Engravers Blu - ray Samsung SE - 506 Monte is more after the upgrade of the El Capitan

Similar Questions

• try to connect the blue ray player to my laptop, everything works except the connection to the gateway?

  try to connect the blue ray player to my laptop, everything works except the connection

  Hi ArnoldWalterArnold,

  What exact error message that you receive?
  How do you connect your Blu - ray player to your laptop?
  This thread may contain information that can help you:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/playing-an-external-Blu-ray-drive-on-laptop/cfeeeacc-043d-45B7-9570-dbefb9c9172d

• I bought a Sony BDP - S185 connect Netflix Blu - ray player. I can't connect to the wireless router. Why?

  I just bought the blu - ray BDP S-185 drive so that I can access the internet (netflixetc.) on my new samsung tv. I tried to connect to my wireless router, but repeat me my connection type iswired and the connection has failed. Can I connect this player to a wireless router or should it be connected to the router? Difficult because the router is in the basement and the television on the third floor. Can I use the separator on phonejack (existing in the 3rd and.) and connect the two phone and blu ray player or do I need a netgear typedevice to connect this player? Thank you in anvance understand help. Sorry, it's so rambled butI am very confused here!

  Hi Robert,.

  Welcome to the community of Sony!

  This Blu - ray player is the BIV (Internet Video base) base model and does not support the wireless Internet connection. I suggest that you use the Ethernet LAN cable to connect the player to your router/modem.

  Thank you for your message.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• When I try to read Blu - Ray, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Original title: Blu - Ray

  My computer can read blu - ray, but when I try to play one, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "How should I do?

  Hello
   
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray Disc, you must use a non-Microsoft program that supports playback of Blu ray and a device that can play Blu ray discs.
   
  See the article mentioned below:
   
   
  Read a CD or a DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I use a blu - ray disc as my backup media by using the backup and restore, but windows will say still unable to perform this task

  I have a HP h9 - 1250t and can never use a blu ray disc tp save my work using the command from the windows Explorer which is strange since I use blu - ray disc in my dell xps 14, any help on this?

  Hello edilbertojun,

  Backup stores data in a compressed format on optical drives and blu - ray is an optical device device, I don't think you can use Windows built in backup and restore functionality.

  You must use a backup solution 3rd party backup on the Blu - ray disc.

  I may be wrong so that other members of the community can be better able to solve this problem.

  Marilyn

• Are there blu - ray burn programs Adobe, in even more?

  I understand still isn't on the CC, is there another program Adobe has that can make me burn a Blu - ray disc?

  Lol and you can still use still CS6 - she is functional, but won't be updated anymore.

  See you soon,.

  Jeff

• Blu - Ray OK, DVD version gives 'General error' on the construction of disc image

  When you generate the final .iso file of the DVD disc image, I got a warning of 'General error' during one of the final steps. The Blu - Ray since the same project worked perfectly. The error occurred not during video transcoding, but just after the attempt to transcode a file audio small .wav for background music on the menu. Yet once, it worked well for the Blu - Ray, it's 16 bits, 48 kHz, etc.. All menus and video and audio previews also showed no sign of distress.

  Any ideas what to look for? Final for the .iso to DVD transcoding took like 6 hours so I want as supposition little and check the work as possible! Thank you!

  How long is the audio? It may be simply too short to encode a correct DVD. If so, open it in Soundbooth and add silence at the end.

  Mylenium

• Does not start player BDP - BX58 Blu - ray * top of page menu screen more

  Sony unit works very well for about a year now.   Nothing has changed on this end - but - now when I turn on the drive blu - ray I see on HDTV: logo 1) Sony blu ray then) 2 wave horizontal blu and 3) a black screen.

  Instead of 3)-I use to get the * top of page menu * screen for slecting an dvd, browser, etc.

  I noticed that when the device is in step 3) connected to my ethernet (blue light on the power switch of the internet is fixed).    So, I guess that the DVD player is having trouble finding something on the Internet (?).

  At this point, I can't play any DVD - the screen remains black.

  The unit is connected to a SONY AV box.    What is strange, is that nothing has been changed (?)    The latest firmware changes have been installed more than 6 mos ago.

