[SOLVED] [3810 t + Windows7] Very low sound + microphone headset cracked

Similar Questions

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• Satellite L20-101 - very low sound

  Hello

  I have a Toshiba laptop Satellite L20-101, Windows XP (Service Pack 3). Yesterday, the sound of my laptop started to play very very low.

  Drivers audio (conexant AC-link audio) seems to work fine, and I'm all set to maximum volume.
  It was sudden. One moment he was working well, and the next time I start it the sound was strangely low.

  I don't know if it's a hardware problem, or if she could we have resolved to restore the entire system with the recovery CD (I prefer not to do so).

  Any ideas? Any help?

  Thank you

  Hello

  I think you should check the sound volume using the headphones.
  If the headphones work correctly the problem might be related to internal speakers.

  But to be honest it is really not easy to say what causes this problem as I said can be faulty speaker but you should also check all possible settings and perhaps a new OS reinstall would also be a good idea.

  It would be useful to know if the sound issue would persist using the laptop with clean, factory setting.

• Very low sound

  Hello

  I have reinstalled windows xp + sp2 on my toshiba satellite 3005-S307.
  The sound is very low.
  No yellow icon in the Device Manager; I downloaded this toshiba site Crystal audio driver and tried to install it but it wouldn't install.
  I used to run under win xp + sp1 and the sound worked fine.

  Pls advise.

  Thank you

  p.s. I've updated the driver for my intel 830MP chipset, but no change to the sound.

  Hello

  Have you checked all the settings in the detroit and Devices Properties?

• Very low sound on Compaq Presario C350EU

  I had a problem with no sound at all, I have installed Conexant and managed to get her back, but it is very low. Can someone please help?

  Message edited by Ameida on 21/07/2009 17:48

  Uninstall the current driver from Add/Remove programs in the control panel

  Install the driver modded below cash

  MS - UAA (required a reboot Audio drivers and modem), here

  Conexant SmartAudio 221 here

  How to install:

  Relax in a folder.run installation program.

  If it errors use Device Manager.
  In Device Manager, right click "Audio Device on HD", choose Update driver,
  Not to connect, install from a list or specific location,

  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when it complains.
  Reset.

• computer laptop dv5t: very low sound, solution?

  You just bought dv5t: very low volume, especially when recording on audio or video screen. Also, when I record on the screen, I hear picked up in the room, (talk, etc.) mixed. Can someone tell me what the correct sound settings should be for video screen and audio recording? I use debut video capture software and I use "mp3mymp3" for audio capture. Checked their manual, but cannot find a solution. I also use Skype to call and have no sound problem it. Windows 7 Home premium 64-bit. Thanks, Anne

  Hi Anne,.

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• Very low sound on Satellite L655-13U

  Hi friends...

  After long search for support... I came here on this forum to get help.

  I have the toshiba satellite L655-13 (PSK IEE) installed windows 7 64-bit OS... the problem is very low noise. even the volume controller level set to max... still very low. games and movies, youtube or yahoo messenger... its very low.

  I installed the latest drivers... and I tried all the possibilities to find the solution. but still no luck.

  Please can someone tell me the solution to improve the volume.

  my email is [email protected]

  Have you checked the volume level on some applications or players you use?
  Remember, it is also set to the maximum level.

  Using Winamp, windows media player or VLC player maybe?

• Satellite L450d-11 x very low bit-rate and cracking sounds

  Hello

  first time here,

  My satellite l450d audio output looks like at a very low rate, crack etc... and when I close the lid it make a kind of feedback noise hard.
  I tried to update realtek hd audio drivers with no luck.

  any help much appreciated.steve

  Hey Buddy,

  What operating system you have installed on your laptop?
  And where did you downloaded new audio drivers? The site Web of Toshiba or Realtek page?

  In addition, it would be interesting to know the same behavior on external speakers or headphones. You can test this?

• Camileo s20 very low sound recording

  Hello people

  Yesterday I bought a Toshiba Camileo s20, and I face the following 'problem '.

  When someone speaks in a standing position two or three feet from the camera, his voice is too low.

  They must be medium close to the entire camera/microphone (or be talking/shouting very loud) for their voices to be recorded to loud and clear.

  This is how work the Camileo cameras, or is it possible that I had a defective? Any way I could solve the problem?

  Thank you in advance.

