[SOLVED] Integrated security and the Oracle Enterprise Manager

Similar Questions

• Start and stop of the Oracle Enterprise Manager Console

  I read 2DayDba. Here wrote:
  Log in as the oracle user's operating system. Issue the following command to start the dbconsole process:
  emctl start dbconsole
  
  I opened cmd and wrote that.
  ORACLE_SID environment variable not defined. Please define
  
  I understand, but I don't know excatly.

  Set oracle_sid = ORCL

  from your command prompt

  and then launch emctl...

  Published by: Mihai Vigariu, 11 November 2010 21:28

• Page cannot be displayed the Oracle Enterprise Manager...

  I have the Oracle 10 g database... 10.2.2
  So I want to open the OEM page to create the new user/database...
  the problem is that I don't remember the port number which should fill this < http://myhome:-default >
  can I get the port number of any text from the oracle directory file, or just use the default 1521...
  I try but the page won't come out... It's just a blank white screen, but to basically say "fact".»
  where I'm going wrong here help please...

  Hello

  I think you're talking about Enterprise Manager Database Control to find the file of portlist.ini consult port located under ORACLE_HOME\install.

  Another way, I guess you are on Windoze:

  set ORACLE_HOME =
  Set ORACLE_SID =

  CD %ORACLE_HOME%\bin
  emctl status dbconsole

  and check the result

  I hope this helps!

  Moussa

• Oracle Enterprise Manager 12 c

  Hello

  Could you please say for a solution using Oracle Enterprise Manager 12 c?

  Scenario: We have 2 DBA providers to exploit our databases and 1 Oracle Enterprise Manager 12 C to manage all databases.

  Once we cannot have an OEM 12 C to each group of databases, is it possible to have a segregation off the coast of access by group of databases?

  Another question is: is it possible to lock the rule 'Edit' the administrator of OEM to a group of databases managed on the basis of this OEM?

  Thank you.

  Greetings Antonio

  Scenario: OEM - Admin = Z

  S/n of databases X = X

  S/n of Y = Y databases

  X has only s/n X (OEM use) databases management

  Y has only s/n databases management Y (using the OEM)

  and Z has only read-only access to the databases X and databases Y.

  X and Y cannot have the administration o OEM.

  Thank you.

  Hello

  Good to know that the thread above has been useful for you. As your question has been answered can you please mark the thread as answered for others users can also benefit from.

  Concerning

  KRishnan

• Console Oracle Enterprise Manager

  Dear Guys,

  I need to download the Oracle Enterprise Manager console (see Figure 2-1 at the level of The stand-alone Console ) that can connect to multiple Oracle 9i R2 database to Manager them from a single console. I couldn't find a download link. Can someone guide me please its download link as well as the documentation on how to install it?

  Once you install the grid, you should be able to save all the other databases by installing agents on the target databases.

  Onkar

• Installed firefox 31 and now I can't seem to our oracle enterprise manager URL 12 c

  Hello

  Monday, I've upgraded to Firefox 31 and now I can not connect to our site Web of Oracle Enterprise Manager Cloud Control. I get the following error message:

  The secure connection failed

  An error occurred during a connection to lmoemxs101q.atl2.dc.sita.aero:7799. The issuer certificate is not valid. (Error code: sec_error_ca_cert_invalid)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
  

  I don't know what to do to get rid of this message. I need to use OEM to monitor our Oracle databases, and I am no longer able to do this.

  Help, please.

  Thank you
  Roya

  Maybe you can remove or distrust 'problematic' certificates are part of the authorities and add it again. Please refer to this post.

• installation 12.1.0.4 Oracle enterprise manager cloud control on solaris 64-bit of the sparks

  Dear all,

  
  

  We have a 10.2.0.5.0 Server Enterprise edition db Oracle Solaris spark 64bits.

  We want to install Oracle enterprise manager on that server by using the server db as the repository FRO the EM server.

  
  

  We are download release of the EM below. So my question is that this version of the MA that we download is valid for this version of the OS, or we need to download another version.

  
  

  And you can share a best tutorial to install the EM 12.1.0.4 in 10.2.0.5 db repository on Solaris spark 64bits.

  
  

  Oracle Enterprise Manager Cloud control 12 c Release 4 (12.1.0.4)
  for Solaris (SPARC) operating system

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/Solsoft-094433.html

  Future prospects for expert advice.

  Regarding

  Nimai kinzonzi

  Yes it is a valid combination. Please follow the installation guide.

