Start and stop of the Oracle Enterprise Manager Console

Similar Questions

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• PowerCLI defining politics NTP to "Start and stop with the host" in ESXi 5

  Would appreciate any help in the definition of the strategy NTP on ESXi 5 hosts 'start and stop with the host. My script is currently using the following:

  Get-VMHost MyEsx | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-policy "automatic."

  This sets up the NTP service in "start automatically if all ports are open and stop when all ports are closed.

  "When I cange to 'MyEsx Get-VMHost | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-political ' market / stop with host"" the following is returned:

  «The possible enumeration values are "auto, On, Off«»»»

  Anyone know of a way (in PowerCLI) of the set up for the 'start and stop with host?

  OK, then you should choose politics "on".

  These are the policy values and what they match.

  

  Like this

  Get-VMHost MyEsx | Get-VMHostService | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy On
  

• Oracle Enterprise Manager Console > java.exe - Entry Point not found

  Oracle Enterprise Manager Console > database connection information is displayed > enter username and password, then click on the OK button > suite error message appears
  
  Java.exe - Entry Point not found
  
  The procedure entry point OCIConnectionPoolCreate is not found in the library of dynamic links OCI.dll
  
  I am running Windows XP Pro.
  
  Help, please... Thanks in advance.

  Only a general Council is possible. This kind of error occurs when there are the mismatches in your installed Oracle software. In your case "java.exe" and "oci.dll" do not suit each other. You may need to repeat the installation. Keep an eye on the error messages.

  Werner

• [SOLVED] Integrated security and the Oracle Enterprise Manager

  Hi, I set up an oracle instance with infallible oracle on a cluster with two nodes of microsoft.
  On Oracle failsafe documentation is written that I have to use the enterprise Manager grid:
  [http://download.oracle.com/docs/cd/E10736_01/doc/server.341/e11080/ofs_agent.htm]
  
  Is it possible to use the normal Enterprise Manager?
  
  Maybe a solution is to set up em with the virtual address of the cluster, but the HOST of the MA parameter doesn't seem to work (which seems to be ignored).
  
  System information:
  Oracle 10.2.0.4, Windows Server 2003 64-bit
  
  Please tell me if I should add more details.
  Hope you can help me.
  Thank you very much
  Adriano Aristarco

  Please check the notes 452305.1

• Oracle Enterprise Manager Console > TNS-04404 / TNS-04414

  Console Oracle Enterprise Manager
  The release 10.1.0.2.0-production
  
  Running on Windows XP Professional
  
  =================================================
  Impossible to analyze the tnsnames.ora file
  
  oracle.net.config.ServiceAliasException: TNS-04404: no error
  caused by: oracle.net.config.ConfigException:TNS - 04414: file error
  caused by: TNS-04612: Null HHR for 'QCCP1. WORLD:
  0
  =================================================
  
  (NOTE): I understand that this question is related to TNSNAMES. ORA file. I have another computer and the OEM Console works fine on this computer. So, I copied the TNSNAMES file. File ORA from the other computer, but still, I get the same question.
  
  Please let me know if you can help me with this problem. Thanks in advance...

  So, I copied the TNSNAMES file. File ORA from the other computer, but still, I get the same question.

  You have copied it to the wrong place.

  SEARCH the entire drive on the system with the error for tnsnames.ora.
  You have more than 1 copy now!

• Page cannot be displayed the Oracle Enterprise Manager...

  I have the Oracle 10 g database... 10.2.2
  So I want to open the OEM page to create the new user/database...
  the problem is that I don't remember the port number which should fill this < http://myhome:-default >
  can I get the port number of any text from the oracle directory file, or just use the default 1521...
  I try but the page won't come out... It's just a blank white screen, but to basically say "fact".»
  where I'm going wrong here help please...

  Hello

  I think you're talking about Enterprise Manager Database Control to find the file of portlist.ini consult port located under ORACLE_HOME\install.

  Another way, I guess you are on Windoze:

  set ORACLE_HOME =
  Set ORACLE_SID =

  CD %ORACLE_HOME%\bin
  emctl status dbconsole

  and check the result

  I hope this helps!

  Moussa

• VI does not work properly when run at each full speed or highlight the run mode, but running at full speed after the starting and stopping of the execution mode games

  Start labview, so fix that will probably teach me a lot. Looked and saw a lot of posts of things only work in games of the run mode, but nothing like this. I have attached the relevant real-time and FPGA VI.

