Solo script after synchronization

Similar Questions

• IPod Classic 160g shows no music after synchronization.

  I tried reformatting and restoring. Sometimes I can get a few albums will appear on the ipod, mainly purchased itunes music. Almost none of my CD from my library will not work. It's maybe a hard disk problem. I just want to have some opinion or if someone could have the same question. It started after making the mistake of syncing with itunes after the last update. Forgive me for wanting to add new music. Here are my stats hard drive...

  Retracts: 9

  Reallocation: 16376

  Sectors pending: 0

  PowerOn hours: 143

  Start/stop: 47707

  Temp: current 29

  Temp: Min 5 c

  Temp: Max 56 c

  Do not know your stats, but it is not specifically a drive problem hard if your iTunes Store purchased songs to the iPod and your CD songs imported synchronization are not.  iTunes doesn't care of the original source when it syncs the songs.

  Do you use the method to Manage manual (drag and drop songs on iPod in iTunes) or Auto Sync (setting synchronization music )?  You get an error message after synchronization?

  Find one of the songs that will not sync to your iTunes library.  Make a right click on it and read the information.  Tab Info to file window, browse to the location.  It shows a file path to its location on your disk, or does it mean something else there, like iCloud.  Depending on the configuration of your iTunes, it is possible for you to access your songs streaming from Apple servers ("iCloud").  But to synchronize the songs on your iPod, your files must be stored locally on your disk.

  If this isn't the problem and/or your iPod hard drive is defective, you can consider to replace flash storage, in the form of widely available card compact flash or a card SDXC, on an adapter.  The 5th generation and later "classic" iPods, this website contains relevant information.

  https://www.iFlash.xyz/

• Change the order of songs in playlists on iPad not reflected on computer after synchronization

  I note that changing the order of songs in playlists on iPad is not on the computer after synchronization, but change the order on the computer is reflected on the iPad after synchronization. Is this a bug or a feature?

  It's normal.  Your library is always the master, and what you have on your device is always secondary.  The only thing your iPad can change in your library's ribs song game counties and new playlists (not edited) created on the iPad.

• Running the logon script after AnyConnect VPN connection

  Is it possible (such as the Launcher on the IPSec client) to run a login script after establishing a VPN connection? When a user connects to the VPN client AnyConnect I need to be able run a login script to map drives. I looked the ASDM, but see anywhere that it seems that this would be configured. I thought I would check to make sure I'm not missing something.

  We lack ASA IOS v8.2 (2), ASDM 6.2 (5).

  Thank you.

  You can learn more about the AnyConnect script capabilities on the link below...

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect25/Administration/Guide/ac03features.html#wp1068902

• SQL more how to stop script after the exception of the DDL

  Hello

  I have script .sql, which I managed by SQL * more.

  Some migration of data and database structure changes were made in the script.

  So, I use a lot of distinct calls:

  @script_name.sql

  @script_name_1.sql

  @script_name_2.sql

  ...

  Some of the scripts contains DDL as create table or column.

  contains some declare blocks (DML).

  Is it possible to stop the script after an exception has occurred?

  Thank you, Olga.

  Hi, Olga.

  You can use the SQL * more order

  WHENEVER SQLERROR EXIT

  to tell SQL * more to stop the execution of orders and immediately disconnect after any exception SQL is triggered.

  I don't know of anyway to stay connected, but to stop script execution, after an error.

• Badge of the App Store is not extinguished after synchronization

  Because of the way iTunes/iPhone now manages updates, I have been updated on the phone and iTunes before syncing.

  Today, I tried to update an application in iTunes (but not on the phone) and then perform synchronization to avoid two downloads.

  After syncing, I went on the phone and the app has changed to be opened, but the App Store badge has not disappeared. The phone always shows that the app is available for the update (did not move, down to the section update), but shows that the application is open.

  I turned the phone off and opened it to new, but has not removed the badge. App Store app has no option to disable the badges in the preferences. I did a second synchronization without change. In the preferences, automatic updates has always turned off. I turned on and off again without change.

  The app has been deleted on the phone but it still showed open in iTunes. I deleted in iTunes, then reinstalled the app on the phone with synchronization. The badge is still there and shows is open, but still shows in the section update available. I did remove/reinstall 2 times more.

  I'm going back to update an application on the phone and iTunes before syncing but the need to get the phone with a demonstrated that it app has been updated and turn off the badge!

