Equium P300-16 t - adapter which is compatible

Anyone know what "power tip" is necessary for my Equium P300 16 T.
I bought a portable power adapter from Kensington, but it lists my laptop.
I tried Toshiba AND of Kensington technical support, but have had no response here.

You should take a look at the page from Toshiba Europe.
There is a useful box called Options & accessories.

Here you can find all the compatible options for you notebook series!

The page can be found here:
* http://eu.computers.toshiba-europe.com/-> peripheral services & -> Options & accessories *.

Good bye

Tags: Toshiba

Similar Questions

  • Equium L20 - 198 - what adapter could be compatible

    Help please

    I have an Equium L20-198 the AC ADAPTER IS BREEZE AND NOW BEEN ELIMINATED,

    HOW CAN I KNOW QHICH ADAPTER TO BUY?

    Post edited by: Eddies

    Hello

    You need an AC adapter part number * PA3396E * which supports the following specifications:
    * 65W - 19V - 3. 42 A - 100 ~ 240V *.

    Just Google for this reference number or ask ASP such spare part.

    The ASP in your country would be able to order it from Toshiba.

    Good bye

  • Equium P300-16 - which was an original price?

    Hello

    Anyone know what the original price was for the Toshiba Equium P300-16?

    Hello

    I found an offer for Toshiba Satellite Pro P300-1ES (similar to Equium P300) and you can get it for 880Euros.

    Welcome them

  • Equium P300-190 - Question about upgrading the processor

    Hello

    I just have a question for my CPU PC Toshiba laptop, I have a can of Equium P300-190 full to give model number if necessary the cpu is one supplied with the laptop.

    My question is I want to upgrade the processor but do not know which would be the best option and there are limits with the BIOS, etc. on board.

    Any help would be greatly appreciated.

    Probably it is not known to you that upgrading the CPU is not officially supported by the manufacturers of portable.

    The CPU upgrade is a tricky thing... the fact is that the CPU must be supported by chipset and BIOS.
    Where a party would not support the new processor, the unit will not light.

    So even if you use a CPU that is supported by the chipset (Intel GM965) there is a risk that the BIOS could not support the new processor...

    The laptop was equipped with processor Intel Pentium Dual-Core processor T2390 (Merom code name) probably the other CPU Intel Pentium Dual-Core family-owned would be compatible, but to be honest, you won't see a performance improvement...

    So in my opinion it is not worth trying to upgrade the processor...

    In my opinion, you need to replace the HARD drive with an SSD... in that case you will get the performance improvement...

  • Equium P300-16 t - no power

    Hello...

    Not sure if anyone can help me out here?

    I have a Toshiba Equium P300-16t

    Initially when turned on, lights, dvd starts, 2 low beeps (which seems to do it on all laptops) then the screen turns on but would not go further?

    I left the power cable with the laptop off the battery when the battery is charged, press the power button, the button light, 2 seconds, goes off... Nothing else happens?

    Anyone know what may be the problem?
    Or if I can do something to make it work again.

    While the laptop seems to be starting, (lighting of the screen to the top) I tried a new screen, the same result, the new ram and hard disk, always the same result...

    Now without apparent reason, as I said, since the loaded battery, laptop don't even start? (I tried different batteries and without battery but still nothing?)

    Thank you very much in advance for any help anyone can offer.

    Kind regards.

    Deevie

    Hello

    I put t think the battery is the problem.
    If the AC adapter is plugged in the laptop must lights without the connected battery. You have tested the new RAM and the problem persists?
    Well, in this case, the motherboard may be defective or other part as CPU.

    It seems that the laptop can not pass the POST (power on self test) and in this case primarily the motherboard is default.

  • Equium P300-16 t cannot connect to TV via HDMI

    I have an Equium P300-16 t and a TX-32LXD52 TV with a HDMI input terminal. I tried to connect Toshiba HDMI to TV HDMI TV AV control after.

    When I connected the cable the Toshiba reported a change in the display device (he changed the screen resolution), but when I click on the HDMI Out icon, it says could not connect.

    I just noticed that it says in the manual of the TV that the input terminal is not adapted for use with computers.

    I use a son plated gold.

    SPECIFICATIONS:

    Cable: Double shielded
    Color: black
    Length: 1.5 m
    Connections: 19pins - 19pins DORÉ

    Compatible with all devices that use 18 or HDMI 19pin ports:

    Box of HDTV, PS3, Sky HD, HD-DVD recorders/players, other Set Top Boxes, video monitors, projectors, LCD and PLASMA TV etc.