  The code is supposed to read a motor encoder. When ran regularly, it works somehow. It will update the counter of how sporadic all few seconds a fraction of a second. When ran in climax run mode, it appears really up-to-date. After that matches the execution mode is canceled, it works perfectly. Can someone find out what could be the problem?

  Ended up staring at me. I am sure that the problem was that if there is only one element in the FIFO when it checks first, it eliminates the two elements when the FIFO filled.

  Fixed it by adding a test for the number of items before and reading only if there are enough items to read. Attached file sets for reference.

  I have still no idea why he was running after delivery to highlight in the first place. We will never know. Bonus points for the answer = P

• Guest operating systems take a VERY long time to start and stop to the bottom/connection

  I have a virtual VSphere version 4.1.0 of the client machine, I have a few top server, when I try to start or to stop them, they can take at least half an hour to do this.

  I really want to get this resolved, because it's way too long for an operating system to start.

  The server I want to talk to is a Windows 2008 64 Bit operating system.

  All the tips are greatly appreciated.

  Thank you

  Then replace the HARD drive.

  My guess is that it's completely unrelated to performance or whatever it is. It's probably a script to shutdown/startup/login or performed during these, making it a matter of the GuestOS. Maybe something trivial like nameserver names insoluble / defective (responses), waiting times of the ICF block or something similar.

  If the system running normal operations are fine, there is no ESX(I) - reason why he should be 'slow' for those own time only. Check the disk latency/throughput/Ops ARE / s when he knows.

• Console Oracle Enterprise Manager

  Dear Guys,

  I need to download the Oracle Enterprise Manager console (see Figure 2-1 at the level of The stand-alone Console ) that can connect to multiple Oracle 9i R2 database to Manager them from a single console. I couldn't find a download link. Can someone guide me please its download link as well as the documentation on how to install it?

  Once you install the grid, you should be able to save all the other databases by installing agents on the target databases.

  Onkar

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• How to stop the EN icon appear in Windows 7 Pro to start and stop

  I have a language loaded on my computer.  Whenever the computer starts and stops at the icon IN displayed on the screen.  I looked in the obvious places like Start > Control Panel > clock, language and region, for a possible solution for this turn.  The language toolbar is turned off and is not reduced to a minimum or displayed anywhere.

  How can I prevent the EN icon appears?

  Thanks Omnicore you snapped.

  I don't know if that has an effect, but under keyboards, I got two installed?  The keyboard for the United States and the other for the United Kingdom.  I deleted the one for US as I am in England, applies the settings and rebooted the system.  The stop screen does not display the icon of EN, but on the home screen icon EN reappeared.

  So I applied the settings of copy on the administration tab, and after the system restarts, it erased the EN icon on hospitality and the stop of the screens.

  I appreciate you taking the time and allows you to reconfigure your computer to solve this problem for me.

• Ubable to start the Enterprise Manager console through a browser in Oracle 11 GR 2

  Dear friends
  
  I tried next. But I'm not able to get the console em via my web browser.
  Here, I write what I done.î started my listner of database and databases, she found working properly. So please let me know what I'm missing here.
  
  [oracle1@WBH-DB1 ~] $ echo $ORACLE_HOME
  / ora11gsoft/ODB/OH1
  
  [oracle1@WBH-DB1 ~] $ echo $ORACLE_SID
  wbdata
  
  [oracle1@WBH-DB1 ~] $ echo $PATH
  /usr/lib/Qt-3.3/bin:/usr/Kerberos/bin:/usr/local/bin:/bin:/usr/bin:/ora11gsoft/ODB/bin:/ora11gsoft/ODB/OH1/JDK/bin:/ora11gsoft/ODB/OH1/JDK/lib:/ora11gsoft/ODB/OH1/bin
  [oracle1@WBH-DB1 ~] $ hostname
  WBH - DB1.wbtea.com
  
  [oracle1@WBH-DB1 ~] $ emctl start dbconsole
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  https://WBH-db1.wbtea.com:1158 / console/em/aboutApplication
  Oracle Enterprise Manager 11 g Database Control from... began.
  ------------------------------------------------------------------
  Logs are generated in the /ora11gsoft/odb/OH1/WBH-DB1.wbtea.com_wbdata/sysman/log directory
  
  I try after the url in the browser firefox web
  
  https://WBH-db1.wbtea.com:1158 / em
  
  and I got the following error
  
  The secure connection failed
  
  xxx.xx.xx.XX:1158 uses an invalid security certificate.
  
