[SOLVED] IdeaPad 500 - problem of re - install Windows 10

Similar Questions

• I have a problem when I install windows xp

  I need to install windows xp on my laptop

  When I tried to install windows cp on my laptop, I got the problem below

  http://i333.Photobucket.com/albums/m375/RCP-Pro/RCPddd.gif

  Windows could not find my hard drive

  is my laptop: compaq presario cq57-401se

  I need to install windows xp somehow

  and I need to download my sata device driver... and I could not find

  Read the article from AMD on the link below and then read the downloadable PDF to find out how to integrate the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• I have a problem with re-installing Windows.

  Original title: Windows 8 installation disc

  I have a laptop HP with Windows 8 is installed. I want to use the installation floppies set that I arrived at HP to re - install Windows 8, but even after reset the boot sequence, it does not start from the first CD.

  What I am doing wrong?

  How to reinstall Windows 8

  You have two options:

  If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.

  To do this, follow these steps:

  · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · In virtue remove all and reinstall Windows, click Start

  Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

• HP laserjet 3050 problem. After installing windows 7, is it became unable to use the fax machine.

  Standart windows 7 fax-program can not find the driver for my HP Laserjet 3050 all-in-One printer fax-modem. How can I solve this problem?

  Hello

  What type of operating system are you using?

  For Windows 7 32-bit, it is possible to install the full feature software Vista using compatibility mode:

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02096212

  For Windows 7 64-bit however there no all the features available.

  You can use the In-OS driver that will provide your printing and basic scan feature via USB connection only, since the PC faxing is not supported for the specific version of the OS:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536257

  If you are not sure of your operating system type, you can follow the steps below to identify it easily:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02002390

  Kind regards

  Shlomi

• Several problems after you install Windows XP on TE2100

  I have a TE2100 and then I put in place the new operating system windows xp professional after finish I open window but not display full right is missing about 1 Inc. (upper left butom OK full) I search the device have yellow question mark '? ' "PCI Device" device
  How can I do it please tell me. Original card on Nvidia Geforce 4 220 (I don't remember)

  I have problem to even some bodies in the forum is the member name Stockcar44 you can watch on my link:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31914&TSTART=0

  I'm sorry for not good English because I'm Thailand people

  Thank you for all

  Man, I'm sorry, but that is not acceptable you ask a question, post a link that contains the answer to your problem and ask what to do.

  I can only tell you what is written in the you´ve link posted: check the BIOS if "full screen" is enabled and updating your Videodrivers.

  That will solve your problem.

  See you soon

• B450 WiFi + Bluetooth + Fn key problems after I installed Windows 7 Ultimate 32 bit

  Last night, I did a fresh install of Win 7 Ultimate 32 bit on my B450. I deleted the OKR partition during the installation. The problem is that the Win7U does not recognize wifi and Bluetooth. I tried to manually install the drivers for the wifi and the Bluetooth through the Windows, Device Manager is still there. The Fn + F5 combination also does not work when I try to access the webcam, wifi and bluetooth. Help, please.

  http://consumersupport.Lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=838066

• Problem with transfer/install Windows to new SSD 64 GB instead of 1 TB HARD drive

  Hello everyone!  I know that I am not alone with this problem, but until now no effective don't advise have been seen or given!

  Please help get 1 TB of HARD drive for the 64 GB SSD in my Alienware m17 r4!

  Alienware Respawn program is NOT able to cope with this transfer... He said that there is no enough space, must be original 1 TB drive...

  Also, it is strictly recommended that new windows should be installed SSD not transferred again, but how do I do it?

  with the new system UEFI/BIOS it is looks too difficult for me... There is no installation of Alienware Microsoft Windows 8 Disk in the package comes...
  If I can get it? And then, he of course it will work correctly in the UEFI system

  Have tryied: MINI TOOL PARTITION WIZARD, it shows all containing (5 partitions) completely has been copied from 1 TB of disk and mounted on the SSD 64 GB

  but when I put the SSD in the laptop, he says is that some sort of error and the system must be reinstalled.  CD of Acronis not picked up at all with boot...