    The note in the TV guide really means I cannot use the installation of Toshiba HDMI or is there something I can do to work around it?

    Thank you

    You have a FULL HD TV?

    You can switch between using the FN + F5 key combination?

  • Equium P300-19O does not start

    Hi all

    I have an Equium P300-19O, which I have had the problem. Now the pc doesn't even start not at all. When I turn it on, there is not even a power light and it doesn't do anything.
    Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?

    Best regards

    Taro

    > Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?
    You must understand the hat on this virtual path that nobody of can say for sure what is wrong there and we can only speculate on the potential problem.
    Who knows what's wrong there. Maybe there is a problem with electronic control gear.

    Unplug the power plug, remove the battery and leave it for a while. Try to start the laptop with AC power only.
    When you connect the AC power supply is LED on indicator system turned on?
    Is there a reaction when you press the power button / stop?

  • Equium P300-190 power - free problem

    Hi all

    This is my first post here/first Toshiba number after owning my laptop for about 4 years!

    I have a big problem with my Equium p300-190, with a Li-ion battery.

    This morning, there seems to be a problem with my diet. The connection of the charger would change quickly load and then do not load per second or more.

    This continued all day until the computer turns off suddenly.
    Now even when the charger is connected, the lights on the front of the computer not able to save it as a laptop.

    Initially, I thought it was a charger problem, but the computer turns off when the power of 43%. I was wondering if someone can help me to determine if it is a battery problem or a problem of motherboard, as well as the suggested courses of action.

    Any help is really appreciated!

    > Now even when the charger is connected, the lights on the front of the computer not able to save it to the loading of the laptop.

    This means that the power LED and AC adapter LED don t light even if the AC adapter is plugged?

    In this case the new, good working AC adapter must be connected to verify if she s AC adapter or mobile phone related problem.

    Just FYI: I n t think that the problem is battery since the laptop should work fine with the AC adapter only. Even if the battery is removed and AC adapter connected, the laptop must turn on

    So either the AC adapter or portable s hardware problem.

  • Equium P300-16 t - system error writing Configuration data

    Salvation message for the first time

    I have a Toshiba Equium P300-16 t and it has developed an error starting on the screen, it says

    System error writing Configuration data
    F1 - F2 CV - Bios settings

    When it appears that I can't get the option of recovery for work the bios settings seem to be completely in-accessible.

    This error appears just under the version number of the bios and the specifications of the RAM, just after the toshiba screen. The laptop is also a beep which I think is its length bios error code just two beeps very loud and even with a very short break inbetween

    On the page that appears after F1 (curriculum vitae) is pressed it shows just an another two options that are
    F2 - Setup F12 Multiboot Menu selection

    None of these options no matter what and the system is just idle on this screen.

    Obviously, without the bios menu there is not much I can do

    Really research help solve this problem as im not very clued up on the configurations of the system

    Oh and incase it allows... BIOS version - PhoenixBIOS 4.0 release 6.1

    Thanks in advance
    Kris

    Hi mate

    It would be interesting to know if the HARD drive is listed in the BIOS.
    Could you if you please check this?
    In the BIOS, you should see the HARD drive and HARD drive details
    If it is not visible, then that would mean that the HARD drive is faulty and therefore the operating system cannot be started.

    In this case, the HARD disk needs to be changed.

  • Equium P300 - need to cap - key to the SHIFT key

    I have a laptop Equium P300-16 t and I broke the clip on the SHIFT key.
    Does anyone know where I can get one, or knows someone who is compatible thank you

    Post edited by: menthas

    Hello

    I think in this case you need a new keyboard because there is no single room for the keyboard and only the entire keyboard can be ordered and replaced from an authorized service provider.

    Then you should get in touch with the guys and ask again keyboard. Usually the keyboard isn't if expensive so Don t you worry not about it. ;)

  • Equium P300 does not correctly identify the Play Station

    I'm running Vista Home premium, Equium P300. When I plug my Sony PSP, it shows as a mass storage device. When I try to access it, I get a message telling me to format the drive. I formatted the memory stick duo via the PSP, if I try to format it through the laptop I get the message:
    Impossible Windows in full format.

    In the section of the administrator of the PSP tool storage is displayed with a file system RAW instead of the FAT file system its supposed to be, my drive is in NTFS. I have it plugged in to another pc running Vista and it works fine so it's my phone that is the problem, not the PSP.