  A 'solution' just happened.

  After removing the application on both the phone and iTunes, the badge has remained.

  However, a new update for another application came and the badge has indicated that an update. After updating to the new app on the phone, the badge has disappeared.

  Assumes that the solution is to wait for a new app update remove the badge.

  Very frustrating to spend so much time on one kind of bug.

  I won't let NO iTunes update apps for the phone through the sync again!

• iPod classic 160 GB says no music after synchronization

  I have an old iPod classic 160 GB that has worked well for years. But suddenly, last week, while he was trying to put in new music (right now I have about 18 000 songs, more or less) he began to have problems with synchronization. After having tried in different ways (and after the restoration, with utility disk and with iTunes), I managed to synchronize all the music. However, it is very frustrating that after all this process my iPod displays "no music" in there. I'm desperate and I need advice because I really want to get it back and listen to music again.

  iPod classic 160 gb / Mac OS X (10.13) / last iTunes (12.3)

  Greetings!

  After a restore, iTunes current assigned to use the parameter manually manage music and videos by default (no Auto Sync).  Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click music.  Settings of music from the iPod screen is shown at right.

  Is currently checked the checkbox to Sync music ?  If your library complete iTunes music fits on the iPod, is the ability to synchronize the selected entire music library ?

• Training of W450 not appearing is not on the website after synchronization via USB (4.55.97)

  Hello guys

  Last night I updated my W450 8 GB US yesterday to 4.55.97 through my Mac at home - he crossed without incident. Today I took for a race and then wanted to synchronize the workout on the site via the USB connected to my PC at work. The Motocast software did his thing without any error. Then I went to the site to view detailed information about the race, but the training was not there (I can still see it on the camera itself however).

  This process tends to work for me before, why it would not work anymore?

  There are a few problems of complications:

  (1) update 4.55.97

  (2) it was the first time I ran with my new Garmin HR strap

  (3) synchronization via USB via the PC at work, while I use Wifi at home

  (4) my last training always in the Web of W450 (account LahmeEnte79) site is a workout elliptical incompatible ("workout contains all the raw data"), that I can't delete somehow.

  Is there a way to define a workout on the device as "unsynchronized", so we can download it again?

  PS my boyfriend jogging today ordered a Garmin EN 910 last week; He regretted that powerfully after seeing the W450 :-)

  See you soon,.

  Michael

  Problem solved thanks to Matt: turns out the problem was the date being set to one day earlier. After recording a workout and wait 24 hours, they have appeared on the site W450 :-)

• Songs deleted from the iTunes library still show on my device after synchronization

  I updated my iTunes library and remove several songs.

  after syncing my iPhone 5, deleted items still appear on my phone

  want to do the same thing at mynipad, but I'm nervous about synchronization.

  How can I make sure that the d delet songs are deleted from my device and make sure that all the other managed elements are correctly synchronized?

  Thank you

  The following steps should solve the problems around the synchronization, assuming that all the content you want in your library.

  (If it isn't see recover your iTunes from your iPod or an iOS device)

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  NB. A feature introduced with iOS 9 called thinning or slicing app app allows each device to download just the code and resources required by this device, resulting in smaller downloads and a better use of the storage on the device. Therefore the device is no longer the universal version of the application that can be installed on any device to transfer applications is no longer supported. I hope that Apple will bring some changes to how it works, but in the meantime, you can download past purchases from iTunes or activate the automatic shopping app downloads to ensure that iTunes has always the apps you want on your device. As long as you make sure that all of the apps are present and updates in iTunes before you attempt a restore there should be no loss of data. I cannot confirm, but it seems a way to recent update all data are restored and apps that are not in the library are waiting to download from the iTunes Store over Wi - Fi, in a similar way to the restoration of the iCloud way works.

  TT2

• Problem of unknown Script after the installation of the software Reservo

  After you install the software reservo, I turned my computer off and when I turned back the script was unrecognizable-all the squares and circles so I can't anything with the computer now - help

  You never gave us the correct name for this program so far.

  Regservo is a registry cleaner, that you should never use

  You must contact the manufacturer of the program, Regservo, for assistance.

  You will need to support your problem in your own words that we cannot see your computer screen to say what the problem.

  Or you can reinstall the operating system, BUT which will result in the loss of all data (photos, documents, etc.)

  See you soon.

