Training of W450 not appearing is not on the website after synchronization via USB (4.55.97)

Similar Questions

• Computer does not recognize the phone when connected via USB

  original title: usb recogonozation

  I want to connect my phone to my pc via the usb port but its upcoming Dungeon with an error stating that my device has mafunctioned or he stopped window. can someone pls tell me what to do? Thank you very much

  As a first step, check for compatibility with Windows 7 at http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx and on the site of the manufacturer of phone support.

• Change the order of songs in playlists on iPad not reflected on computer after synchronization

  I note that changing the order of songs in playlists on iPad is not on the computer after synchronization, but change the order on the computer is reflected on the iPad after synchronization. Is this a bug or a feature?

  It's normal.  Your library is always the master, and what you have on your device is always secondary.  The only thing your iPad can change in your library's ribs song game counties and new playlists (not edited) created on the iPad.

• Entry number of HTML does not accept the figures after the decimal point

  I use html5 number entry type. But do not accept the figures after the decimal point. Any suggestion welcome. Thank you

  The below HTML syntax works with the last update BB10.

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• Bridge does not refresh the thumbnails after changes in ACR.

  Bridge does not refresh the thumbnails after changes in ACR. Cultures made in ACR do not show more. I think it started after new ACR update. I have the last bridge and ACR and Photoshop.

  I thought about it. I have reset the settings of the bridge by pressing Command-Option-shift and then started bridge on my Mac. I lost my sight, I got but should display what I want to see again. But it solved the problem of the bridge not updated after modified ACR.

• can not detect the iphone after upgrading 12.5.1.21

  Set to update to the latest version of itunes (12.5.1.21) and now itunes does not detect my iphone.  tried to remove the lockdown folder. tried to restart all devices.

  Windows 10 with all updates installed. Someone at - it suggestions?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the alternate build Download iTunes for Windows (64-bit-for older video cards) , which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back 12.5.1.21 to 12.4.3.1 or 12.4.2.4, for example, then you will also need to restore the database of the library using the method described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• USB plays is not in the car after that put 9.3.4 at level

  I have an IPhone 6 and own a 2010 ford fiesta.

  After upgrading to IOS 9,34 I can't read podcasts or music through the car radio with USB cable, radio do not even recognize the phone is plugged in, although it will charge the phone and play via Bluetooth. and all the phone features work very well.

  It worked fine before the upgrade and the desire to return to the use of usb cable because it it allows to use the steering wheel radio controls.

  Ford blame Apple an Apple accuses ford. I had updated the firmware made by ford dealers.

  seems whenever apple do a update it fucks things up

  Sometimes an iOS update breaks compatibility and you will have to wait for an iOS update or a firmware update for the system of ether.

  However, try the following:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset the car.

  -Go to the support site for Ford and see if they know anything or if a firmware update is available for your car

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• L50-B-11J satellite does not recognize the HARD drive connected by USB 3.0

  Hello

  I recently bought a new laptop and install a new legal copy of windows pro 8.1.

  The problem that arises is actually a USB 3.0 port.
  Also, I have a drive external hard support standard USB 2.0 and 3.0.

  When I plug-in the hard drive into a USB 2.0 or any USB 3.0 port (two port supports USB 3.0 is disabled in the BIOS) fine, hard drive is recognized and I can access.

  But, when I plug-in the hard disk into a USB 3.0 port (two port supports USB 3.0 is active in the BIOS) Windows does not recognize it and I can't access it.

  The hard disk led flashes, so it has the power, but does not appear in the devices or Device Manager.
  My opinion is that the problem may be with the drivers for USB, but Toshiba is supported for driver for USB 3.0 for Windows 8.1.

  Then can someone suggest me what to do?

  Laptop: Satellite L50-B-11J
  USB ports: 1xUSB 2.0 port, 2xUSB 3.0 port
  Operating system: Windows Pro 8.1
  USB 3.0 driver: Intel (r) USB 3.0 eXtensible Host Control - 0100 (Microsoft)
  External hard drive: support USB 2.0 and USB 3.0 standard

  Intel USB 3.0 driver is part of the 8.1 Windows System... This is not supplied by Toshiba.

  Windows 7 contains no such USB 3.0 driver and so you can download driver Intel USB 3.0 page of the Toshiba driver as well as the Intel download site.

  By the way: try to disable the functionality of sleep & Charge and check how the HARD drive would work.

• HP 10 more 2201RA not recognized under windows 7 connected via usb

  As the title says. Receive connect the tablet to my computer via the USB port nothing happens. The device is not displayed. I followed the instructions in the troubleshooting section (Manager of peripherals and USB Root Hub etc.).

  The SDA device appear the first time that it has been connected, last night. However this morning... nothing.

  After using the connection to synchronize from the MyDocs toGO application, I unplugged the unit. I do not however the disassemble everything first.

  Thanks for the responses...

  I went with... done AirDroid work, works great and is wireless.

  See you soon

• ReadyBoost Windows 7 Pro 64 bit works only not with the reader flash 32 GB USB high speed...

  Hello

  I did what I could find in support.microsoft.com search/read them all using ReadyBoost on my Windows 7 Professional 64 - bit, because he seemed much more cost-effective to install a properly sized USB key from the bombings of hundreds of dollars to replace and modernize the planks of installed RAM, I, 4x2Gb @ 1066

  My basic material is:

  Intel i7 920 CPU using Gigabyte EX58 - UD3R-MOBO with 8 GB of RAM installed 1066.

  According to the info I've read ReadyBoost, the ratio is 4:1 for the size of the Flash drive compared to installed RAM or, in my case, a 32 GB USB device.

