Solutions to the problem of CD/DVD drive cannot read DVD discs
This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.
Solution1. Clean the DVD disc
If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.
After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.
Option2. Check the disc to see if it has been damaged
Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.
Solution3. Clean or repair the CD/DVD drive
When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.
Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.
Post edited by: Newhampshireguy
Thanks for sharing your experience with us!
I think your assignment might be useful to others here in the community.
Tags: Toshiba
Similar Questions
-
Re: DVD of the (optical) drive cannot read a disc when inserted.
Hello everyone.
MY DVD drive can not read a disc when inserted.
When I check the Device Manager, it has the following against the optical drive error message:
"Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
How can I solve this problem and fix it for free if possible? Download a patch from the website of toshiba?
Your help is greatly appreciated.
Mark
See also http://support.microsoft.com/kb/314060/en-us and post comments.
-
T61 DVD drive cannot read some discs
I try to install H & R Block tax software, but the disk is not readable. I ordered a replacement from the seller (Amazon) drive and still have the problem. On the other hand, some discs work, for example, the H & R Block software 2 years ago.
Tips on troubleshooting DVD player or replacement?
These drives are 'plug and play', you don't even need a screwdriver. Unlock (the latch is in the drive, well visible, on the side RIGHT of your ThinkPad) pull chase him, insert the replacement, push the latch back in. Fact.
Post a WTB (want to buy) announce here and someone will come to your rescue:
http://Forum.ThinkPads.com/viewforum.php?f=11
Good luck.
-
I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Have had problems since 31/12/09. Tech replaced Dell hard drive 14/01/10 because all software solutions did not resolve various problems, including the screen black and white letters indicating the mode without failure, or count down the regular opening. System Restore has used several times, all software removed and replaced. New Quickbooks reinstalled two times 10, it usually starts up quickly. I was told not to turn it off, just let it run. It automatically goes into sleep mode, it still does not start correctly. Last message is that Windows has recovered from an unexpected shutdown; Windows can check online for a solution to the problem. Problem event name: bluescreen
Windows has recovered from an unexpected shutdown. Windows can check online for a solution to the problem. Problem event name: bluescreen.
Hi slopchop
In the last few days have installed new programs? Or Anti Virus?
Try the steps in this link and check:
http://support.Microsoft.com/kb/958233
http://support.Microsoft.com/kb/925810
Also refer to:
After back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I found the solution for the problem of sound-acpi with Satellite P100-219
Hello
I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?
See you soon,.
MIKHi Mik
As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.
-
Original title: Picture It Photo 2002
Recently, I upgraded my RAM to 1 G. Since 2002 the picture it will work, but immediately stop saying that it will inform me if there is a solution to the problem. Everything I read on this site, I think that the fix may be a patch. Question: anyone know how to get me to the patch?
Would appreciate it a lot! Thank you
This could it be? If not, Google more.
http://forums.CNET.com/7723-6136_102-301075/Microsoft-Picture-It-2002-crash-patch-for-XP-only/ -
Client to make VoIP calls
I recently started having problems, make VoIP calls from my computer. I use VoIP Busters (and using it for a few years without any problems). Evertime I try to call the destination phone rings a couple of times and then stop. The next thing that happens is an error message that says: "Client for VoIP calls has stopped working. Windows is checking for a solution to the problem. It is followed by another screen that says: "a problem caused blocking the program working properly." Windows will close the program and inform you is a solution available. " Nothing happens. How to overcome this problem.
I finally had to resort to the re-installation of Windows. This solves the problem. But don't forget to back up your computer and email address / addresses before you do.
-
My laptop model number is Inspiron 7520 15RSE. with i5 processor. and the amd graphics card.
I have 4 experience problems in my laptop.
1. whenever I press the power button to turn on my laptop, my screen becomes yellow with a horizontal silver line between the two and beep to start with a small break after 8 beeps and this process will continually. until and unless I have press the power button. I HAV tried formatting my windows (complete clean install), but the problem persists. and occurs at least 5 - 7 times a day each time I turn on my laptop
2. the problem is with my driver elantech touchpad touchpad, that is, every time that change the speed of the cursor of the mouse via the elantech touchpad software and then after restarting pc it always come back to its default position. I HAV tried to reinstall windows, then install the latest updated drivers but the problem still persists.