  Help, please.

  solved problem today ' hui - connected hdmi blu - ray box AV Player cable was loose in box AV.   cable just guaranteed and everything is back to normal.  Thank you all for taking a peek.

• Connecting Blue Ray Samsung player to wireless network

  I have a Linksys network with two wireless desktop computers, a laptop and a ROKU player plugged into a router WRT54G. I was told to buy a WAP54G Access Point to connect my Samsung Player to the internet.  I install the software on the WAP54G. When you connect the WAP54G to the Samsung drive it not able to connect to the internet. I also noticed that the laptop would lose its connection to the internet when the WAP54G was?  As soon as I unplugged the WAP54G laptop computer connection back to normal.  Since I am new to this any advice is greatly appreciated.

  With regard to the initial configuration of the WAP54G read this.

  As for the rest of the configuration, it depends on how you connect the WAP54G to the player. Read my comments above.

  Concerning

  Fred

• Drive Blu - Ray Samsung 4 k to 5 k iMac?

  Hello.  Can the iMac 5 k post your 4 k content via an external drive bluray?  I think it's possible, because the bolt of lightning sends and transmits data.  If it won't work, there's a particular reason for this?   Thank you.

  I meant, the thunderbolt connection allows you to send and receive data, so why would he not able to do this?  Mac employees say it is not doable, but not an explanation, so I don't know if they know what is the right answer.

• Why my Blu - ray discs play no more after the application of all updates

  I applied all updates for Win 7 x 64 to my e9180t.

  Media Smart now plays regular DVD but not of bluray. That is what it is?

  Hey TXGuy,.

  Take the update mentioned in the Mr. Do. the process of upgrading to Windows7 if you qualify for the upgrade HP is to load the upgrade wizard HP first disc. It copies all of the updated drivers and applications on the system if you do not have to go hunt down them on HP.COM.

• My Matshita UJ140AS, Blu Ray player will read any media inserted in the drive.

  I uninstalled the device driver, removed the filters in the registry, tried a system restore and Microsoft FixIt application, but the drive will not always read any disk.  This issue started about two days ago.  After that, I did a complete virus scan and the steps mentioned above.  Please help me to solve this problem as soon as possible.  Thank you.

  Hi EJP6431,

  As we tried all possible steps, you may need to contact the manufacturer of the drive about this.

  Bindu S - Microsoft Support

• Samsung Slate PC record not in after the last update

  Hello

  I have a Samsung Slate 700 t PC running windows 7.

  Since the November update, I can not connect.  The screen flashes just before he gets to the login screen.

  I understand that this could be a problem with KB3097877.

  I tried to start in safe mode and safe mode with command prompt. When it gets to the login screen, I touch the icon of connection and loading, it waits a bit then returns to the login screen.

  I did a little research and press f8 for advanced boot menu it was suggested.  Except that it's a touchscreen pc and the wireless keyboard works until I get into windows.

  I've reached the limit of my minimal knowledge and I'm stuck.  Any help would be accepted with gratitude.

  Thank you

  Mel

  Hello

  Yes, you just think the root cause of your issue might be KB3097877. However, your efforts to resolve the issue is highly appreciated.

  If you are unable to start the computer in safe mode, then I suggest you to consult the below thread and see if it helps you to solve the problem.

  Screen flickering and problems log on Windows 7 after installation of updates

  If the problem persists, I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Method 3

  If after performing the above steps, you are able to start the computer and access the desktop then try to Uninstall KB3097877 update if it is installed, and then reinstall it.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• PCoIP desktop driver blue screen when opening/PDF printing to network after the vShield installation location

  I came across this month and again this morning. Last night I reinstalled the driver vShield in the view desktop (Windows 7 32 bit on ESX 5.0) as I am deployment vShield Endpoint with Trend Micro deep security product. After that I will meet my next issue that I thought could have been solved since the last time I tried because I upgraded to ESX and seen since then, but its still a problem.

  This end user usually print PDF files from a network drive and often, but not always, the Office will cut as he planned it blue.

  Does anyone else have this problem? It only occurs after you install the vShield with VMTools driver. I had to uninstall this driver to keep it from crashing.

  Any help is appreciated!

  Ed

  Please refer to this link - VMware KB: invited Windows using vShield driver fails with the error on a blue screen: PAGE_FAULT_IN_NONPAGED_AREA