  Finally, it will be normal Windows 8 installation CD compatiable with UEFI, or it must be special for this system? (average if I leave and through her to the shop)

  Is any body can help?

  Thank you in advance in this area!

  The license of Windows 8, my understanding, is the UEFI. So I recommend that you ask the disc from Dell.

• I have a problem with re - install Windows 8.

  Original title: WINDOWS 8

  Hello

  I have a copy of windows 8 current running on my home pc, but I have problems with the PC, I need to reinstall windows 8 on another pc, I can do it without breaking the rules?

  Hello

  If you have a copy of Windows and installed on several PC, activation may not work because the product key has already been used on another PC, or it is used on PCs more than to let the Microsoft software license agreement. Normally, the rule for most copies of Windows is 1:1, which means that a copy of Windows can be installed on a single PC.

  If your product key is used on PCs to let the Microsoft software license agreement, you will have to purchase a product key for each of your computers in order to activate them.

  Check out the link for more information.

  Why can't I activate Windows?

  http://Windows.Microsoft.com/en-in/Windows-8/why-activate-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• problem with re-installing windows 7

  I had a hard disk crash.  Bought new hard drive retailer local (same HD that crashed) and installed.  Order the Lenovo recovery disks.  Tried to install via DVD-rom.  I got an error PXE.  I disabled the book of network from the bios.  I moved the DVD-rom at the top of the order started with HD then backed up and restarted.  I get a message "operating system not found '.  I can hear the DVD drive spinning.  Help, please.

  Thanks for the reply.  After watching hundreds of solutions possible icies and talk with someone at lenovo, it turns out that the problem was the disk they sent was bad... ugggghh.  They sent a new disk recovery and magically, it worked.

• Equium A200-1VO - problem of re-installing windows

  My son has decided to use the dvd to put the cookies in.
  What has the dvd nackered. So when my hard drive packed in I got a new hard drive and an external dvd drive.

  Tried to boot from usb but does not recognize the dvd drive. So I put the hard drive in my pc and windows loaded on it.
  Replace the laptop hard drive and nothing happens just get pxe - e61: media test failure, check cable and pxe - m0f: exit pxe rom,.

  It just goes round flashing on the screen.

  Any ideas anyone

  Hello

  After my experience at the A200 BIOS does not allow starting of external CD/DVD drive. You can boot from HDD, CD/DVD player, USB FDD or LAN.

  The error pxe - e61: media test failure is because the laptop has attempted to boot from LAN.
  I think that this happens because the drive HARD or Windows on the HARD drive was not recognized.

  You can try this:
  Copy the i386 Windows XP on the HARD drive folder.
  Then put the HARD drive in the laptop. Boot from USB bootable FDD (floppy) and go to the folder i386 to the HARD disk.
  Here, you can use the winnt.exe command to start the configuration of Windows XP installation.

  Should work

• instaler Windows

  Hi im having a problem with my instaler windows every time iv been trying to get the new update for itunes i get a messege saying windonws instaler cannot install ituned due to a common error that a program in instaler couldn't be run and it keeps telling me to get incontack with windows, but because I do not know how 2 and I can't find a way to do so in January Internet or find a reely I don't know what can any1 help there them?

  How do you try to update Itunes, it's an update by a currently installed version of Itunes or you downloaded a later version of setup.exe of Itunes that you are now trying to install?

  Have you tried right clicking on the shortcut to the program, or the Setup.exe and select "Run As Administrator"?

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  Maybe some security programs interfere with the update?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you can post back with the error message that is accurate and complete, it could help solve the problem.

  See if this will take you in what help and support to Microsoft customers supply.  If your operating system came pre-installed then you could get directed to the real OEM (OEM) who is responsible for your machine, including the provision of assistance and support for the operating system.

  http://vchat.support.Microsoft.com/contactus/default.aspx?query=digital%20Image&scope=en_US

• AVG Internet Security and AVG PC Tuneup will cause problems after upgarding to Windows 10?

