[SOLVED] W511 Windows 8.1 no plus no HDMI

Similar Questions

• W511 Windows 10 Technical Preview 0xc0000428

  Hi all

  First of all, I got this error: 0xc0000428 after my last Technical Preview of Windows Update a few days ago.

  It all started with not be able to connect or find any wifi at all.

  Now that the error does not, but during all the TS I now starts and says its done some modifications, it is said with a Windows warning window:

  "Windows is unable to complete the installation. To install Windows on this computer, restart

  installation. "

  So I guess the the smartest thing is to return to the window 8 new.

  Before I installed Windows Technical Preview that I made the backup of Microsoft asked,

  assume that it is this:

  http://Windows.Microsoft.com/en-us/Windows/preview-FAQ#FAQ=TAB0

  At least, it is in the installation steps.

  And this is how the file looks like:

  boot

  EFI

  sources

  Bootmgr

  Bootmgr.EFI

  reagent

  but there was NO any file installation or AutoPlay,

  so, how can I do this restore to Windows 8?

  I have already downloaded the site Web of Microsofts Windows 8.1,

  shooting these files:

  Autorun

  Setup

  And I put them as well as the backup, I created, added to the USB

  and has managed to startup, touchscreen, keyboard and mouse work, so I tried RE mode, or go

  Back to older tech preview 4, tried all options. but nothing works.

  Then I loaded the USB with the Windows 8.1 that I downloaded and this place starts.

  and it's getting ready to install, but the touch screen does not work,

  the keyboard does not work, the mouse does not work, so I can't click next to start

  installation.

  Same thing Windows 8.1 when I insert the USB with Windows Technical Preview.

  I can go into the BIOS with the lower Volume and the power button pressed together until the BIOS is displayed.

  It also runs Thouch.

  Any suggestions on what I can do?

  Zenpotter

  Hi kirankp25,

  Thanks for the reply.

  I solved it yesterday, I wrote the first time I had tried all the options,

  I thought, but my 15 year old nephew said that I did not

  the clean install, in which I did later, when the option of

  Remove the module from TPM - which is something about the possibility to encrypt your

  HD with bitclocker and so on, I removed it and everything worked.

  Not sure if it was possible without deleting it, in any case, now I still write on

  My W511 with keyboard.

  Looks like it works a lot better now, with Windows Technical Preview.

  It is probably Acer built the Windows 8 to work perfectly with this specific operating system.

  with installing custom drivers and so on. I guess you know what I mean!

  Thank you for this forum even exist.

  Zenpotter

• Database window: 'add a connection' (plus sign) gray - site ASP

  Hello

  I am trying to connect to an Access 2007 accdb file by using an ASP site in Dreamweaver CS5 on Windows 7 Home Premium OS (processor quad Intel i7 6 GB of RAM).  The plus sign in the database window is gray, without error message or explanation about the program.

  All the steps below "to use dynamic data on this page" have checkboxes next to them.  [1. create a site for this file.]  2. choose a document type.  3 configure the server to test site]

  I use Dreamweaver CS5 on Windows 7 Home Premium.  I am trying to connect to an Access 2007 accdb file.  I searched the internet far for some clues, but all the world assumes that the sign '+' is active and not greyed out.

  I created an ASP.

  View local: C:\inetpub\wwwroot\Website\

  Remote server / test: C:\inetpub\wwwroot\

  I tried to put the Access 2007 database these two places.

  I tried several variations where to put the local site, the remote server, and the test server on my computer and nothing seems to make any difference.

  I would fix a screen showing the sign more dimmed, but Adobe has temporarily disabled the file uploads b/c of some security concerns.

  I will be forever in your debt if you can solve this conundrum!

  Thank you

  ASP VBScript has not been deprecated in Dreamweaver CS5. It is still supported.

  ASP.NET and ASP JavaScript are no longer supported. They appear in the Server templates to allow developers to continue to work with sites created in previous versions of Dreamweaver.

