Monte is more after the upgrade of the El Capitan

  Hi all

  MBP, in early 2008, El Capitan 10.11.2...

  My Samsung Portable Blu - ray writer, SE-506CB/RSBD Monte is more after I upgraded to El Capitan, last week.  The drive itself is only a few months old.

  The problem is not the USB ports, like other devices work fine with all the USB ports on my MBP.

  Note that I'm NOT trying to read or write a Blu - ray disc.  I try only to play audio CDs, I've done successfully before the upgrade to El Capitan.

  Someone had this problem?

  Thank you...

  For what it's worth, I have this problem as well.  The drive tray would not eject even with a single cable, so I switched to another.  I could then open the drawer (seems odd for me) but the disc would not rise.  Here's the info from the console log that indicates that the operating system is getting bad feedback from the pilot saying that the disk is defective.  This same drive/cable/disc work very well on my MacBook Air 10.10.5 and had worked perfectly well with this MBP even before the service (and "free" upgrade to EC by Apple).

  Console

  09/01/16 12:34:49.000 kernel [0]: AppleUSB20HubPort@fa130000 011849.735343: AppleUSBHostPort::resetGated: a new attempt to list 100 MS

  09/01/16 12:34:50.000 kernel [0]: AppleUSB20HubPort@fa130000 011850.924723: AppleUSBHostPort::resetGated: a new attempt to enumeration in 200ms

  09/01/16 12:34:51.000 kernel [0]: AppleUSB20HubPort@fa130000 011852.236095: AppleUSBHostPort::resetGated: a new attempt to enumeration in 400 ms

  09/01/16 12:34:52.000 kernel [0]: USBMSC (non-unique) identifier: (Korean characters removed) 0xe8d 1956 0 x 0 x 0, 2

  09/01/16 12:35:10.000 kernel [0]: disk3: alignment error.

  09/01/16 mds 12:35:12.432 [74]: (Volume.Normal:2464) volume: 0x7ffc330a4c00 * initiated creation of occluding a default location: 1 SpotLoc: (null) SpotVerLoc: (null): 0/Volumes/ENTOURAGE

  09/01/16 mds 12:35:12.456 [74]: vsd:0x7ffc33173400 (Volume.Error:577) open failed.  failureCount:0 (null)

  09/01/16 12:35:23.000 kernel [0]: smb_smb_ssnsetup: GROUND does not support extended security, this server will be deprecated in the future!

  09/01/16 mds 12:35:27.471 [74]: context of recycling: 0 (Volume.Normal:166) vsd:0x7ffc33173400 DisabledStore: {}

  DisabledRecycleCount = 1;

  }

  09/01/16 mds 12:35:27.502 [74]: vsd:0x7ffc338c6000 (Volume.Error:577) open failed.  {failureCount:1}

  DisabledRecycleCount = 1;

  }

  09/01/16 mds 12:35:57.502 [74]: (Volume.Normal:166) vsd:0x7ffc338c6000 DisabledStore recycling: 2 context: {}

  DisabledRecycleCount = 2;

  }

  09/01/16 mds 12:35:57.540 [74]: vsd:0x7ffc308c8400 (Volume.Error:577) open failed.  {failureCount:2}

  DisabledRecycleCount = 2;

  }

  The drive works perfectly well with this disc in 10.10.

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• Performance issues because I don't have any volume in my system after you have removed the infected files

  I have a few files that were infected so I deleted them. Now, I don't have any what volume in my system please help or direct me to a program that I have to reinstall thanks in advance!

  You will need to tell us more about your system and exactly what "I have no volume on my system" means.

  Unfortunately, the implementation of MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Not knowing the basic informations of a problem prolongs the frustration and the agony of these issues, but that's the way they choose to turn things around here.

  Thank you owners MS Answers, continue to make solving simple problems as frustrating and a lot of time as possible.

  Please answer the following questions, the better you can:

  What is your system brand and model?

  If you have a Dell computer, what is the Service tag?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, avast! Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If you get an error message, what he said (exactly)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  Do you mean that your system does not any sound at all or do you mean that no longer see the volume control icon in the Notification area (to the left of the clock in the taskbar system)?

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  If you look in Control Panel under sounds and Audio devices and uncheck/check the volume icon to Place in the taskbar and click on apply, you see a message like this:

  

  What do you see iif you click on start, run and in the type box:

  c:\windows\system32\sndvol32.exe

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• Since Windows 8 my taskbar don't auto hide more, even after you have changed the settings.

  Just upgraded to Windows 8 and my bar tasks don't hide now, even after clicking on auto-hide settings, I tried applying ok then ' ing, and I tried to get rid of any notification, but usually disappear again :/

  Any help would be thank you very much.

  One of the common culprits that breaks auto-hide is the center of the Action.

  To test: click the Action Center icon in the system tray (it's the icon of white flag), when the window pops up to close it. If the taskbar mask that was the likely culprit.
  You can turn off the center of the Action via the control panel > Notification area icons > the system tray icons turn on or off > Action Center in the OFF position.

• I bought the cloud creative adobe 1 year as uk and I downloaded but I got version track for 30 days. and now I can't use it any more and I need to buy it again. what I've done wrong?

  I bought the cloud creative adobe 1 year as uk and I downloaded but I got version track for 30 days. and now I can't use it any more and I need to buy it again. what I've done wrong?

  Hello

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• One of my computers works very well to display my beneficiaries of my bank online and the other computer says that I don't have any beneficiary, worm 35 on both.

  Everything on my online banking Web site works fine except the display of my beneficiaries. It does not, he tells me that I don't have any beneficiary. This function works very well on my backup computer with 16, 32, and 35 versions.

  That's what my Bank said:
  There was some problems with the compatibility of Firefox to view online recipients. Please, try the following steps to clear the cache and delete cookies. If there is still a problem, start Firefox in Mode safe. While you are in safe mode, press the < Alt > or < F10 > to display the toolbar. Then select Tools > Options > advanced > general. Find and stop using hardware acceleration.

  Boot in safe mode to fix the problem, but it's a bit of a pain. A refreshment or a reset seems a little drastic and I would like to know what exactly is the problem before using the shotgun approach.

  Thank you

  Thanks for the replies. I have try to disable hardware acceleration, but probably no connect fees. My only add-on is edge of adblock and I disabled it for the site. The thing is, I don't want to disable either of these elements. I'll just start firefox in safe mode, if I need to access my beneficiaries. I was hoping that someone may know something that is bad in my profile that has carried over from previous versions or another kind of corruption. It seems strange that an entire site could work very well with hardware acceleration, but not to this one point.