Snap guide until a shadow merge option?

Similar Questions

• When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours Unite

  When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours uninstalling a bunch of useless software on my laptop and still photography will not merge the HDR sequence. It worked once before, but now it does not work. Help!

  I just 8 GB of RAM and have been able to put together five separate images HDR images. I compared these files 5-image HDR with files - 2 and 3-image and see improvement very few (if any) using all five. Your results may vary, but you can try to reduce the number of images until you get your new laptop.

• I don't see the guides until I click.

  I don't see the guides until I click. On all other adobe products, you can see the guide when you drag. That's how it is used to be the case in Acrobat. Is there a way to turn this feature back on? I use a mac and adobe domain controller.

  This is a bug, and as far as I know, there is nothing, Mac users, can we do to get our rear guides while moving up to what Adobe corrects this problem.

• Merge options

  Hi I am using merge options in PS6 bevel and Emboss. But when I select B & E the options change to (structure, style, technical, etc.).  Options remain under General and advanced mixing options).  The operating system is Mac. All ideas

  Nevermind I figured it.  Right-click.  Rookie mistake.

• Illustrator is snapping to the point without the option selected.

  Illustrator is snapping to the point without the option selected. Anyone else noticing this and what is the solution. Yes, I restarted illustrator.

  slange,

  Then, it may be time to see.

  The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must save curent work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Apply the multiple merge options to the same layer?

  How can I apply layer several options to a single layer of merger? Currently, when I select a merge option and switch to the other, it removes the previous merge option

  Thank you.

  You can duplicate the layer and the upper layer the second blending mode value. Or you can create an adjustment layer and set its blending mode for the second favorite mode (this will blend a visible merged copy of the layers under DOS in the visible stack). It depends on what you're trying to do. In general however, blending modes are a mixture of pixels in a layer in a visible merged copy of those below, to add two modes to a layer seems impossible.

• Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

  Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

  Thanks for your time

  Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  

• SHORTCUT TO MERGE OPTIONS

  Is there a keyboard shortcut for the merge for the selected layer Options?

  A website says CTRL-SHIFT-O, but this does not work in CS2.

  I use CS2 in Win7.

  Take a look at keyboard shortcuts in the Edit menu. If you don't see blending modes, you can create an action and then create a shortcut for the action.

• Inaccessible merge options

  I can't merge (or layer effects) options.

  When I try (by double clicking on the layer or even the icon at the bottom) a warning appears saying:

  "Could not complete your request because of a program error?"

  What can I do?

  Hello

  Which version of photoshop and the operating system are you using?

  Photoshop is up to date?

  (Help > updates in Photoshop)

  Reset the photoshop preferences often heals the problems, so I would start with that.

  http://forums.Adobe.com/thread/375776?TSTART=0

• I found the guide until I downloaded I want to ask the community

  called webloc translator program grannies know want to know if it is safe and if that's what he says, he does until I downloaded because I have a lot of webloc files that I need and open, they were created on Mac and I am moving them to a Windows PC a Windows 7 PC

  Please note, application on the Mac installers are typically in .pkg format which is not compatible with Windows.

• Help: Merge Options does not work on my Photoshop CS6 (64-bit)

  

  but when I do the background of my layer his work just on the bottom layer

  

  but still does not work on the 2nd layer blending Options

  I hope someone can help me. Thank you

  It seems layer 0 with a (white) fill, but the 1 layer is transparent, not filling that could interact with another layer with a blending mode.

  Also because it is transparent the layer effects will not be highlighted. Try a white fill on the empty layer.

  Thanks for the screenshots. This makes things easier to spot like this.

• Why don't I have the photo merge option in LR CC

  I can't find anything online.

  Have you checked your application manager to see if there is an update available for Lightroom? Your application manager is up-to-date?

  Another thought. You can go to this site and download the latest version of creative cloud and install it manually:

  Update of Lightroom

• Rows in the table LT until merger of all workspaces

  Database 11.2.0.4

  In our environment, we ran a few important updates in the workspaces and then merged these live workspaces.  Up to 25% of the data has been updated in those workspaces.  When these update batch workspaces have been created, previous workspaces exist who are not yet ready for the merger.

  I noticed that the underlying tables of the LT now have about 25% more lines than the live view.  We have now discovered that dbms_wm.refreshWorkspace works really poor.  This statement is used to take seconds or minutes to the maximum, but can now take half an hour or more.

  We recorded a support with Oracle request and provided details of the plan to see if we can get some resolution/advice explaining.

  In the meantime, I have a question for the forum help my understanding of the works of the Manager of the workspace.

  In the example below, I have table "wm_test_table", "test_workspace1" and "test_workspace2".  In "test_workspace1", I update all rows in the table - the table LT now has 2 rows for each record.  I merge 'test_workspace1' live and LT still has 2 rows for each record.  The other lines are not removed until "test_workspace2" is merged and removed.

  
  

  SQL> -- Create a test table
  SQL> create table wm_test_table (
    2     id integer primary key,
    3     name varchar2(100));
  
  
  Table created.
  
  
  SQL> -- Insert 1,000 rows
  SQL> insert into wm_test_table (
    2     select rownum, 'before'
    3     from dual
    4     connect by level <= 1000);
  
  
  1000 rows created.
  
