Software installation Oracle & DB creation with ADMIN No. rights!

Similar Questions

• older software installation

  Essentials of Maxim DL software is used with my cam of deep sky of the telescope. Almost set up a message that the installation wizard interrupted the installation. Worked fine with the old laptop with XP. I need to install so that I can return to my fav jessy to collect pictures of space. Orion starshoot download for 64-bit drivers cam does not work or the other.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe

  O run as admin.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.

  See you soon.

  Mick Murphy - Microsoft partner

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• M1536 HP software installation disappears

  When you install the full or base of print and Scan software on a 64-bit Windows 7 installation specifications disappears into the background (according to Task Manager, it is still ongoing).

  The print spooler service is running, and I tried to restart repeatedly. I also tried as different users (all with admin rights).

  I would appreciate help!

  Let's start with a clean slate. We will move the manual how to remove and reinstall the printer.

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• where can I get the software for oracle database 11g RAC installion

  pls can someone tell me where to download the installation software for oracle database 11g RAC with Yes which has the option of installing RAC database on, I the installation of database 11g software, but it does not include the installation of database RAC inside option, I heard someone say that the installer of oracle database 11g in oracle's Web site is not used to install a RAC database is it true? If that's how to make one that installs the RAC DATABASE.

  Download page:
  http://www.Oracle.com/technology/software/products/database/Oracle11g/111060_linuxsoft.html

  -Oracle Database 11 g Release 1 (11.1.0.6.0) for Linux x 86
  linux_11gR1_database_1013.zip (1,844,527,800 bytes) (cksum - 1044354138)

  -Oracle Clusterware 11 g Release 1 (11.1.0.6.0) for Linux x 86
  linux_x86_11gR1_clusterware.zip (244,660,141 bytes) (cksum - 820583335)

  Maybe you need to download is: Clusterware Oracle 11 g

  Document: Oracle® database 2 day + Real Application Clusters guide 11 g Release 1 (11.1)
  http://download.Oracle.com/docs/CD/B28359_01/RAC.111/b28252/TOC.htm

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• I use software that is not compatible with FF 4. I am able to download a previous version and delete FF4?

  I have a software that is not compatible with FF4. I would like to revert to a previous version of FF. Perhaps 3.x. Is it possible and how can I do this if it is. It will probably be a short-term situation until the software is updated for compatibility.

  To return to the previous secure version which is 3.6.17, follow these steps:

  1. Go to Download Firefox v3.6.17 and upload it to the office.
  2. Then go to add/remove programs, scroll down to "Mozilla Firefox" and delete it, choosing to keep your bookmarks, customizations, etc. (don't tick the box).
  3. Reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the installation file downloaded previously on the desktop.

  Your bookmarks, etc., customizations are stored in a different location and will become available to you even once you complete the installation.

  After completing the installation, go to the Plugins check page and update if necessary.

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Photosmart Premium C410: C410 Software Installation fails for not having not supported USB, Win7 Pro

  I just got a laptop HP ProBook G3 450 with Windows 7 Pro 64 bit. I'm unable to install the Photosmart C410 series software and it fails when checking the system requirements, saying the USB hardware and necessary drivers are not present.  I tried with and without a USB cable installed and also tried to disable the security firewall. It fails for the same when USB problem only connected via WiFi. The discoveries of software troubleshooting HP Print and Scan doctor that the software is not fully installed, for example, without help.  I can connect to the printer and print a test page using my WiFi network using a web browser, and I managed to install it on two other portable Win7 in the past.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• HP laserjet more than 8600: can I get OCR software for a more 8600 with a mac?

  can I get OCR software for a more 8600 with a mac?

  If so, how?

  Hello

  OCR software, I included in the HP scanning software.

  In the Applications folder, find the Hewlett-Packard folder and launch the HP scanning software.

  After the analysis, you can select RTF or TXT files that save by processing OCR scanning.

