Software does not open after installation on Windows 7

Similar Questions

• My Windows 7 does not open after installation of Windows 8 Preview Release

  I have a laptop HP Pavilion g6 2004 TX. I had WIndows 7 Home Basic Edition.

  I created a 23 GB partition on my hard drive and installed WIndows 8 Preview Release on that by starting to dvd.

  WIndows 8 works fine. It gives me the option to choose between windows 7 and Windows 8 at boot.

  When I choose windows 7, HP recovery manager opens and asks me to restore the OS to a previous restore point.

  If I allow it, he does and asks to restart. After the restart, yet once he asks me to choose between Windows 7 and 8 to start. If 7 selected even once, the HP Recovery Manager does the same thing again.

  I can't open Windows 7 now. What should I do? Should I start Windows 7 recovery discs? He'll do anything for Windows 8? Need help as soon as POSSIBLE. Thanks in advance.

  Hello:

  The recovery disks will reinstall W7, but will remove, create new partitions (primary and recovery), and format the drive.

  This means that your existing installation of W8 is cleared, as well as your current installation of W7 and the recovery partition.

  I would recommend if you want to keep windows 8, just wait until the license expires and recover your PC to its original state by using discs of recovery at this time.

  Paul

• Adobe Premiere Elements does not open after installation

  Hello

  
  I've written before last week. I bought Adobe Photoshop elements 11 and Adobe Premiere elements 11.

  I had a trial version of Photoshop elements 11 and with the code I could access the full version.

  
  However, Premiere Elements did not open after installation. I have a trial version, so I downloaded the full program. I went through the installation process and everything seemed ok, no error message. But when I tried to open Adobe Premiere Elements after you restart the computer, it did not open at all. Nothing happened.
  I uninstalled and reinstalled the program for a couple of times over and over again, but no result. Also tried to download the free trial first, and also it does not work. I checked my Quicktime and updated to the latest version.

  I use a Windows laptop: Asus Intel Core i5 - 2430M, 2.4 GHz
  I hope you can help me!

  Thank you!

  Inge

  Have you seen the answer you received in post http://forums.adobe.com/thread/1226832 your course from last week ?

• Lightroom cc 2015 does not open after installation today, 24/04/15

  Today, 24/04/15, downloaded and installed Lightroom cc 2015 on my machine WIN 7 Dell 8300 Desktop.  The icon appears on the desktop, but it does not open.  I find the .exe file and double clicked on it and it opens either.  The list of installed programs shows that Lightroom was installed today, but it does not open.  I am currently in Lightroom 5.x, Photoshop cc 2015 and they always start ok; they have been also updated this afternoon.  Anyone have the same experience and determine what needs to be done to correct the installation?

  Bob F

  Robert-

  Please try signing out and back in (different from the app) see this link:

  log in and log out of the desktop creative cloud application

  IF this does not help, please see option 2 at this link:
  Lightroom does not launch or closes automatically after the splash screen

  Kind regards

  Guinot

• Lightroom CC does not open after installation

  I have a subscription to the CC, and I just installed the new update of Lightroom CC.  It shows that it is installed and "up-to-date" in the CC window, but it does not open.  Do I need to uninstall first 5 Lightroom?

  See my response on today. This should work.

• BB10: My signed application does not open after Installation of device

  Hi guys,.

  as the title suggests, does not open my signed application.

  A few facts:

  • When I touch my application signed on the device icon, the screen shakes from left to right, as a sign that he can't open.
  • It works fine when I use the debugging token and charge of QNX Momentics IDE.
  • I use a program called DDPB to install my signed. BAR in the device.
  • I signed with the same signature and with the same program (DDPB) other applications and they open.

  Gosh, I just need to make it work so I can download it from AppWorld. And my client is in a hurry and he's angry.
  

   

  Any ideas on how to solve this problem?

   

  Thank you very much!

  "Q_DECL_EXPORT" is in front of your main function?

  main.cpp

  Q_DECL_EXPORT int main (int argc, char * argv)

  Recently point your SDK?

• ScanJet 4890: Scanjet 4890 software does not work after update of Windows 10

  After a few updates for Windows 10 Solutions Center software starts to open and close. It was working fine the week of December 13, 2015 with windows 10. Tried to reinstall and HP according to procedure but no luck. Is there a solution?

  ELP

  Hello

  Thank you for using the forum.

  Try this solution:

  > Enter "View installed updates" in the search bar of Windows. It will show you an option in Control Panel.

  > Click on the indicated option.

  > Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.

  > Click on Uninstall and work through all prompts.

  > Once uninstalled, I hope your problem will be solved.

  Take note of this notice from Microsoft:

  Summary

  Microsoft has published a notice of security for it professionals about vulnerabilities in Adobe Flash Player in the following web browsers:

  • Internet Explorer in Windows 8, Windows Server 2012, 8.1 to Windows, Windows Server R2 2012, 10 Windows and Windows 10 version 1511
  • Edge Microsoft Windows 10 and Windows 10 version 1511

  https://support.Microsoft.com/en-us/KB/3132372

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• hp photosmart 6515 software does not work after installation, click on the icons on the screen and nothing...