  
  SQL> commit;
  
  
  Commit complete.
  
  
  SQL> -- Version enable it
  SQL> execute dbms_wm.enableVersioning('wm_test_table');
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> -- Create two workspaces
  SQL> execute dbms_wm.createWorkspace('test_workspace1');
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> execute dbms_wm.createWorkspace('test_workspace2');
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> -- Go to test_workspace1 and update all the rows
  SQL> execute dbms_wm.goToWorkspace('test_workspace1');
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> update wm_test_table set name = 'after';
  
  
  1000 rows updated.
  
  
  SQL> commit;
  
  
  Commit complete.
  
  
  SQL> -- Check how many rows in wm_test_table_lt - we expect 2,000 as we haven't merged yet
  SQL> select count(*) from wm_test_table_lt;
  
  
    COUNT(*)
  ----------
        2000
  
  
  SQL> -- Merge and remove test_workspace1
  SQL> execute dbms_wm.goToWorkspace('LIVE');
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> execute dbms_wm.mergeWorkspace('test_workspace1', remove_workspace=>true);
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> -- Check how many rows in wm_test_table_lt
  SQL> -- I'd hope there'd only be 1,000 but there is 2,000
  SQL> select count(*) from wm_test_table_lt;
  
  
    COUNT(*)
  ----------
        2000
  
  
  SQL> -- Let's see if compressWorkspace will get rid of them
  SQL> execute dbms_wm.compressWorkspace( -
  >       workspace => 'LIVE',   -
  >       auto_commit => true,   -
  >       remove_latest_deleted_rows => true);
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> -- They're still there
  SQL> select count(*) from wm_test_table_lt;
  
  
    COUNT(*)
  ----------
        2000
  
  
  SQL> -- Now merge test_workspace2
  SQL> execute dbms_wm.mergeWorkspace('test_workspace2', remove_workspace=>true);
  
  
  PL/SQL procedure successfully completed.
  
  
  SQL> -- and the additional 1,000 rows are removed
  SQL> select count(*) from wm_test_table_lt;
  
  
    COUNT(*)
  ----------
        1000
  

  Is it possible to safely remove the extra lines in LT without waiting until we merged the workspaces that existed before the update batch has been done?  I hope that it will so improve the performance of refreshWorkspace.

  
  

  I thought that something like this can do, but it does not remove the other ranks, is:
  

  execute dbms_wm.PurgeTable(
   table_id => 'test.wm_test_table', 
   archive_table => null, 
   where_clause => 'id not in (select id from test.wm_test_table)', 
   instant=>null, 
   workspace => 'LIVE', 
   purgeAfter => false);
  

  This question is similar to

  Lines left in the table LT after removal of the direct workspace and the removal of all workspaces

  and

  How to delete soft deleted records?

  but I'm still not sure.

  Thank you

  John

  Hello

  This behavior is expected and it is due to the test_workspace2 workspace.  A compression operation will not allow compressed range to include a backup implicit point that is created for a child workspace.  This is done to preserve the integrity of this workspace.  The initial 1000 lines are all lines that are visible from test_workspace2.  Removal of these lines would leave test_workspace2 will 0 lines in there.  Lines 1000 updates are the lines that do not appear on LIVE.  So, given that the two sets of lines are needed, none of the lines can be deleted physically.  A compression operation will never change the view of data for any workspace.  It only removes the unnecessary records.  The two options in order to be able to compress these lines is to either delete (as you did) or refresh test_workspace2.  The refresh operation would move the implicit savepoint for the workspace to a version that isn't after all 2000 lines in the table _LT and allow the dressing to remove first half of them because they are no longer needed by any child workspace.

  With respect to the performance of RefreshWorkspace, I would need to see a trace of the transaction file.  But who should rather get through the SR you filed.

  Kind regards

  Ben

• Problem: Blending options change when the merged layers

  Hello.

  I have a problem with the merge options. When I merge two files that both have effects, I get a layer display does not resemble the front. It looks like some options I applied seems to be 30% of what they were. For example, I got a text in a single layer with bevel and applied stamping and another layer (bottom box) with shadow bevel and inner. Now, when I merge these two, I can see looking bevel effect as the opacity is set to 30% for them, the text and the background remaining intact. Effect similarly degraded and not the shadow that was applied as weel looks like changed, but change the bevel cut.

  I noticed that if I turn this layer with the effect bevel in smart object, same thing happened. But even once, gradient stay unmodified.

  The general mix options are by default, normal mode, opacity 100, complete knockout 100, opacity, none, RGB, mix of Cup and the form of transparency is checked on. I didn't change anything there.

  Bevel options are: Pillow emboss, smooth, 100% depth, direction up, size 4, soften 0, angle 90, altitude 30...

  Any help?

  Thank you

  View 100% of the size when you merge. Do, they are different then?

• How to disable the option of merger in FDM

  Hi guys
  How we can change the setting for the import file. I want to disable the Merge option while export

  This can be done by changing the relevant adapter option. Connect to workbench and expand the relevant adapter do, you can view the options. Double click on the option of load method and delete the value of the merger of the selectable values in the Option list