3. my catalyst Control Center does not work, I am not able to open the graphics properties and configure switchable graphics. It always gives me a message. control of catalyst application has stopped working.
I HAV tried installing the latest video of the dell website driver, but the control center does not open. Help, please.
4 color screen my sometimes becomes dark and light whenever I try to open something. like browsing, watching video.
I kknow that the problem is in the hardware, so please help me... : ()
As you have a laptop, better make this laptop in the computer Forum post here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Bev.
-
* Original title: software problems
Whenever I open my Kodak easy software, that he told me that he stopped working and no solution to the problem. How can I fix this?
To allow a person to better help you, can you provide more information please.
for example:
- What is the full name of the 'software kodak easy' AND its version number?
- Is it intended to be run on this version of Windows 7, or if it was originally intended for an earlier version of windows?
- What is the exact error message when it does not work?
- He has already worked on this computer? If so, when did it stop working?
If it is your program - http://support.en.kodak.com/app/answers/detail/a_id/36670/selected/true - it seems that it is no longer available for Windows.
If you have a 64 bit OS, it can help - http://support.en.kodak.com/app/answers/detail/a_id/30535/~/easyshare-software-on-64-bit-computer-running-a-windows-7-or-windows-vista/selected/true
If it ran on an earlier version of Windows, but will not work on Windows 7, try running mode of compatibility - http://www.sevenforums.com/tutorials/316-compatibility-mode.html - which may allow some older programs to run on a later version of the operating system.
-
Original title: games
When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)
Help, please. :)I just "uninstalled" pack of the accelerator, and it worked fine.
-
After signing in games for windows marketplace, then click play on the age of empires online, the game stops and says windows is checking for a solution to the problem. What is the problem?
Hello
Method 1: perform the steps from the link below and see if it helps.
Game hangs or quits unexpectedly
Method 2: perform the steps from the link below and see if it solves the problem.
The problems of performance of the play (Windows 7)
Hope this information helps.
-
Created at 7 elements photo albums. Made a backup file I imported into 14 items. Against all odds, the albums do not appear in the Organizer 14 Adobe elements. What is the solution to the problem?
johand61702707 wrote:
Created at 7 elements photo albums. Made a backup file I imported into 14 items. Against all odds, the albums do not appear in the Organizer 14 Adobe elements. What is the solution to the problem?
It was to be expected if you have made a backup from external software instead of using the recommendations of backup / restore of the Organizer:
https://helpx.Adobe.com/Photoshop-elements/KB/backup-restore-move-catalog-Photoshop.html
If you "import" the backup made by other software, you can only retrieve the metadata that you have voluntarily registered in the metadata section of your files.
The albums are NOT written in the files. They are lists of files stored in the catalog, like playlists for audio.
Because it is saved in the catalog, you have to run the process described above to retrieve the catalog or (if you install on the same computer) to 'convert' catalog.
-
I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser. Unknown error. (123).
You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.
-
DVD drive burning - I want to burn music from the Internet on a DVD disc
I want to burn music on the internet with a DVD disc. I don't know how to do it at all. Please tell me what to do step by step. Thank you!
HelloComing to burn these movies on DVD, you can use Windows DVD Maker, Windows Media Center, Windows Media Player or Windows Explorer.Find help below articles.Burn a CD or DVD in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-CenterBurn a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-PlayerImportant note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
Maybe you are looking for
-
How to enable IR on the Satellite A500/031
Does anyone know how to activate the IR port of a Toshiba A500/031 (part - PSAR9A-031001 number)? I can't find how to turn it on.
-
How can I move movies from my iPhone to icloud
How can I move movies from my iPhone to my iCloud?
-
Someone had their security options (slide, face unlock, model, etc.) is 'locked' be the administrator? When I had my Moto X I got just the standard slide to unlock but I remember downloading an app that required me to have a "safety lock" on the devi
-
Issuance of certificates using the Microsoft certification authority server
I'm pretty new to this. Can I know if I install an r2 ca server 2012 Windows offline / standalone sup, can I use it to create certificates and issue certificates? Or do I need to use a CA company online sub (with active directory) to perform tasks?
-
I need help with an old computer
I use an old computer with windows 98 is installed. The browser must be upgraded. Is it possible to upgrade the computer and if so with what?