  I had the OCZ Rally2 32 GB because it tested faster about 30 GB Read and 5 to 10 MB write.

  When I go to activate the USB 32 GB for ReadyBoost flash drive, I get the "impossible... to use this device to ReadyBoost...". "error message.

  TWO QUESTIONS:

  1 knowing that my USB 32 GB current is at a speed of 31 GB read/6-10 MB write and can be replaced if necessary:

  a. y at - it a necessary range of recommended read/write speed?

  2. further, saying: the range of tested USB disk read/write speed are correct or I will get a correct drive 32 GB and with 8 GB of RAM currently installed.

  b is it? or what is the advantage in any computer processing speed using a 32 Gb USB flash drive when it is 8 GB of RAM installed (knowing that a replacement/upgrade RAM is off-budget for the foreseeable future)?

  Finally, I pass first OCZ support but received no conclusive answers.

  1st answer to yesterday 20:11

  Win7 is limited to 32 GB size by device for ReadyBoost. I've seen this problem before when the USB key is at the maximum limit. Never seen a work around so.

  AND, more interesting for me, 2nd answer:
  Today 02:37

  Few people I know with this problem that I've never heard of a solution. I don't know anyone who devoted a lot of effort as with 8 GB of memory system is not a necessity for ReadyBoost so they just moved.

  NOTE: The support guess I are underutilizing the 8 GB of RAM installed. In fact, due to the needs work I will typically have anywhere for applications and utilities operating at 20-35 someone time, using 4-6 GB of RAM at peak use.
  Ideas?  Suggestions?
  Thank you.
  John

  Hi John,.

  A flash drive may appear to meet the requirements, but Windows may detects it not as compatible ReadyBoost if its rated speed measures sequential and random performance and performance is not always quick on the set of the flash player.

  Look for a note from the manufacturer that the flash player is Compatible Windows ReadyBoost. Not all manufacturers of this list on their packaging.

  You can check with another flash drive

  Answering your questions

  a. speed for Windows ReadyBoost requirements are at least 2.5 MB per second throughput for random readings of 4 kilobytes (KB) and 1.75 MB per second throughput for 512 k random entries.

  Using memory in your storage device to speed up your computer

  (Article is for Windows 7)

  b. ReadyBoost acts as a cache of HARD disc (hard drive) and is not a replacement for direct system memory. It will not improve processing speed, but will help the launch of faster applications and push background applications that serve much in memory reserved ReadyBoost.

  For more information, please visit the links below

  Turn ReadyBoost on or off for a storage device

  Using memory in your storage device to speed up your computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Incorporate the goods not listed is not on the site once downloaded via FTP

  Hello

  I just tried to download a new website via my FTP and downloaded once all embed assets which are logos in the header and footers do not appear, just a question mark appears.

  It never happened in the past with my previous sites and assets to embed that do not appear the rest appear correctly.

  No error is coming, or anything and I have no idea why they do not appear. Please see the pictures below.

  Any help would be appreciated!

  Thank you

  Sally

  

  Thanks for sharing the URL. I have observed that the issue is happening only with SVG images.

  As an overview of works fine in Muse and locally, that means there is nothing wrong with active generated muse or codes but there are few servers that prevents the loading of SVG files.

  I recommend contacting your FTP host to remove these restrictions with SVG files and you will be ready.

  Kind regards

  Vivek

• Lab Manager 4 will not release the license after the removal of host.

  Hey there,

  I am running Lab Manager 4 in my infrastructure.  I recently added a lot of CPU 2 and licensed.  Shortly after, I removed the host of Lab Manager, but he has not published the 2CPUs of licensing - which means that I am able to use my license 2CPU part to add new hosts.

  No idea how I can get the license for free?

  Thank you!

  You must "unprepare" this ESX host in the laboratory Manager.

  The 'prepare' function consumes your license, and similarly "unprepare" frees.

  This ESX host appears in the overall organization > resources > Hosts?

  Best regards

  Jon Hemming

• I delete a specific cookie and it reappears automatically. How to permanently remove a cookie? I'm not on the website, but the cookie will not go away.

  I went in and deleted my cookies and I closed my options and then returned and one in particular was back. So I completely closed FireFox, it has reopened and left on empty FireFox homepage. Then I went and remove said cookie again, but no matter how many times I delete it, it just reappears. I'm not on this website, it will not go away.

  Cookie information is below:
  Name: synthasiteVisitorId
  Content: C60A7791-2C50-0001-9A76-EF6C17B16980
  Host: hellfirecoven.yolasite.com

  Edit:

  I delete all my cookies with the exception of the 5 or 6 that are Web sites that I visit daily. I went and deleted all cookies and cookie above was successfully deleted.

• Qosmio G does not recognize the mouse using two left USB ports

  I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand.

  The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.
  He went through the process of installing the drivers (even if it was done a few weeks ago, when I plugged in the port of the right hand)

  In any case the mouse doesn't at all plugged into ports on the left side.

  Does anyone have any ideas as to why what is happening?
  Look of Sean.

  Hello

  Have you tested the two left with other USB devices USB ports. That is to say USB flash stick?
  Maybe you should do this to see if it could be a defective USP port.

  But I recommend to test this;
  First disconnect all USB devices
  Then go into the Device Manager and all the USB host controller and hubs USB remove from the list of devices.
  Close all windows and restart the laptop.

  Finally the operating system should recognize the new devices (USB ports) again.
  Connect a USB device to one of the ports on the left and check if it would work.

  Good bye

  PS: What Qosmio do you have?