Problem: Blending options change when the merged layers

Similar Questions

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• I want to just state change when the data set are called in GridItemRenderer

  I have a GridItemRenderer here, however when the user mouse over it the States returns to criticism, I want only state change when the data value is called

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:GridItemRenderer ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  clipAndEnableScrolling = 'true' currentState 'critical' = >

  < fx:Script >

  <! [CDATA]

  import of utils. UsefulConstants;

  override public function set data(value:Object):void

  {

  Super.Data = value;

  put the text in red to indicate the old value

  {if (Data)}

  {if (!) Data.dateAcknowledged)}

  this.currentState = "critical";

  }

  ElseIf (data.dateReceived.time - data.dateReceived.time > UsefulConstants.oneDay) {}

  this.currentState = "warning";

  }

  ElseIf (data.dateReceived.time - data.dateReceived.time < UsefulConstants.oneDay) {}

  this.currentState = 'safe '.

  }

  Else if (data.status == 'CLOSED') {}

  this.currentState = 'safe '.

  }

  else {}

  throw new Error ("unexpected conditions for data.dateReceived.time - data.dateReceived.time'");

  }

  }

  }

  []] >

  < / fx:Script >

  < s: states >

  < name s: State = "critical" / >

  < name s: State = "WARNING" / >

  < name s: State = "safe" / >

  < / s: states >

  < s:HGroup x = "-1" y = "-1" width = "100%" horizontalAlign = "center" verticalAlign = "middle" height = "100%" >

  < s:Graphic id = "icon" includeIn = "criticism, warning" x = "-1" = "5" width = "16" height = "20".

  version = "2.0" viewHeight = "600" viewWidth = "200" >

  < s:Ellipse width = "88" height = "401" = "58" x y = "37" >

  < s:fill >

  < s:SolidColor alpha = "1" color = "#FE4744".

  Color.Warning = "#Ff7f45" / >

  < / s:fill >

  < s:stroke >

  < s:SolidColorStroke color = "#FE3D44" alpha = weight '1' = '1' / >

  < / s:stroke >

  < / s:Ellipse >

  < s:Ellipse width = "51" height = '97' x '79' = y = '478' >

  < s:fill >

  < s:SolidColor alpha = "1" color = "#FD8E9E".

  Color.Warning = "#f69240" / >

  < / s:fill >

  < s:stroke >

  < s:SolidColorStroke color = "#942EC8" alpha = "0.62" / >

  < / s:stroke >

  < / s:Ellipse >

  < s:Ellipse width = "31" height = "147" x = "72" y = "122" >

  < s:fill >

  < s:SolidColor alpha = "1" color = "#FD8E9E".

  Color.Warning = "#f69240" / >

  < / s:fill >

  < s:stroke >

  < s:SolidColorStroke color = "#942EC8" alpha = "0.62" / >

  < / s:stroke >

  < / s:Ellipse >

  < / s:Graphic >

  < s:Graphic

  includeIn = "safe" width = "20" height = "20" version = "2.0".

  viewHeight = "600" viewWidth = "600" >

  < s:Path data = "M49, 294 L245, 410 L 551, 116 C 551, 116 259 519 257, 516 L 49 of the 294Z" winding = "not null" x = "-13,5" y = "-57.3" = "1.051689863204956" scaleY scaleX = "1.122194528579712" >

  < s:fill >

  < s:LinearGradient = "49" x = "115.95" scaleX = "402.4029386075604" rotation = "18.660078428615776" >

  < s:GradientEntry color = ' #359F66 ' ratio = "0.006535947712418301" / >

  < s:GradientEntry color = ' #7EFA4A ' ratio = "0.9803921568627451" / >

  < / s:LinearGradient >

  < / s:fill >

  < s:stroke >

  < s:SolidColorStroke color = "#C6A470" alpha = weight '1' = '1' / >

  < / s:stroke >

  < / s:Path >

  < / s:Graphic >

  < / s:HGroup >

  < / s:GridItemRenderer >

  Override getCurrentRendererState() to return the correct status based on the data.

• Change in the merger of insert and create a procedure for updating the records after

  Hello
  
  I have a table that contains about 50 M lines of partition, and every day I have an application that performs a merge to insert records statement about 100 k per day and it's 300 M updates a day.
  
