Socket DVI - d / port seems to have blown

Similar Questions

• Two screens DVI on Port Replicator II with Tecra S10-160

  Hello to all 2!

  Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
  A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

  My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

  Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

  Hope you got my point and have information or ideas for products for me.
  Thanks in advance.

  Hello

  Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

  I mean such a cable like this

  Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)

• Impossible to use the DVI - D port with cable DVI - D Pav 500-100 a to HP W2207 monitor

  I have a new standard of factory Pav 500-100a without mods.  HP w2207 monitor.

  Currently properly connect with VGA DVI - D port with the adapter supplied with the pc.  I have install Windows Update 8.1, put in my files from my old PC and everything was fine except the video is not very good.

  I got a formwork of cable DVD, but it's a DVI-I have the cable.  It took 5 minutes before windows comes up and then whenever the background picture changed in the theme which he suspended for a few seconds.  I read that I have a DVD-D need cable which i purchasd today.

  The package says it's a CL-DVI2M - DVI M/M 24 + 1 CABLE 2 M.  The tech in the store said that it is a good calbe and works perfectly.

  When connected and power until I get the hp and rolling points logo, then it turns off.

  I reconnect the cable VGA and all its beautiful - using the VGA to DVI.

  I ran msconfig and turned from secure boot - restarts and comes well in safe mode.  I set the resolution of 1280 x 800 and rebooted and reconnected the cable DVI - Virgin again.

  If I put the cable VGA back inside fine boots.  The monitor was given factory and seens the DVI connection but Windows remains empty. Also tried to start first with no cable - connect the DVI and the monitor remains in sleep - be able to reset the monitor and still a Virgin is also no connection DVO.

  I have fI switch with connected DVI I can get to the BIOS, and I see the HP logo and the points Win 8 starts.

  I don't know what else I can try.  I have no other usable with DVI video card

  Any ideas out there?

  Pls help - Steve

  Although I am an employee of HP, I speak for myself and not for HP.

  Yes, I rasthaus the monitor and cable of my older Compaq running xp and all fine on DVI.  The monitor and cable are fine.

  Since then, I've had a product in Australia specialist help.  Tried all the previous things, then initially went to check if the person had been doing the right thing - connected the VGA monitor with the supplied adapter DVI-d port - which has always worked well.

  Went to Device Manager o and removed the video card adapter. Powered off and then attached the monitor directly with DVI and it started late! Drviers reinstalled and updated and now I have nice crisp clear video appears.

  Something of the support person should apparently have - insead has asked me to wipe the hard drive and restore the factory system, replace the cables, buy a new monitor... was even asked to leave VGA mode and do not use DVI!

  Thank you for your help, Dave, its good to know that you are around to help us.

• HP 251-a123w: DVI - D port not recognized

  I have a HP Desktop 251-a123w which was delivered with a 22uh HP monitor.  Only a VGA cable was included, but HP 22uh monitor has HDMI, VGA and DVI - D ports.  I use the system with the monitor connected to the VGA cable until Saturday.

  Saturday I shut down the computer and the 22uh HP connecting its port DVI - D port DVI - D on the computer using a DVI - D cable.  Then I connected an Acer X193w monitor is VGA port on the VGA port of the computer using a VGA cable.  I want to have a Setup dual monitor.  HP support for my model site indicates that both ports can be used at the same time.

  Well, my computer starts by using the Acer monitor to the VGA port but the HP 22uh simply displays a message "Not connected Signal Cable!".  Nothing I did make the HP 22uh start on the DVI - D port.

  I've updated the drivers, I rebooted the computer several times.  I started the computer with only the monitor 22uh HP connected through a DVI - D cable and still do not recognize the monitor.  I uninstalled the display adapter and then restarted, is yet to recognize the DVI - D port (or maybe that the monitor is not recognizing cable, I don't know).  I have the HP 22uh monitor turned off and restarted, still nothing.

  Any suggestions?

  OK, dug the manual out of the garbage, "Input Select option in the OSD menu.