  The certificate is not trusted because the issuer certificate is not approved.
  The certificate is not valid for all the server names.
  
  (Error code: sec_error_untrusted_issuer)

  Hello

  you are not missing anything.

  Business Manager works fine. Accept the certificate and press on continue button...

  Can you try running the same in internet explore also.

  Concerning
  Rajesh

• Oracle Enterprise Manager 12 c SGD Server does not start every time that I reboot

  Hello

  appreciate your help and your advice on this matter.

  I have a box of Oracle VM configured with windows 2008 R2 Server OS.

  Installed Oracle Database 11g, created a database instance and set the requirements to install more Oracle Enterprise Manager 12 c.

  Every time when I reboot my Windows Server 2008, I have a very hard time from the SGD server

  do a few permutations and combinations for the start of services and get the login page of EM 12 c

  Below error is more frequently encountered:-

  E:\EnterpriseMgr\middleware\oms\BIN > emctl start SGD

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Service Windows what oraclemanagementserver_emgc_oms1_1 could not be started

  Management Server Oracle is down

  Please see E:/EnterpriseMgr/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for the details of the error

  E:\EnterpriseMgr\middleware\oms\BIN >

  In the services I checked for all the permutations, (start the service automatically / manually / automatic with time delay, etc.) but no permit far.

  Can someone Guide please on a solution to this challenge.

  Before shooting the emctl above of the admin command. Prompt BACK, I always make sure to check the database and Stanley are running - connect to it and query.

  Oracleagent12c1Agent - is also started.

  Oraclee_enterp ~ 1_middle ~ 1_omse_enterprisemgr_gc_inst_em_emgc_oms1ConfigurationManager - started

  Oraclee_enterp ~ 1_middle ~ 1_oracle ~ 2e_enterprisemgr_gc_inst_webtierih1ConfigurationManager - started

  OracleManagementServer_EMGC_OMS1_1-> fails to start after several attempts.

  Also, I tried to stop webtier and restart who.

  emctl stop who and then run emctl start SGD

  This model was used to work earlier, somehow its not working as on this day.

  Technically, I'm not a database / Enterprise Manager Administration background - but an Automation tester.

  Try to explore the Real Application Testing and Test data management n hide the Packs of Enterprise Manager 12 c.

  Kindly help

  Kind regards

  Nayan Jacob

  ()[email protected]( )

  Hey Xaheer,

  It worked this time!

  Thanks a lot for a helping hand... Appreciate your prompt response and help to...

  one last thing, can you please suggest what might happen some possible causes of this repeatedly.

  I was faced with this problem for quite some time now and all costs of Reboot Server me almost 30-45 minutes trying to start the EM to get em login screen.

  Can I set up these services to manual start and follow it each time?

  E:\EnterpriseMgr\middleware\oms\BIN>emctl stop who-force

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Stopping WebTier...

  WebTier successfully stopped

  Stop at Oracle Management Server...

  Error: error at shutdown SGD. Please check the error and logs

  Please check E:/EnterpriseMgr/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log to erro

  Details of r

  E:\EnterpriseMgr\middleware\oms\BIN>emctl start from SGD

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Service Windows what oraclemanagementserver_emgc_oms1_1 started successfully

  Management Server Oracle is in place

  E:\EnterpriseMgr\middleware\oms\BIN >

• Oracle Enterprise Manager - do not start

  My OEM was in working condition, it stops working when I try to start now, it gives me the following message.
  

  -bash-3.2$ emctl start dbconsole
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 
  Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
  https://mehran:1158/em/console/aboutApplication
  Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed. 
  ------------------------------------------------------------------
  Logs are generated in directory /u01/app/oracle/product/11.2.0/dbhome_1/mehran_scba/sysman/log 

  Please help me solve this problem...

  Hello

  There are several errors found...

  Failed to start the HTTP LISTENER and

  Exceeded Max authorized data Upload - number of files: 519, data of the upload size: 20,047117 MB, Pct (%) disk used:7.15%, disabling of the collections (00852) 2010-10-18 14:57:12, 120 thread-1135905088 disable collector (00406)

  You can post the results of

  $ emctl staus dbconsole
  agent of $ emctl status

  If everything is running... and try to uplaod data manually using

  $emctl download agent

  If still problem persists... better if you reconfigure. OEM...

  http://www.akadia.com/services/ora_dbconsole.html