  Because I both update and insert the application performs a merge.
  I need to make at least 500 M, updated day by day, and for this reason this solution doesn't have enough performance for what I'm asking.
  
  I think another solution that I will try to implement now, and I just posted this in an attempt to get help on the option that I may have to do.
  
  I want to start putting in place:
  -Locations is updated 'last_record_date' using 'KEY1' and 'Key2' "KEY3";
  -Change the application to only inserts into a temporary table.
  -Have two procedures, one that takes the new records from the temporary table and inserts it into the final table, and another that selects records which is updated and perform an update.
  -This two procedures will choose the records and delete them from the temporary table (or mark them as updated\inserted).
  
  The volume is very large, so performance is a challenge! That's why I'm writing this, because a solution with enough performance for the intermediate stage will be difficult.
  My final table is partitioned by date and the date is the area that I need to update (instead of create daily partitions in order to reduce the frequency of the movement of the line, I create monthly partitions)!
  It is currently my table definition:

  CREATE TABLE MY_TEST_TABLE
      (KEY1                           VARCHAR2(50 BYTE) ,
      KEY2                         VARCHAR2(50 BYTE) NOT NULL,
      KEY3                           VARCHAR2(50 BYTE) ,
      last_record_date                    VARCHAR2(50 BYTE) NOT NULL)
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
     STORAGE   (
      BUFFER_POOL DEFAULT
    )
    NOCACHE
    MONITORING
    ENABLE ROW MOVEMENT
    PARTITION BY RANGE (last_record_date)
    (
    PARTITION MY_TEST_TABLE_201112 VALUES LESS THAN ('20120101')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION MY_TEST_TABLE_201201 VALUES LESS THAN ('20120201')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION MY_TEST_TABLE_201202 VALUES LESS THAN ('20120301')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION def VALUES LESS THAN (MAXVALUE)
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING
    )
    NOPARALLEL
  /
  
  
  
  -- Constraints for MY_TEST_TABLE
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY1" IS NOT NULL)
  /
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY2" IS NOT NULL)
  /
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY3" IS NOT NULL)
  /
  ALTER TABLE MY_TEST_TABLE
  ADD CONSTRAINT pk_MY_TEST_TABLE PRIMARY KEY (KEY1, KEY2, KEY3)
  USING INDEX
    PCTFREE     10
    INITRANS    2
    MAXTRANS    255
  /

  Thank you
  Ricardo Tomas

  naoseionome wrote:
  Hello

  My version is:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  It's the DOF I used to create the database.

  The merger is common during every day for about 10 M records.

  There are several methods to do the update, but they do sequencially to avoid deadlocks (because I can't control the source and each process can update the same keys.

  The update uses "KEY1, KEY2, KEY3" to update the value 'LAST_RECORD_DATE' have impact by being date or varchar2?

  I'm still waiting to receive permissions in order to follow up the matter, but in the meantime, in that I am trying to implement this work around in order to accelerate a development in the case where it would be necessary! Comments only I have at the moment, it is that he is not able to process the total amount of records timely (order book is generated).

  Thank you
  Ricardo

  Well, the first thing we do is to change the type of data type varchar to a date. The main impact is that a date is not a string, it's a date. If you are adding data processes in different date formats (which is possible when you use a character to store information) you're going to be very sad (good luck converting back an effective date).

  An example of how this can happen easily.

  ME_TUBBZ?select to_char(sysdate) from dual;
  
  TO_CHAR(SYSDATE)
  -----------------------------
  12-jan-2012 10 55:33
  
  1 row selected.
  
  Elapsed: 00:00:00.01
  ME_TUBBZ?alter session set nls_date_format = 'yyyy-mon-dd';
  
  Session altered.
  
  Elapsed: 00:00:00.01
  ME_TUBBZ?select to_char(sysdate) from dual;
  
  TO_CHAR(SYSDATE)
  --------------------
  2012-jan-12
  
  1 row selected.
  
  Elapsed: 00:00:00.00
  

  Assuming that the client passes the column as an Oracle DATE will make an (implicit) conversion to store the data as a string, which will be based on the current settings of the NLS for the session. This allows also for someone to completely non-jour the information in the column (super bad). It's just really bad form to use strings to store dates, numbers, anything that is not naturally a string.