  Had no experience previous selection of entry on a monitor...  Who reads the manual for a monitor? SMH

• The HP BIOS update seems to have caused havoc with my laptop HP G62

  After him have updated software for my PC BIOS of G2-244 HP laptop usb mouse doesn't work.  I checked Device Manager and all the USB ports seem to be defective with a "!" triangle icon next to them.  When I ask to check the drivers of these ports, the device manager tells me that the drivers are current and good.  Anyone else had problems with the recent update of the HP BiOS?

  I also tried to reinstall my old BiOS version (online successfully) but no change to the usb port is port problem

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).

• Dell XPS 12 Mini DisplayPort seems to have stopped working

  Hello

  My Mini DisplayPort seems to have stopped working. I can connect on the same monitor of the ultrabook even through the USB port. However, because I'm a geek of database I need up to 3 screens. So when I try and connect to my Mini DisplayPort monitor the screen resolution tab in the Control Panel recognizes the display. However, the actual display is empty. Mini DisplayPort has worked well for the last 8 months or so, but stopped working tonight.

  The external monitor is; -Samsung; SyncMaster 941BW/940BW\199BW, SyncMaster Magic CX915BW (Digital)

  Any help would be greatly appreciated.

  Kind regards

  Kieran.

  I replaced the cable and now it seems to work.

  Thank you

  Kieran.

• Second monitor not detected via the dvi - d port

  Hi I have a Hp slimline s5610y. Windows 7 64-bit. It is a new system with 3 ghz ram and more than 600 gaeremynck ram so I know that this is not a problem of performance, (duty handling system), I am looking to hook up two monitors, product sheet page on H.P. States that ports Vga and Dvi d may be used at the same time. I have the converter dvi-d/VGA, hooked to a monitor via the Vga port on a single computer (which doesn't work). The Vga port to vga works fine (the first monitor. I already check the easy as stuf "carrier dual monitor", unplug the monitor, update the latest driver for radeon 3000 and restart windows. I hooked two monitors before without any problem. Any ideas out there?

  Thank you

  Manny

  Hi again,

  If it is a dvi - d, you need a computer screens which have dvi - d.
  A graphics card with a dvi - i port also supports vga monitors.

  OK - page of your product (return i/o ports):
  http://support.HP.com/us-en/document/c02552467

  It is a true dvi - d - then Yes, you need a digital monitor with a dvi - d port.

  C.

• Since W10 is released, Firefox seems to have been sabotaged.

  Since W10 is released, Firefox seems to have been sabotaged "voluntarily."

  Repeatedly, I asks me to change my default on firefox browser, despite the fact that it is long established as such.
  It runs much more slowly, with a lot more mistakes.
  I now get apparently screen continuous updating, making almost impossible email screen freezes when it "thinks".
  I now get messages of error of pursuit "(firefox ne répond ne pas) '."

  Hope you can do some alternatives.
  D

  Firefox 40, scheduled to be released next week, will have many patches of compatibility for Windows 10. I hope that will address several issues that you are facing.

  Since you seem to be an "early adopter" type person, you want to try Firefox 40 in his last days of tests?

  Note: Some extensions is perhaps not compatible with Firefox 40, especially the toolbars now of security which tend to be updated simultaneously with or shortly after Firefox versions.

  The following procedure will not remove your settings; don't uninstall NOT Firefox, that does not need.

  (A) download a complete Installer for Firefox 40 'beta' of https://www.mozilla.org/firefox/beta/all/ in a convenient location. (Scroll down your preferred language).

  Note: to retain the use of your plugins installed, I suggest the 32-bit version.

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (D) to run the installation program that you downloaded in the #1. It should automatically connect to your existing settings.

  No improvement after this installation?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

  When the final version of Firefox 40 becomes available (approximately 11 August), I propose to install this beta because will be auto-updated to Firefox 41 shortly after and unless you like software testing, maybe it's a little more adventure you are looking for.

• The speaker on my iPhone seems to be blown out and suddenly the muffled sounds and very low quality.