• Del script after reboot?

  I have two annoying problems with my Vaio desktop computer I would like to ask for support or someone competent in the community.

  one is the power options; something seems to block to turn on the screen saver and "standby" mode.  Even if it worked when I got this VPCL2231FX now it will not come "sleep" or screen saver.  I keep it clean of spyware and viruses.

  The next most confusing one and this could be the cause that it is slow, and for crash programs are the following message, titled DelSelfPatch.vbs, every time that I reboot.  It is pasted below.  I don't know how to get rid of it.

  Set args = WScript.Arguments

  If args. Count > 0 then
  ' MsgBox args (0)

  Set ws = CreateObject ("Wscript.Shell")
  Command = "cmd /c rd /s /q % SystemDrive%\Update\" & Chr (34) & args (0) & Chr (34)
  WS. Run command, vbhide
  'MsgBox command.

  end if

  Set ws = CreateObject ("Wscript.Shell")
  Command = "schtasks.exe/delete /TN""Sony Corporation\VAIO Care\DelSelfPatch" "" / f ""
  WS. Run command, vbhide
  'MsgBox command.

  Whitetexas:

  This script runs to remove files from the PC update VAIO Update has updated itself to the latest version online.  It should not appear on your screen and it indicates something wrong with the VAIO Care.  To resolve this issue, follow these steps:

  • Open Control Panel and go to programs and features
  • Uninstall VAIO Care from the PC
  • Reset
  • Open your browser at esupport.sony.com and enter your model number, and then click OK
  • Your specific model support page, click on to the tab software and drivers
  • Expand the category of Applications Sony, then download and install the original version of VAIO Care (release date: 29/04/2011)
  • After you install the original VAIO Care software, please download and install the VAIO Care updated 3 available to esupport

  This should take care of the issue of VAIO Care.  It is very unlikely that VAIO Care is the cause of the problems with the display in standby or sleep.  After trying the above, let us know the status of the PC, and we will discuss the steps for your other question.

• Where can I find my address book after synchronization to outlook

  Hi guys, I'm done synchronization according to the following procedures:

  1. Start button - on your computer there a big button in the lower left corner of the screen.  Until it clicks.

  2. now, you will see an entry indicating "all programs."  Until it clicks.

  3 search for a folder labeled "Palm".  Until it clicks.

  4. find an entry labeled "PIM Sync Conduit".  Until it clicks.

  5. Select "synchronize with Outlook.  Until it clicks.

  HotSync.

  The issue is that I can't find the contact information document after successful synchronization whe I start my outlook program. Where can I find it?

  Thank you.

  I solved this problem.

  I started the program outlook before syncing.

• EEM Applet does not fire TCL script after expiration of the countdown

  We use currently EEM Applet below than securities has BGP route and if this path fails, it starts a countdown of 45 min, once the countdown expires, the router reloads. If the BGP route restores it will remove the countdown applet.

  I'm trying to change this applet to reproduce the same type of behavior, but instead to recharge after 45 minutes, I am changing the cell parameters via Script TCL or other means besides.

  Is this possible? Can someone direct me how to proceed?

  Cisco 1941 Version 15.4 (3) M2

  event handler applet track down
  Description "this applet will add the countdown applet when BGP 10.66.66.66 road goes down."
  Event track 10 down state
  command action 1.0 cli 'enable '.
  Action 2.0 cli command "config t.
  Action 3.0 cli command "event manager applet countdown."
  action 3.1 cli command "description This cmdlet is the countdown and will cause the router reload after 2700 seconds if BGP route is always down.
  Action 3.2 cli command "event timer countdown 2700".
  action 3.3 cli command "reload action 1.0.
  Action 4.0 cli command "end".
  command action 4.1 cli 'enable '.
  Action 4.2 cli command "wr mem".
  Event Manager applet track-up
  Description "this cmdlet will delete the countdown applet when restores BGP route to 10.66.66.66.
  Event State track 10 upwards
  command action 1.0 cli 'enable '.
  Action 2.0 cli command "config t.
  action 3.0 cli command "no event manager applet countdown."
  Action 4.0 cli command "end".
  !