  Based on the description of your problem, I can't imagine how your partitioning scheme performs one action in another that require more work in order to process the updates (which are most of your needs). Partitioning does not equate to increase performance. It is a tool that, like every tool has its place, but I do not think that this is justified for what you do (certainly not how you currently use it anyway).

  I say no partitioning can not be useful for you, but I don't think that on the column that you are currently using is 'good '.

  Something I would like to personally study (must be able to compare this approach to your course, if you need parameters for comparison) if I were you would be using a Table Index organized for it. It will take more time to perform the operations insertion, but that is a small part of all the work that you do for this process. For updates, it should eliminate a lot of IO, assuming that you are doing an INDEX seek followed by a table access by ROWID to perform updates. This recommendation assumes that everything you said is true. You have 4 columns in your table, of which 3 are components of the primary key and the 4th is a date (note I did not string :)) and that you refresh mainly, not fit.) Also that you have no 'secondary' on this entity index (and none are needed).

  I would investigate this approach before the solution of temporary table that you are currently studying.

  See you soon,.

• The selection list value does not change when the page is sent

  Hi all
  
  I have a selection list that acts as an entry for the report. the page is submitted using a button.
  The button uses the branch option "redirecting to page in the application. I select the same page.
  
  The problem is when I change other values in the value list always takes the first value
  
  I want to know if the problem is with the key or select list. What should I do about it?
  
  Concerning
  REDA

  Renon wrote:

  I tried your suggestion. Now that I ask, is the report is expected to show only when the button request is passed. I read to present the action of page the name of the button acts as a request.
  so now my report status is request = Expression1 and value of expression1 takes GO tell button name.

  The report does not appear but. I checked the session. It has the value of the selection list and the page is submitted as but the report is not displayed.

  ASK is disabled before the exposure treatment page unless it is set in a branch or a URL, this is why it has no value when they are referenced in your State in the region.

  Set the attribute request in your branch for & request to make available at the course to see the page the current value of the demand for treatment.

• Legend field size changes when the cursor moved legend

  So weird, I don't even thought it, but here it is:

  In VI attached, I have legends of the parcel next graphics, if I can put checkboxes next to them for the turning on or off the channel display.  In the third, I need to include the sliders, but when I did the legend of cursor visible and moved (it automatically appears on the side, under where I put the legend of the plot), the legend of plot in size changes.  It is shortened, which is annoying, but also means that it is more aligned with the checkboxes.

  I tried to use the PlotLegend:Height property and managed to _read_ it is, indeed, evolution, but I can't put it (or rather, I can't do it to _stay_ together).

  Even more strange: when I open the file on my laptop, the problem of size change does not occur, BUT the legend of the plot begins with a different size of the boxes!  I know that I can use 'Objects to scale with the Panel', but I've always shied away from that, due to problems of size and text beside it, since I am defining the size of the Panel, things really should be the same size, anyway.

  Because of the issue of the different-monitor-size different, I don't know if the version of the file's "modified" screen will show the problem, but I have attached, in the case.

  Any ideas?

  specifications that might matter:

  Desk at work: machine card Dell with Windows7 64 bit AMD Radeon HD7470 graphics LabVIEW 2012 SP1

  laptop at home: Dell Latitude E5430

  Thank you!

  Well, it's certainly weird - it does on my PC as well. I have no explanation for it.

  Perhaps a solution you can use the checkboxes in the visibility field integrated instead. You wouldn't need a separate control.

  Right click on the legend of the plot and select 'Visible Elements' > 'plot visibility Checkbox.

• Position/size of the buttons changes when the state changes

  I have a lot of problems with forms configured as buttons ("use like button" checkbox checked) changing position on the stage, or changing size, when their States change. In other words, the size or position of a shape is different when the condition is 'Flipping' or 'Down' as opposed to the "Normal" position Are you looking for assistance to understand and control the behavior of the button shape.

  Thank you.

  What version do you have? It was a bug in the first release of 9. The current version is 9.0.1.320.