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/TOC.htm

• management of the PDBs with Oracle Enterprise Manager Express

  Hello

  is 12 c, possible to manage the PDBs with Oracle Enterprise Manager Express?

  How to find the URL?

  When I run select dbms_xdb_config.gethttpsport (double); on a PDB file, it returns no rows.

  More tutorials

  https://Apex.Oracle.com/pls/Apex/f?p=44785:24:4833387311898:P24_CONTENT_ID, P24_PREV_PAGE:6282, 24

  I have not seen.

  Thank you.

  is 12 c, possible to manage the PDBs with Oracle Enterprise Manager Express?

  Yes - but you will not have the COMPLETE management functionality. See the FAQ doc:

  http://www.Oracle.com/technetwork/database/manageability/emx-CDB-1965987.html

  Can I Plug and unplug the PDBs with EM Express?

  No, EM Express does not all CBD management capabilities in DB 12.1.0.1.0.

  Review ALL sections of doc

  How to find the URL?

  When I run select dbms_xdb_config.gethttpsport (double); on a PDB file, it returns no rows.

  Have you set up EM and set the port to the PDB? Again - see the FAQ doc

  http://www.Oracle.com/technetwork/database/manageability/emx-intro-1965965.html#A5

  How can I configure EM Express on CBD and APB?

  Users can configure EM Express at the root and container of the PDB, with each container using another HTTP/HTTPS port.  When it is connected to the root container, the information displayed are the entire database, including all PDB files.  When it is connected to a PDB file, displayed information is limited to the PDB data.  For more information, see the section on EM Express on the CBD.

  http://www.Oracle.com/technetwork/database/manageability/emx-intro-1965965.html

• Install the latest version of Oracle Enterprise Manager Cloud control 12 c

  Hello
  We want to install the latest version of Oracle Enterprise Manager Cloud control 12 c in Linux x 86-64 (64-bit) platform. Oracle Web site
  link http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html we found 12.1.0.2 is the latest version.
  
  My query is-
  
  is 12.1.0.2 version is the latest version for the control of cloud?
  If we install 12.1.0.2, is there a patch to be applied after update install the latest version?
  
  Thank you

  As mentioned Rob you should also check My Oracle Support for the recommended patches. Go to patches and updates | Search patch | Research | Recommended Patch advise and serve 'Business Manager Base platform - WHO' the product. You can use this to get a list of the patches to be applied.

  Best regards, Marc.

• Oracle Enterprise Manager 12 c - error of SGD

  Dear team,
  
  We are working on the database Oracle 11.2.0.3 on Linux platform. Today, we have tried to install Oracle enterprise manager 12 c and it installed successfully.
  
  But when I try to start the who, its giving the error message below:
  
  [oracle@development2 bin] $. / emctl start SGD
  The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/development2_orcl not found.
  
  I checked and found that the hostname_dbname folder is not available at the location of $ORACLE_HOME.
  
  I am able to open the weblogic console, but unable to connect EM right above error.
  
  Please let me know how this problem can be solved.
  
  Grateful for your assistance.
  
  Kind regards
  Saurabh

  You run emctl off $ORACLE_HOME/bin (which would begin control of single instance database tool), instead of run emctl off $OMS_HOME/bin (which begins OEM 12 c Cloud Control).

  Run the following: $OMS_HOME/bin/emctl start SGD

• install Oracle Enterprise Manager in DefaultDomain (embedded weblogic jdev)

  Hello.
  I'll install the OEM in the embedded weblogic DefaultDomain.
  But when I run the Setup Wizard I did not have the option 'Oracle Enterprise Manager'
  
  Thank you
  
  Published by: change on December 7, 2010 14:12

  First, the integrated WLS manages MDS differently for the cycle of test-run-dev (he uses a special file-based repository), and I wouldn't necessarily use the WLS integrated for this article. If you want to continue to install OEM in the integrated field jdev, you need to properly install execution of Application development - you cannot install only 11.1.1.3 (it's a patch) - you must first install 11.1.1.2.

  John

• Oracle Enterprise Manager - do not start

  My OEM was in working condition, it stops working when I try to start now, it gives me the following message.
  

  -bash-3.2$ emctl start dbconsole
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 
  Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
  https://mehran:1158/em/console/aboutApplication
  Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed. 
  ------------------------------------------------------------------
  Logs are generated in directory /u01/app/oracle/product/11.2.0/dbhome_1/mehran_scba/sysman/log 

  Please help me solve this problem...