    If someone could help before laptops and the PSP go for a swandive by the window, I would be grateful.

    Hello

    Reading your post I m not very well what problem you have
    You intervene on memory stick duo

    According to the manual of the P300 memory stick duo is NOT compatible with the card reader. The card reader is:
    -SD up to 2GB
    -SDHC up to 16 GB
    -MMC up to 2GB
    -Memory Stick up to 128 MB
    -Tick Pro memory up to 4 GB
    -up to 2GB xD

    Memory Stick * Duo * isn't on the list!

  • Equium P300 - 16t power problems

    My laptop Equium P300-16 t has suddenly stopped working. When it is connected, the power icon is always on view, but the battery icon has disappeared, and the battery icon when you press the power button flashes red for a few seconds before disappearing... it means I need a new battery?

    I thought that the computer could work without the battery, if it was still not able to connect to a power supply via the power adapter? I just wanted to check before you buy a new battery, I don't want to spend £50 on something that is unnecessary, especially if I have to buy a new laptop.

    Any help would be appreciated.

    Hello

    I don t think you need a new battery because the laptop should work without the battery only on the AC adapter.
    I guess that this problem is related to the motherboard or components (RAM) on the motherboard.

    Guess what? Try this:
    Disconnect the power adapter and remove the battery.
    Now press the power button / 30 sec long. Connect the two parts, then try to turn on the unit.
    To be honest I m not sure if this would help you but it s worth a try

    If this does not help, delete one of the RAM modules and test the device using a module in each slot, but in the worst case it is a motherboard problem, and this should be verified by a Toshiba ASP

  • Equium P300-19O - black screen and does not restart

    My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
    I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

    Please suggest anything that could help me get the laptop again.

    Hello

    Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
    Maybe you can also try a system restore to a previous state.

    If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

  • Equium P300-16 t - Chicony Webcam problem with Vista

    I have an Equium P300-16 t and when it is connected to the broadband router, everything is ok!

    However, when the use of the laptop wireless and with the help of MSN Messenger (with webcam running) it keeps freezing upwards and after a short period of time will continue to work, then keep freeze again--almost as the buffer continues in full and it is having to refresh

    There is a mention of this on the support pages that mentions KB934374 which is supposed to be part of the MS Vista SP1
    I installed this SP, but Ko in question is not part of it, and I can't seem to locate an individual download for this KB

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=faq_selection&CFID=Windows Vista & FID plus TIU0000003b66

    Any ideas anyone (other then throwing the phone against a wall and stating that it was an accident!)

    Hello

    After searching on Google for this KB, I found the 'hotfixshare' site, which includes this fix. The only thing is that you have to register on their forum, but it's the only thing...

    Later, you can download this hotfix and check if it works. I would say also allows you to download the latest webcam driver for your machine on the European driver download sites because they could possibly solve your problem.

    Welcome them

  • Equium P300-16 t - replacing the DC cable

    I'm looking to replace the DC-cable on a laptop Toshiba Equium P300-16 t, everyone has instructions to disassembly and Assembly (including photos if possible)

    Thank you

    null

    If your adapter is faulty, buy a new
    It s not expensive

Maybe you are looking for

  • What for SA20-S103 RAM module?

    Hello I have a toshiba SA20-S103. I think to upgrade the capacity of the RAM, but I don't know that I can use it, because it seems that my type of laptop is not in the database online of the RAM. Is there anyone who knows with certainty what type of

  • Satellite A300 - 1 DG-easy keys do not work on Windows 7

    My easy key do not work, but are the fn keys. I installed all the drivers for Windows 7 64 bit and that they still do not work? Help, please

  • Lenovo, 14 3 Yoga

    Hello, I would consider any graphic card, because in my country, each seller do not mention on the dedicated card. So my question is that each a unique model of YOGA 3 14 with i7 have dedicated card GF940m? Or there are some models only with integrat

  • The desktop icons back to the generic icon of IE

    I use Vista Home Premium on a new computer.  When to create internet related shortcuts (e.g. Yahoo) I get a generic IE icon 'E '.  After changing by another icon, so that they don't look alike, on reboot they come back to the generic 'E '.  When I cl

  • Compellent SAN - replacement of disks not assigned

    I was wondering if someone could help me with a problem with my compellent san. I had a hard drive crash and bought a replacement, when I put it in it sees the drive, but it is not attributed. When I'm going to assign it to the folder I get an error