  Take a look at: release notes for Adobe Captivate 9.0.1

• Tab order changes when the file is downloaded from the internet

  I have a couple of files created in InDesign CS6, saved in PDF format, modification of LiveCycle ES2 to allow a user to complete the forms. On my desk, the tab order works as I dictated, during the validation of the online form, the changes in the order tab.

  Any suggestions on how to fix this?

  Yes. The Acrobat plugin is no longer compatible with Chrome, then when you open the file it using its internal PDF plugin, which is known to be below normal.

  This could explain the problem that you see. You must report it to the developers of Chrome.

• Colors change when the downloaded on Youtube (desaturated)

  I found an old discussion about the same question, but it was not an answer.

  My videos colors change when I upload them on Youtube. Colors are desaturated roughly. I can solve the problem of really saturated video rendering, but y at - it another way to avoid the colors to change?

  I use first cs6 and Windows pro. I used the h.264 settings, but I think that I had this same problem with other parameters too (but not sure). Should I try with other rendering parameters or wrong my creation parameters?

  Thank you!

  Problem solved! Somehow, the problem was my internet browser, Google Chrome. With other browsers, I don't have the problem of color. And after you reinstall chrome it works also very well with Chrome.

• Message: Shared spreadsheets cannot be changed when the number is offline now

  I just updated to IOS10. I can open all other spreadsheets in numbers (shared and non-shared) bar one when I get the above message.

  Locations - iCloud drive

  Hello babciax2,

  Thank you for using communities of Apple Support.

  I see that you are not abel to open a Numbers spreadsheet and get the error in quotes. This sounds like this document is defined for collaboration. Collaboration for numbers is explained in the following support article: collaboration for Pages, Numbers and Keynote

  This section describes what you see:
  

  Change when you are offline

  On Mac and iOS, you can only open a shared document when your device is connected to the Internet. If you are not connected, or if you switch to offline mode, all working, the application displays an alert asking if you want to work on a copy of the document offline.

  Best regards.

• the blocked sites listed in options disappear when the browser is closed. have to list them all once again, if I want to disturb.

  Listed in a short list of sites from where I want Firefox blocks cookies (doubleclick, for example), following the instructions on https://support.mozilla.com/en-US/kb/Enabling%20and%20disabling%20cookies. However, when I close the browser, the next time I open it, the list is empty. Of course, I get cookies from the sites I want to block.

  Hello

  You may need to disable the Preferences of Site in (Alt + T) Tools > Options > Privacy > settings. Please also see that.

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Which is preferably that? module -quickly decode about: config entries - after installation, go inside on: config, right-click preferably, enable (check) results of MozillaZine Board, and once again right-click a pref and choose MozillaZine reference first.

  Keyboard shortcuts

  Files & Firefox profile folder

  Safe mode

  Problematic Extensions/add-ons custom

  Troubleshooting Extensions and themes

• Use a channel when you declare two and it changes when the program runs.

  Hello

  For the use of a map of 4461:

  With the use of the library DAQmx:

  When I use 'Create Channel.vi' I can to use 'Ai0:1' to use the 2 input channels. Then I use the Nchannel Read and split the signal with for example a "Board index".

  But is it possible to change the channel numbers 'on the fly' so when the program is running?

  The same question with the outputs

  When I use the channel to create for outings and I use Ao0:1 to use 2 output channels, can but I change to a single channel when the program is running. Nchan write.vi is used, and this requires 2 channels. The use of a channel will give you an error.

  Is there a nice way to handel this?

  Greetings.

  You can change the output to a level of 0 volts instead of what you read. It should be just a case statement and the writing remains the same.

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Color Photoshop image changes when the mouse hovers over it

  Hello

  I installed Photoshop on a new server and when I open an image in Photoshop displays colors incorrectly. If I then move the mouse to the images it then corrects the color. I see not why he did it because I didn't see any changes to the default settings during the installation. Does anyone know why it does this?

  If I take an extract from the image and paste it into word, the image is fine, so it is on display in Photoshop at fault.

  Any help would be greatly appreciated.

  Sean

  Hello

  now, I found the resolution to this to Photoshop when it is installed on a Citrix Xenapp server and which was to change the following registry -.

  [HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\ica\THINWIRE

  "DISABLEOSSFORPROCESSES"IS"PHOTOSHOP. EXE; ILLUSTRATOR. "EXE"

  Thank you for your help.