  I'm not sure if Dreamweaver supports databases created in Access 2007. You may need to convert to use an .mdb file name extension. Also, see if the following help page: http://www.adobe.com/devnet/dreamweaver/articles/setup_asp_04.html.

  If this is your first foray into the development of dynamic websites, I feel obliged to say that the ASP is a very bad choice. Microsoft has stopped the ASP development about 10 years ago and is now all efforts for ASP.NET. Although many people still use with ASP, it is a dying technology. If you want to create dynamic Web sites in Dreamweaver, you'd be better off using PHP or ColdFusion.

• Problem-solving with Windows 8.1

  I just changed my HDD for one SSD and re-downloaded Windows 8.1 and I have problems with my resolution.

  It does give me only 2 options for resolution, 3200 x 1800 and 1024 x 768 (which it says is recommended). When I turn it to 3200 x 1800, everything is tiny.

  Where's my resolution (3840 x 2160)? Why is not just "an option? Any ideas on how to solve this problem?

  Install the chipset drivers first.  Then, restart and install the Intel video driver.  Finally, restart and install the nVidia Driver.

  All the drivers for this model:

  www.Dell.com/.../Advanced

• Don't throw Illustrator CC 2014 (could not complete the requested operation) even after the new installation (3 times), someone knows how to solve? (Windows 8.1)

  Hi guys, my CC 2014 Illustrator won't launch, receive an error message 'Could not complete the requested operation', this isn't a problem of specific files, I can't launch independent Illustrator.  I have uninstalled and reinstalled 3 times and contacted support, but they were not able to solve at the moment.  This is a relatively new 8.1 windows installation and none of the custom fonts have been added.  I tried to delete the preferences and launch files and which had no effect.  No idea what I can do, any help would be greatly appreciated.

  Edit: Forgot to mention that I also tried running Illustrator as an administrator and that Illustrator worked perfectly on this computer from the installation (about 2 weeks) before this started happening.

  Thank you

  Chris

  

  baglosh,

  You reinstall using the way complete three steps (the otherwise strange things may persist)?

  (Check the box to delete the preferences), run the clean uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• SOLVED: PC Windows 7 cannot access remote shares or the

  Head, meet wall. Wall, meet the leader.

  I have a W7/64 PC that cannot access network shares. He has been installed from the original CD (simple installation) but never worked. Resettlement is not a preferred option because the client already has tons of data and applications on it.

  Other machines can access the local shares of this PC, but it can access any remote shares (on any other PC W7) or his own - in short customer service around file sharing does not work properly, although this machine can see all available actions... She just can't access. Other PC can access machines that cannot do this. Ping works fine in all cases.

  "Remote machines appear in the list of"Network"in Windows Explorer, but trying to access them produces an error: the specified network provider name is invalid.

  No software anti-virus or firewall is currently installed or running.

  Troubleshooting output (the local computer is named GARRYDMK-PC):

  -[snip]-

  Trying to NET USE shares on the local computer:

  View C:\Windows\System32>net
  Server name remark
  --------------------------------------------------------
  \\SERVER
  \\DEREK-PC
  \\GARRYDMK-PC
  \\RECEPTION
  \\WAYNE-PC
  The command completed successfully.

  View C:\Windows\System32>NET \\garrydmk-pc
  Shared resources to the \\garrydmk-pc

  Share name Type used as comment
  --------------------------------------------------------
  Canon iP4200 print Canon iP4200
  Romeo & Juliet disc
  Shared disk
  Users drive
  VIDEO_TS disc
  The command completed successfully.

  C:\Windows\System32>net use g: \\garrydmk-pc\Shared
  The workstation service has not been started.

  More help is available by typing NET HELPMSG 2138.

  C:\Windows\System32>net start workstation
  The requested service has already been started.

  More help is available by typing NET HELPMSG 2182.

  C:\Windows\System32>net view \\server
  Shared resources to \\server

  Share name Type used as comment

  ------------------------------------------------------
  Disc of company Documents
  COMPUTERS-software disk
  The command completed successfully.