  Original title: AVG vs 10 widows

  I used AVG Internet Security 2015 and AVG PC Tuneup 2015.  They will create no problem if I install Windows 10 as a replacement for Windows 7 Home Edition? wouldn't be better to remove them?

  If you look at the AVG support community there is not a lot of issues with AVG and Windows 10 products and the few that you can read on are resolved quickly - usually with an AVG uninstall and reinstall (especially after the migration of the BONE).

  If you are migrating your Windows 7 to Windows 10 I think I would uninstall all AVG products if they don't get in the way, completed the transition from OS and then reinstall AVG products from scratch on Windows 10.  Some problems of AVG support are usually solved with uninstall/reinstall anyway.

  From the looks of the circulation in this Windows 7 community, you're more likely to have questions Windows 7 migration to Windows 10 (or try to go back) with AVG.

• No sound after installing Windows Update KB2962407 on Windows 8

  After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

  Hello

  Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

  Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .

• Re: IMPORTANT - how to install Windows 2000 on a Satellite L300 - 16 M (PSLB0E)?

  Hello

  I am an independent developer and absolutely need to install multiple operating systems on my * Satellite L300 - 16 M (PSLB0E) *: it is very important for me because I need to check the functioning of the software under each environment for real (not not using solutions like VMware, for example).

  Well, then, right now, I did a backup Acronis image of original full HDD, and then deleted the original scores of WinRE and data, reduced and moved from disk to the partition of Vista... and installed System Commander 8 to prepare my future multi - initialize. For the moment, everything sounds right: Vista works perfectly!

  Also note, I have configured the SATA in the BIOS Setup in "Compatibility" mode just because I don't need AHCI in my type of use!

  Second step: now, * I have to install Windows 2000 Pro (SP4) EN *. Of course, I am aware that the sticking point is the SATA/AHCI driver, which is not present in the CD of Win 2 K... So, I just make a new CD integrating these drivers using nLite; now, I tried using the driver Intel site on Intel 82801 HEM / HBM SATA AHCI controller (ICH8M) and page drivers Toshiba XP.

  But it does not completely: the Win 2 K install begins... All the drivers are well charged (including the ones AHCI) and just after this stage of loading, I get a black screen with just a blink of an eye cursor at the top left of the screen... indefinitively :-(

  I tried also to SATA mode "AHCI" in the BIOS and it's the same thing.

  So, what to do next?

  I used the wrong AHCI drivers? Do I need to integrate as many drivers Toshiba (about chipset, display, sound) in the installation of Windows 2000 using nLite CD? I mean the capacity of the CD is not reached.

  Is there a way or a tutorial to install Windows 2000 somewhere? For XP, I think it will be easier because SP3 seems to support AHCI, but earlier, my problem is to install Windows 2000: Although Microsoft wants to leave-it, there are many professionals who still use-it... And my work as a developer, is to make my software also works on this OS! * I really need to find a way to install it on this computer! *

  Awaiting your response informed and all the tips or idea that could help me to complete the task.
  In a word: HELP! Oops!

  Post edited by: eanon

  > No I used the wrong AHCI drivers?
  Perhaps.

  As far as I know that you need the crib Intel Matrix Storage and in this package, you will find the SATA drivers.
  http://www.Intel.com/support/chipsets/IMSM/index.htm

  There you have to choose to get the latest driver - version PV-> Win 2000 8.5-> there you must take the package from point 3

  Good luck

• How to install windows 7 on a mid-2015 rMBP?

  Hello! I have a problem, try to install Windows 7 Pro x 64 via Boot Camp on a mid-2015 rMBP. The laptop came with El Capitan preinstalled that BCA 6.0.1 who does not choose any OS prior to version 8 of Windows. And I really need a Windows 7 for reasons of the software company. Is it possible to persuade the laptop to accept Windows 7 without invoking Voodoo weird software? Certainly, I scoured the forums before posting here, but has not found a solution to my problem.

  Thanks in advance,

  Andy

  If you really need W7 on this particular model, it requires a little bit of Voodoo if Bootcamp is a must. The simplest solution is to use virtualization, and create a virtual of W7 machine.