  I have a fairly (1 month) new HP Photosmart 6515e bought at Costco, replaced the ink installation cartridges with new ones at Costco and had to reinstall the software, but now it does not work. the icons are on the screen but when I click on the hand that resembles a printer, nothing happens, I have uninstalled/reinstalled several times nothing helps, have you tried the USB connection or Setup wireless, still no go, have an edition HP Pavilion p6267c running Windows 7 Professional 64-bit, 8 GB of ram all drivers updated. Help!

  Windows is the problem, I did a ton of googling and many people have the same problem with different printers, etc. I'm wasting my time here, please delete my profile, thank you.

• Vista system does not start after installation of windows update 10thFeb2010. Only start in safe mode. Windows Update does not open

  Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

  I use Windows Ultimate x 86.  I hope someone can help me!

  Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

• My Adobe Creative cloud does not open after installation.

  I tried to fix it myself for a night. Installation of creative cloud will load and after that it's over, he asks anything open. If I try to click on the Adobe CC on my desktop, even as an administrator, it won't make any difference. Help, please! I need it for College. How can I make it work?

  EDIT: I tried to uninstall with add or remove programs, CCleaner and even the cleaning of Adobe tool. CCleaner and add or remove programs do nothing if I click on uninstall, and Adobe Cleaner said he has been uninstalled successfully, but still does nothing. It worked on my older laptop.

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

• EXE files created with aggregator does not work after installation of Windows update KB3132372

  outputs .exe created using Adobe aggregator only white screen after that the latest patch for Flash Player has been installed. One of our sites publishes several of these courses next week. They are working on a plan B, where they will release output .swf aggregated, but it's not ideal. No work around available?

  This is the second time that the Adobe developers make this mistake.

  There are 4 years, what a flash update made a black screen to all EXE Captivate files. At the time the patch is a patch to Captivate and republish all courses after the patch. At the time my company was in its infancy and had very few customers and has sold only a few products. Today, we delivered thousands of products to paying customers. If the fix is proving to be the same it would be our company cost very expensive and probably paralyze our business.

  It is unacceptable that a company such as Adobe provides an update to Flash without testing on their platforms. I'm not sure how many of you are in the same situation as us, but if you are please feel free to contact me.

  I would like to start sending my clients email complaints and claims directly to someone who cared about Adobe, but this only works if a person didn't care.

  THIS PROBLEM MUST BE RESOLVED AS SOON AS POSSIBLE AND NOT ONLY NOT DOING HALF A * JOB LIKE LAST TIME.

• G4-1303AU of the HP Pavilion: HP my laptop works does not properly after installation of window 7ultimate 64-bit

  This laptop is provided by UP Govt (INDIA). I installed windows ultimate 64-bit, 2 days ago and installed all the drivers. But there are two pilots who is errors. These are some

  1)PCI device- ERROR IS- the drivers for this device are not installed. (Code 28)

  Hardware ID is

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  2)Ethernet Controller- ERROR IS - the drivers for this device are not installed. (Code 28)

  Hardware ID is

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  My main problem is this laptop is hangig too permanently. I do not know what is the exact reason and how do I... Its heating not so it's null chance of warming... I want to get rid of this problem of hanging. Please give me link to download the real drivers and the solution for this problem of hanging... As it was not hangig earlier on Windows 7 Home Basic (provided by Hp)

  Hello:

  Here are links to the drivers you need...

  PCI\VEN_10EC & DEV_5209:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

  PCI\VEN_10EC & DEV_8136:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

  The only suggestion I can offer regarding the laptop works is not so good is to download and install the drivers for the chipset amd from the link below and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• HP Solutions Center's does not open after Installation

  My used HP OfficeJet 6500 appeared to have successfully installed using the complete driver on the HP download site.  However, when I click on the HP Solution Center, I receive a message that the installation was incomplete and to insert the cd that came with the unit.  How can I get the Center to work without the CD?

  My first recommendation is to try to start printing and scanning doctor.  It is available here:

  www.HP.com/go/Tools

  Let me know how it goes.

• Photoshop does not open after installation.

  I installed the trial version of the latest version of PS and when I try to open it it gives me the error message.

  

  Help, please.

  Concerning

  shilove, Allows to try the solutions mentioned in the article below and check if that helps.

  CC of Photoshop (2014) fails to start (0xc000007b)

  In addition, may I know the operating system you want to install PS CC 2014?

  Restart the computer and try again.

  ~ David

• the FW program does not open after installation of the trial version

  Hello

  I have registered the FW trial version yesterday and I can't get promotion launch the walk.

  Thank you for m ' indicate how to do emergency.

  Kind regards.

  Isabelle

  Please visit:https://helpx.adobe.com/fireworks/kb/error-fireworks-cannot-run-parameter.html

  Error "unable to launch... internal error...". "at the launch of Fireworks CS4

  I hope this helps.

  Concerning

  Megha Rawat