  C:\Windows\System32>net use g: \\\server\Company Documents.
  The workstation service has not been started.

  More help is available by typing NET HELPMSG 2138.

  -[/snip]-

  I'm trying to access here to all actions are available to all other machines of W7 in the network. (All machines are W7 boxes).

  Note how the workstation service is said not having started, but in fact has already started summer (which I checked in the list of services). In short, this does not appear be related to a service does not...

  I went through all the standard movements as posted on the Interwebs, including the verification of services, local policies, home groups, convenience stores, and which do not. Note that I tried to start the workstation service via a DOS box as an administrator; If I'm not I get a "system error 5 has occurred" and and "access denied".

  In short, I am completely puzzled. I start the troubleshooting of this PC, but now I want to just pull it. Please help before something bad happens... :-)

  Any suggestions would be greatly appreciated!

  FvW

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information is useful.

• [SOLVED] Backup Windows 7 gives an error message 'file ignored' for a subfolder that does not exist in Documents

  I am running with "Backup and Restore" backups in Windows 7 Professional and constantly get this error in the logs:

  Backup has encountered a problem during the practical C:\Users\Tim\Documents\Blender file backup. Error: (the system cannot find the specified file. (0 x 80070002))
  "Practical Blender" is a folder I previously removed documents and backup should not be looking for it. I tried to remove the job from the scheduled backup with Windows Task Scheduler and create and execute a new backup job, but the problem goes away. It is only this specific file gives me this problem. I deleted the other folders of Documents before and since it was started without any problem of backup.

  Is it possible that I can stop backup to find this file that does not exist?

  What happens when you recreate this folder?

• Connect a laptop running Windows XP to a LCD via HDMI

  Hello

  I did a fresh install of windows XP SP3 on my Sony Vaio Z series. I bought a HDMI cable to connect my laptop to an LCD (DYNEX 32 '') so that I could watch movies and so. Unfortunately, the LCD doesn't detect any signal from my laptop. Is there a solution for this problem... I have to install some driver or what?

  Please advice...

  Hello, mykhtarz

  Since you have made a new installation, it is likely, that you do not have the required driver installed software to automatically switch to the HDMI. I recommend first check with the manufacturer for updated driver software.

  There may also be a combination of keys on the laptop to change HDMI manually, usually a combination of # FN + F. You'll need to refer to the documentation of your laptop for which key can control the HDMI.

  You can also go into the display properties and change the default view for the HDMI. To check the display properties, follow these steps:

  1. Click Startand then click Control Panel.
  2. Click appearance and themes, and then click display.
  3. In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to designate as the primary monitor.
  4. Click to select the use this device as the primary monitor check box. Note that this check box is not available when you select the icon of the monitor that is currently set as your primary monitor.

  For more information, see the following link: How to configure and use multiple monitors in Windows XP:http://support.microsoft.com/kb/307873

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 for computer laptop TV HDMI not working not

  Acer Aspire V5-571P/64-bit. Was able to connect to the Sony TV with no problems until I recently updated for Windows 10 from 8.1 to win. Win 10, WinLogo + P displays the projection screen options, but any of these options to connect to my TV as I could do before the update.

  Downgraded to win 8.0 Intel VGA driver (v9.17.10.2828) but was still unable to connect. Win 10 did not allow the installation of Win 8.1 Intel VGA driver, even in compatibility mode.

  Can anyone offer any advice on what I have neglected or hurt? Thank you.

  In Win10, the screen of the computer seems OK? Device Mgr shows something unusual? It's a card intel.  Have you checked the site to intel for updates for your video card.

  Jack E/NJ

• Cannot connect Windows 7 pc to TV with HDMI

  just upgraded to Windows 7 from Vista.  I used to be able to connect using Windows Vista by connecting a cable TV on my computer HDMI laptop Dell xps.  This no longer works with Windows 7.  The operating system upgrade is the only change.  Sunday, he worked with Vista and Monday it didn't work anymore after the upgrade to Windows 7.

  Your best bet is:

  Click Start > Help and Support > Type, HDMI

  You will find the information you need, a piece of cake!