  Hello

  There are several errors found...

  Failed to start the HTTP LISTENER and

  Exceeded Max authorized data Upload - number of files: 519, data of the upload size: 20,047117 MB, Pct (%) disk used:7.15%, disabling of the collections (00852) 2010-10-18 14:57:12, 120 thread-1135905088 disable collector (00406)

  You can post the results of

  $ emctl staus dbconsole
  agent of $ emctl status

  If everything is running... and try to uplaod data manually using

  $emctl download agent

  If still problem persists... better if you reconfigure. OEM...

  http://www.akadia.com/services/ora_dbconsole.html

• 10g to Oracle Enterprise Manager Application Server Control does not work

  Hello
  We have installed the application on 9.21.0.98 Server (solaris machine).
  For the server is woking, but the report server does not.
  
  Now I want to connect to Oracle Enterprise Manager 10 g Application Server Control
  to solve the problem
  
  In my PC (windows), I opened internet explorere (IE), and I entered the following URL
  http://9.21.0.98:7778 / (7778 is probably http port)
  Now I see a web page.
  
  Here I see the following on the right side of the page
  
  Oracle Application Server Logins
  
  To manage and monitor Oracle Application Server,
  
  Log on to Oracle Enterprise Manager 10g Application Server Control:
  username: ias_admin
  password: specified during installation
  
  When I click on this link http://9.21.0.98:1156 / URL has appeared on the IE and I get the following error
  Internet Explorer cannot display this webpage
  
  Now to see if any application is running on this port (1156), I logged the solaris machine where the application server is intalled and I exected netstat - a | grep 1156 command. But he didn't show me anything
  
  Could you please solve my problem?
  
  Concerning

  Is it possible to change the name of report server?

  See Paulo Esteves answer in How to change the name of the report server?

• Oracle Enterprise Manager 10 g is not running.

  Dear all,
  
  Could you please help me to solve my problem of OEM, which is mentioned below.
  
  Oracle Enterprise Manager 10 g is not running.
  
  [oracle@abcxyz ~] $ emctl status dbconsole
  TZ defined on Asia/Riyadh
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  https://ABCXYZ.ABC.com:1158 / console/em/aboutApplication
  Oracle Enterprise Manager 10 g is not running.
  ------------------------------------------------------------------
  Logs are generated in the directory/u01/app/oracle/product/10/rdbms/apscolinux1_ORADB1/sysman/log
  
  -the above log output is as below:
  
  2008-09-29 15:07:18 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com:3938): Connection refused (error = 111)
  2008-09-30 03:13:14 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:3938): Connection refused (error = 111)
  2008-09-30 15:19:13 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:3938): Connection refused (error = 111)
  2008-10-02 19:03:05 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:1158): Connection refused (error = 111)
  2008-10-04 22:54:56 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:1158): Connection refused (error = 111)
  2008-12-13 14:25:09 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:1158): Connection refused (error = 111)
  2008-12-13 14:35:12 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:1158): Connection refused (error = 111)
  2008-12-13 14:42:05 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:1158): Connection refused (error = 111)
  2008-12-13 15:19:16 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:1158): Connection refused (error = 111)
  2008-12-14 09:56:47 WARN Thread-4135910176 http: snmehl_connect: connection failed (abcxyz.abc.com.com:1158): Connection refused (error = 111)
  
  DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  OS: Linux Redhat 5
  
  Thank you
  Iqbal...

  have you tried the following steps:
  1 set ORACLE_SID and ORACLE_HOME
  2 emca-rest recreate
  3 emca - dbcontrol db config
  4 emctl start dbconsole

• Oracle Enterprise Manager control cloud 12 c - price

  Hello

  More than 50,000 databases Oracle (70% Enterprise Edition and 30% Standard and Enterprise edition), if I want to master all the 50 000 + databases Oracle Enterprise Manager Cloud 12 c for the tasks of monitoring and administrator, how the license part works? I know that the OEM is free with EE. Is that this applies to the control of the OEM Cloud 12 c?

  Thank you

  Vel

  All responded in the well-appointed 'Enterprise Manager licensing information' document.

  For example, on this page: http://docs.oracle.com/cd/E24628_01/doc.121/e24474/ch10_base_functionality.htm#OEMLI333

  "Installation of the Enterprise Manager control 12 c cloud base includes several free features with the purchase of any Oracle software license or support contract."