  If you do not have the HP scanning software installed, remember to install the following software by checking the option of scanning HP during the installation:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-125213-3&cc=us&DLC=en&LC=en&OS=4159&product=4323648&sw_lang=

  Kind regards

  Shlomi

• For microsoft office 3,1,5 avery Wizard software installation cannot find Microsoft Word

  Original title: the software installation wizard for microsoft office 3,1,5 avery will install on vista home basic. error comes up cannot find microsoft word. what I'm doing.

  as I mentioned above, I can not install avery Office Assistant 3,1,5 will not install with Vista Home Basic. error comes up cannot find microsoft word. What should I do?

   
  Hello
   
  What Microsoft Office version do you have installed?
  
  You can follow the methods mentioned in the article in order to help solve the problem.
   
  Avery Wizard Setup cannot locate word
  http://support.Microsoft.com/kb/288387
   
  Hope this helps
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• THE PRINTER SOFTWARE INSTALLATION FAILURE

  I'm trying to install the software to print HP C4480 on my HP Compaq nc6220 laptop.

  I used the installation wizard and success with respect to extraction.

  The screen has the small CD running and the HP disc install screen showing.

  Then I get an error message...

  SETUP CANNOT ACCESS THE REGISTRY KEY

  HKEY_LOCAL_MACHINE/SYSTEM

  Anyone can help you with the answer to the problem, the printer ran on this laptop before.

  Hello BRISLY,

  Welcome to the Forums of HP Support!

  I understand you are trying to install the computer Compaq HP C4480, I found some hopefully useful troubleshooting you can try.

  You could try a suggestion to pass the mistake proposed by a member of community twoslick2 on this thread: registry key: HKEY_LOCAL_MACHINE\SYSTEM. His suggestion is to hold SHIFT & Control on the on board key and click Cancel in the error. This has allowed many members of the community the ability to install.

  If this does not work because you try to run the Microsoft Fixit. It is a great application of Microsoft and has worked for many problems in the past.

  If those top-level suggestions fail to resolve, answer comes back with the results and the version of Windows installed on the computer.

• Software installation problem

  I have a Windows Vista PC, I don't remember the problems with regarding the purchased software installation.  The last two software products, TurboTax 2009 Deluxe and Photo Explosion Deluxe not installing not.
  I've actually worked with the assistance of TurboTax and was still unable to get the software installed.  Photo Explosion is just sitting there.  When I insert the CD, it does not automatically start, and I have to run it through Run or enter my computer and selecting the Setup program.  I tried to play with the functions of security, thinking they have stop installation but at this stage I am not clear on how best to proceed.
  Any directive or suggested efforts would be appreciated.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I make a new installation on new hardware with Windows 8 Pro OEM?

  But seriously, I have a new MB that I need to use as there is a problem with my Chipet a PCB there is some problem with power. I have not really but it's a mess now of working with and I bought a copy of Windows 8 pro OEM System builder and I made sure that if reason I could use the liscence to win 8 OEm on new hardware store and this Orginal Statemant of Microsoft saying it's fine as long as it's only on a PC. Although I found many threads say otherwise and win 8 OEM is not transferable, as are all the Windows OEM. So I ask you once again so I can have a PC is able to install on new hardware?

  Original title: fishing trolling warn... Can I make a new installation on new hardware with Windows 8 Pro OEM?

  Windows 8 Pro OEM System Builder has rights of transfer, then Yes, you can move it to a new computer or the motherboard.

  http://personaluselicense.windows.com/en-US/default.aspx,

  "Can I transfer the software to another computer or user?

  You can transfer the software to another computer owned by you. (You can also transfer the software (as well as the license) to a computer that belonged to someone else if one) you are the first user under the software license and b) of the new user accepts the terms of this agreement. To make a transfer, you must transfer the original media, the certificate of authenticity, the product key and the proof of purchase directly to the other person, without keeping all copies of the software. You can use the backup copy that we do or the media the software provided on transfer the software. Whenever you transfer the software to a new computer, you must remove the software from the previous computer. You can not transfer the software to share licenses between computers. You can transfer the Get Genuine Windows, Pack Pro or Media Center Pack software only in combination with the licensed computer. »

• software installation 12 items on the second machine

  I have 12 elements installed on the desktop but now the purchase of a laptop computer and want to install on it.  My software is written with Adobe.  How do I do that?

  Download the installation files, install, activate with your serial number.  If you need a download...

  PES 10, 11, 12, 13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  PE 10, 11, 12, 13 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html