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Sony Vaio 2009 upgraded to windows 7 will not display full hdmi to tv

  I have a Sony Vaio windows 7 I bought in a pawn shop has a blu - ray drive installed inside 4gig and intel centrino 2 with gz 220 64-bit operating system. "Its fast and works well except when I plug my cable hdmi my40" Slyvania tv it shows nothing except my wallpaper not mouse. When I click on settings under my computer it will show that... All I wanted to do was watch a movie on my computer.

  I have a Sony Vaio windows 7 I bought in a pawn shop has a blu - ray drive installed inside 4gig and intel centrino 2 with gz 220 64-bit operating system. "Its fast and works well except when I plug my cable hdmi my40" Slyvania tv it shows nothing except my wallpaper not mouse. When I click on settings under my computer it will show that... All I wanted to do was watch a movie on my computer.

  Install the correct video drivers.  You can even have two different video chipsets in the machine.

• Satellite A300-203 - need drivers in Windows XP Home edition for the HDMI output

  Hello world!

  Given the poor performance of Vista, I decided to install XP on this machine. I installed all the drivers (from the Toshiba Site) available for my laptop XP, everything is a work, * but HDMI Out does not work *.

  I tried to install the driver Vista 'HDMI CONTROL MANAGER' (XP specific drivers for the hdmi not available on the toshiba support site). HDMI worked after that on my TV but then I got a blue screen, the operating system crashed. I decided to uninstall the driver again just in case.

  Is there a solution to get the HDMI out works under XP? A good pilot? Something reliable?

  Thanks for your help!

  Greetings from the Spain

  Hello

  My U400 supports HDMI port and I installed Win XP on it.
  I didn't install any control HDMI for Vista Manager
  It was not necessary!

  My Win XP is updated, I installed the graphics driver and all the other drivers, the tools available for Win XP!
  That was enough to get the job of HDMI

  You must ensure that your BIOS is up to date.
  In addition, you must install common Module utilities, controls and don't forget that your graphics driver is up to date!

  Then, you would be able to use the FN + F5 to switch to the TV

• Windows 7. PC to HDTV HDMI connection

  Several months ago, I have connected my PC to an HDTV via a HDMI cable. The computer has detected the TV and it was listed among my devices in the control panel. I selected "To extend these screens" and could spread on my PC and see it on my TV. I tried yesterday and could not use "extend these screens. HDTV icon went from "Devices" on the Control Panel, and a second for my computer screen icon on "devices". By selecting "Change the appearance of your display" TV is on the display list. The only one I see desktop on TV is to select 'show the office only on 1.

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to refer to the link below and check if this is useful:

  Connect your computer to a TV

  Hope this information helps.

• Windows stop DivX Plus Player when I try to start an imported video. Why? And how can I solve the problem?

  Windows stop the DivX Plus Player... See the title.

  Hello

  1. what type of video file?
  2 are you able to play other videos with success?

  I suspect that there is a third party application that is causing the conflict. We can perform the boot minimum troubleshooting to find the conflict.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

• How to change the e-mail servers in Windows Mail

  Original title: WINDOWS MAIL SERVER CHANGE

  I want to continue to use Windows Mail and changed their Web servers.  Can I configure live.com or gmail.com or yahoo.com as my mail server?  How?

  Thank you!

  I want to continue to use Windows Mail and changed their Web servers.  Can I configure live.com or gmail.com or yahoo.com as my mail server?  How?

  Thank you!

  For Gmail in Windows Mail:
  http://mail.Google.com/support/bin/answer.py?answer=86382

  For Windows Live Hotmail in Windows Mail:
  http://email.about.com/od/outlookexpressfreemail/Qt/Access_a_Windows_Live_Hotmail_Account_with_Outlook_Express.htm

  For Yahoo! in Windows Mail:
  You need to register at More than Yahoo! in order to configure in Windows Mail
  http://www.vista4beginners.com/Windows-Mail-Yahoo-mail-plus For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.