  Post edited by: frederique

  Hello

  I have a Camielo: 30 and my camcorder does not support a special microphone settings.
  You can increase or decrease the sound but I do not know if this option would amend the volume mic too m.
  You can test it, but if this will not help increase the microphone volume so I guess there is no other option that could change that.

• The surround sound is very low

  I have very low sound, it's tru surround xt

  I have very low sound, I know, it should be higher

  Hello

  ·        What application you use to play music?

  ·        You play a file that is located on the HARD disk (hard drive) or a CD/DVD?

  ·        You play the file on the Internet?

  You can also try the the system volume of choking. To check the system volume follow the steps described in the article below:

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Very low volume on Portege R500

  The volume on my R500 (R500 - 11 c to be exact) is ridiculously low. Only with the volume at maximum (100) and using headphones I hear nothing, and even in this case, it is far too low to be useful. I can just do the test sounds to the left and then good listener when using his test detected in Control Panel-> Sound-> speakers (there no helmet to choose)-> Properties-> Advanced-> test. Unplug the headphones I hear nothing in the speakers, because of the (very low) sounds made by the fan and HARD drive. Play music (with headphones) I can just do the sounds are produced, but I can't even on what is happening.

  I tried the things mentioned in the "Satellite 5105-S901 sound is very low (even at max volume) to aid driver Toshiba ' thread without success (including the Loudness equalization).

  I am running Vista Business 32 bit and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe and Vista_Win7_R243_x86.exe the driver files and also used the util_mute_off_25847B.exe utility.

  Enabling silent makes the already weak sounds go completely silent, so I don't think it's a matter of mute.

  Jack detection works, I can see that in the Realtek HD Audio Manager program. Using sound test of this program (Configuration of the speakers) I have to go to a completely silent, and even in this case I can't hear something on the right headphone. (I think, it's darn so low, that I could imagine I hear.)

  Decreasing the volume slider sound 100 harder almost inaudible noise similarly points out, and around 45 it is more audible even in a quiet room with headphones.

  So it seems that I somehow need to reset the audio chip in a 'normal' level Or it is broken and does not display anything more audible.

  Does anyone have ideas, what I can try next? I can boot XP or Linux, if anyone has any ideas on how to get her here, just to start. (They are silent as well, I did not like extensive tests under those as Vista).

  Hello

  According to your message, you have tried to increase the volume by using all possible options
  Have you tried to increase the volume in Control Panel-> Realtek HD audio manager?
  Check this box

  You also tried to update the Realtek audio driver.
  Did you use the Realtek page directly?
  Check it!

  If this will not help, you might try the laptop with the new system recovered

  But if this does not improve the volume, then this could be a hardware problem

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  Buy a micro better use - one with noise suppression.  Sounds like inexpensive material.

• sound is very low

  His record game

  sound is very low

  Hi mubry_sa,

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Run the audio troubleshooter.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2: Search the hardware changes. Follow these steps:

  (a) click Start, type Manager of devices in the search box of start and press ENTER.

  (b) right click on sound, video and game controllers, and then click search the hardware changes.

  Method 3: Follow these steps:

  Step 1: Check the status of the speakers and headphones in the playback devices. If it is disabled, enable it. Follow these steps:

  (a) right click on the volume icon in the system tray at the right corner on the desktop.

  (b) select the playback device and activate the speakers and the headphones if it is disabled.

  Step 2: Set speakers as default device and check.

  (a) right click on the volume icon in the system tray at the right corner on the desktop.

  (b) select playback devices, right-click and set as default device speakers.

  Method 4: Follow the steps in the article.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  For reference:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

• External microphone level is very low?

  Hi, I have an iMac and am trying to use a condenser nw-700 Neewer with her microphone.

  I have a ghost (an Innogear IG101) supply and it IS lit.

  I have the microphone connected to the power source via an XLR cable, then the power supply of the outputs of the XLR jack 3, 5 mm plug, which is connected to the entrance at the back of my iMac micro.

  Everything is connected and switched on correctly.

  When I put external inputs: Line In System Preferences and/or Quicktime, even with the input volume turned up completely the microphone captures only very low voice.  Typing the spikes the input indicator microphone, so I know that the microphone is "hearing" sounds, but the entry level is low it is essentially useless.  The microphone must be less than 5mm of my mouth and I must scream until it's strong enough in the record.

  Any ideas what is the problem here?  Everything I bought is supposed to be 'plug and play', but it doesn't work well at all.

  According to the info on Amazon, this cannot be used with a Mac.