  The speaker inside my iPhone seems to be blown out and smothered. The quality is low and seems to not be as strong as before. Are there ways to solve this problem or replace the speaker inside the phone?

  < object edited by host >

  Try troubleshooting help here > If you hear no sound or distorted sound of your iPhone, iPad or iPod touch speaker - Apple Support

  If nothing helps, check your warranty coverage > https://checkcoverage.apple.com

  The iPhone may need repair > repair - official Apple iPhone Support

• Some Excel files download but do not show associated with Excel or seem to have no file name extension.

  Some Excel files download but do not show associated with Excel or seem to have no file name extension. If I download these files using Internet Explorer, they open properly. I can add xls or xlsx file and it will open properly with Excel. If I select the file open the 'Open with' dialog box and I If select Excel, the file does not open at all... nothing happens and Excel does not open. The excel in the picture as an attachment file are those where I added the excel file name extension.

  Unfortunately, the way that Firefox gives the name of file is more literal and less improvisational than Internet Explorer, you may need to add this extension .xls or .xlsx yourself from time to time.

  If you want to do it in the shortest time, you can change the immediate download to ask you where to save the file, which also foresees the possibility to change the file name. If you want to try it, the setting is described here: start-up, homepage, tabs and download settings.

• Years, I used iPhoto to edit my images-Lighten/Darken, sharpness, contrast, highlights/shadows points. Now since I upgraded to OS x 10.11, pictures replaced iPhoto. Photos seems to have very little editing tools. What options now? Lightroom?

  For years, I used iPhoto to edit my image - sharpness, contrast, highlights/shadows, Lighten/Darken points. Since the update to OSX 10.11, iPhoto has disappeared, replaced by pictures, which seems to have very little editing tools. I am disgusted. What are the options should I now? A friend suggested using Adobe Lightroom.

  Use the Extensions:

  Read here: Edit your photos using third-party extensions in Photos for OS X - Apple support

  Search Photo extensions on the Mac App Store

• Boot Camp: This disc seems to have been divided by another utility. It must be erased before installing Windows.

  I have a SATA Western Digital to 6 TB drive on my Mac Pro 2012.  I thought "what better place to put a bootcamp partition?  But when I went to use the Boot Camp Assistant, I was greeted with this:

  Boot Camp: This disc seems to have been divided by another utility. It must be erased before installing Windows.

  

  I thought ' OK - I'll delete data... Use utility disk to erase the disk completely, and then try again.  After a few hours, I used... completely partitioned disk utility disk and tried again.

  Same message.

  It seems that for some reason I can erase completely and use the entire disk for Windows (blah) or should I use another drive or not Boot Camp at all.  Is there a problem with the size of the hard drive Boot Camp can support?  Any advice?

  Hello ElPapa,

  Thank you for using communities of Apple Support.

  I understand that you want to put a Boot Camp partition on your Western Digital HD connected to your Mac Pro. What is your boot drive? If this isn't the case, it could be part of your problem. According to the following article on installing Microsoft Windows using Boot Camp, it is said that you need "at least 55 GB of free disk space on your startup disk".

  How to install Windows using Boot Camp

  If you install it on your boot drive and still get this message, take a look at this article: Boot Camp: alert message Partition when you use Boot Camp Assistant

  Best regards.

• How can I create a smart folder. This option seems to have been deleted.

  In the past, I've created several smart folders and I find them very useful. Now I want to add another, but the option seems to have disappeared, because I don't see the Save button under the search bar in the library more.

  I'm on FF 27.0.1.

  Hello

  Please, see thisother thread:

  • questions/951511 #answer - 411536

  Thank you

• I did a lot of smart folders, but they seem to have disappeared, what to do?

  I did a lot of smart folders, but they seem to have disappeared, what to do?

  You may have accidentally hidden albums.  The library panel Inspector hid 'Show' and 'Hide' controls to the right of the titles of 'Albums', 'Projects', etc.  Move the cursor to the right of the title 'Albums' and look if the albums will be displayed, if you click 'Show '.

  

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file