  This is the applet changed, with that I have had the most success. The issue I'm running into is, sound without waiting 60 seconds (for testing I reduced to 1 minute) to run the tcl script. From my limited understanding, I discovered that, after the countdown event - the applet requires an action immediately after but does not accept a command like 'tclsh Cell.tcl' cli as 'action '. »

  event handler applet track down
  Event track 10 down state
  command action 1.0 cli 'enable '.
  Action 1.1, «config t» cli command
  Action 1.3 cli command "event manager applet countdown."
  action 1.4 cli command 'event timer countdown 30 '.
  action 1.5 cli command "action 1.0 wait 30.
  Action 1.6 cli command "end".
  Action 1.7 cli command "tclsh Cell.tcl.
  Event Manager applet track-up
  Event State track 10 upwards
  command action 1.0 cli 'enable '.
  Action 2.0 cli command "config t.
  action 3.0 cli command "no event manager applet countdown."
  Action 4.0 cli command "end".

  It is the TCL script that I use to run cellular changes.

  tclsh
  puts [open "flash: Cell.tcl' w +] {}
  ios_config "interface 1/0/0" "shut".
  ios_config "0/1/0 lte tech gsm cell".
  ios_config "interface 1/0/0" 'no shut '.
  After 10000
  ios_config "interface 1/0/0" "shut".
  ios_config exec 'cell auto 0/1/0 lte tech '.
  ios_config "interface 1/0/0" 'no shut '.
  }
  tclquit

  Thank you
  Robert

  These cmdlets will not accomplish what you want.  I also recommend never call EEM tclsh.  You don't need to do.  Use EEM MCI in native mode, or in your case, just use pure applets.  Take a look at https://supportforums.cisco.com/document/12723951/how-introduce-large-de... .  If you follow this example and put your config CLI commands in the countdown applet, you will be able to achieve what you want.

• Animate - problem with the duplication of scripts after loop

  Hi all

  I have a problem with button simple script to the first frame. All right when the timeline is playing for the first time. After that when timeline loops and stops again to 0 frame button script is fireing twice, when it performs a loop twice is fireing three times etc...

  Here is my script:

  This.Stop ();

  exportRoot.mc_cta.cursor = "pointer";

  This.mc_cta.on ("click", clickFunc.bind (this));

  function clickFunc() {}

  Console.log ("clicked");

  EB.userActionCounter ("clicked");

  exportRoot.gotoAndPlay (1);

  }

  Anyone any ideas? Where I'm wrong?

  Thank you!

  Kris

  As an alternative to creating multiple variables, you can also work around this problem by simply checking if the listener already exists:

  If (! this.mc_cta.hasEventListener ("click")) {}

  This.mc_cta.on ("click", clickFunc);

  }

  Moreover, you don't need bind() when you use on(). It automatically binds the event handler to the local scope.

  EaselJS v0.8.2 API Documentation: EventDispatcher

• control real time apply log on the database after synchronization

  Hi all
  
  I want to check the timestamp of applied newspapers archived on stanby database. How should I check that?
  
  My dataguard link was broken for some time, and during this time, many transactions happened on the primary database. Now, when the link came synchronization has happened in a few hours and ultimatly transport and app gal has become 0. But now I want to check real time taken for tranporting newspapers and apply them on the standby database. Is there a way I could do it easily...
  
  Thank you

  This script written by Yousef Rifai, I found here http://www.dba-village.com/village/dvp_forum.OpenThread?ThreadIdA=34772&DestinationA=RSS could be just what you need (executed on the standby database):

  worm off Set

  ALTER session set nls_date_format = 'dd-MON-yy hh24:mi:ss.

  /

  Select app_thread, seq_app, tm_applied,

  NVL (seq_rcvd, seq_app) seq_rcvd, nvl (tm_rcvd, tm_applied) tm_rcvd

  Of

  (select the sequence # seq_app, FIRST_TIME tm_applied, thread # app_thread)

  v $ archived_log in case of application = 'YES '.

  and (first_time, thread #) in)

  SELECT max (FIRST_TIME), thread #.

  v $ archived_log in case of application = 'YES '.

  Thread group #)

  ),

  (select the sequence # seq_rcvd, FIRST_TIME tm_rcvd, thread # rcvd_thread)

  v $ archived_log in case of application = 'NO '.

  and (first_time, thread #) in)

  SELECT max (FIRST_TIME), thread #.

  v $ archived_log in case of application = 'NO '.

  Thread group #)

  )

  where rcvd_thread (+) = app_thread

  /

  Best regards
  Robert
  http://robertvsoracle.blogspot.com