Cannot connect Windows 7 pc to TV with HDMI

Similar Questions

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• Windows cannot connect to the printer operation failed with error 0x0000007e

  Hello

  OS: Windows 7 x 86 SP1

  Print server: Windows Server 2003 R2 SP2 x 86

  Printer: HP LaserJet 8150 printer shared and listed in the directory

  Problem:

  When I try to install the printer in the Add Printer Wizard, choose install a network printer, she finds a driver on the server, installs, then brings up an error (see topic).

  In the Print Service logs, I see the following:

  "The print spooler failed to load a plug-in module, 0x7e error code. See the user context information for event data.

  I can install the printer very well if I choose local printer, new port, TCP/IP, and enter the IP address. This isn't a solution, as users cannot be expected to go through this process, or for me to go around all the machines and do it manually. More I want than the print jobs to the print server's spool, and I think that the local installation method uses the local spooler.

  I tried to install the driver of HP UPD PCL 6, x 86 and x 64, on the print server.

  When I check what the client machine pilot chose to install by going to the properties of the print server, I can see that he chooses the former driver "HP LaserJet 8150 Series PCL 6". I presume that it is incompatible with Windows 7, that's why I am getting the error cannot connect.

  How can I get Windows 7 clients to use the UPD?

  I left our Windows 2003 print server to a Server 2008 and comes to install the HP UPD x 86 and x 64 for each printer. Now everything works perfectly! All XP and 7 customers can install printers network without problem.

  I suspect that the problem was due to have many different versions of drivers on the old print server, and customers did not know which to use?

• Cannot connect Windows Marketplace error connection to the service.

  Original title: Cannot connect to Windows Marketplace

  When I try to connect, I get the following message:

  Error connecting to the service.

  There was a problem connecting to the Games for Windows - LIVE service. Click Retry to try connecting, or click on troubleshoot to attempt to diagnose and fix the problem.

  If you continue to have problems to connect, you may need to contact your ISP for assistance.

  I am able to use all internet services.

  Hi Torrey,

  I suggest posting your question in the games for Windows Live Marketplace forum located here:
  http://forums.Xbox.com/GFW/technical_support/marketplace/f/271.aspx

• Cannot connect Windows 7 to iHome iBT70

  I'm unable to connect my IHomeiBT70 to my computer. The wireless speaker is to connect to my laptop, but not with the computer.

  I can see devices in the bluetooth devices list, but when I click it, it gives me an error saying

  view bluetooth service Intel has stopped working

  Help, please

  Hello, NGO,

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use Bluetooth enabled on Windows 7 speakers, but I would like to learn more about the issue in order to provide you with better assistance.

  1. What is the brand and model number. the system?
  2. You did it any significant hardware or change software on the computer before this problem?

  The question may arise due to the incompatibility of the Bluetooth driver with the speaker. Then I suggest that you try the following steps Diagnostics to find out the root cause, apply patches, and check if the problem persists:

  Method 1:

  Try to follow the steps in the following link to resolve the problems with Bluetooth devices:

  The problems with Bluetooth devices

  (Note: article also applies to Windows 7)

  Method 2:

  If method 1 does not work, try to run the patch that is available in the following link and look for the question.

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396/en-us

  Method 3:

  Alternatively, you can try to check if the Bluetooth support service is running.

  1. Click Start, type services.msc in the Start Search and press ENTER.
  2. In the list of services, double-click the Bluetooth Support Service.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click on apply and then click OK.

  Trying to connect Bluetooth speakers with the computer and check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I did not write of wi - fi cannot connect windows

  I wrote not wi - fi cannot connect, I have windows 7 drivers on the router and the network card is reinstalled, but did not help

  Hi Anton,.

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not connect to internet. I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. What is the brand and model of your computer?

  
  

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Cannot connect Windows 7 to the field get error network path not found.

  Title: original network path not found

  I have a professional Windows 7 Desktop and Windows Server 2008 Standard server.  When I try to connect my desktop computer to the domain, I receicve an error "the network not found path.  I tried almost all of the solutions found for the search for this error without result.  How can I locate the source of this error and fix it?

  Hi ECBender,

  Thanks for posting the question in the Microsoft Community!

  You cannot connect to a domain and the message that the network path was not found.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• Cannot Connect to Host ESXi 4.1 with browser or Client VI

  Hi, I have a strange problem which has persisted since I first installed ESXi 4.1 on a server. First my setup:

  • ESXi Installable on a HP DL380 G6 server, 32 GB of RAM, 4xEmbedded NETWORK ports, Port NIC, 2 iSCSI x QLogic QLE4060C HBAs 1xDual adapter

  • HBAs configured for Jumbo and static IP frames but except that all the settings are default

  We have installed ESXi 4.1 with only the built-in port #1 connected to the switch. Everything went well and we were allocated the only active NIC (vmnic0) as the management interface. Once installation is complete, we were able to connect to the management interface using a browser and the VI client.

  We then connected NETWORK card and remaining HBA ports to the switch without loss of connectivity to the management interface. During our next restart we could no longer connect directly to the host using a browser or the VI client but could still ping the IP.

  We tried to restart the management agents, but it did not help.

  Here are the different startup scenarios, we tested and the results:

  Scenario #1 - Boot with built-in NICs, DP adapter cards, network and HBAs connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = NO

  Even if we try to unplug the adapter DP and HBA ports after starting we still cannot connect to the management using the Explorer or the VI Client interface. A reboot is required, and the script #2 or #3 must be followed.

  Scenario #2 - start with only the embedded and DP adapter NIC connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = NO

  If disconnect us the two ports of adapter DP we can then connect to the host via the browser or the VI client without having to restart. We can reconnect them and we continue to have access to the host, and everything is fine.

  Scenario n ° 3 -Boot with only the NIC integrated, including the Mgmt NIC connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = Yes

  Then we connected the DP adapter and the adapter port HBAS to the switch and all the connectivity was very good. This scenario is our solution for now.

  Other information

  The QLE6xxx ESXi module takes about 5 minutes to load during startup, when the HBAs are connected to the switch, but it loads successfully. Not sure if this is normal or not.

  Thank you in advance for your help!

  Paul

  This looks like a very unusual network for me configuration.

  Could you post a screenshot of virtual network configuration and add a few comments on the different configuration of the vSwitches and uplink connected.

  If I understand correctly that you have at least 3 vSwitches (management, virtual machines, and iSCSI), however, from what you wrote so far I do not completely understand how implement you.

  André

• 'Skype cannot connect' Windows issue 8

  Hello

  Recently, I tried connecting to Skype and it displays the error "Skype cannot connect. I am sure that my internet connection is stable, and I'm using the correct password because my Skype sign me usually automatically. I tried to update to the latest version, but also to remove Skype completely and put it back, once again, but nothing helps... Please help me!

  I managed to uninstall Skype forcefully to help uninstall software (my computer was not allowing me to uninstall the program correctly) and reinstall it again and who did the trick. Thanks for the help though!

• Cannot connect by Satellite P750 to TV via HDMI

  Hello

  I am trying to connect a Satellite P750 with Windows 7 to a TV via HDMI and have had no success.

  I tried without success to the following:
  1. I chose F5 function to extend the desktop with desktop + HDMI, but also just HDMI only
  2. I tried the windows P for the use of projector function
  3. I tried different TV including Panasonic and Sony Bravia
  4. I tried another HDMI cable, I use my Xbox with
  5. in the devices section, I can see the TV is added and tried to change the settings, without success
  6. when I looked online for a solution, a solution was to download HMDI Control manager.
  7. After installing it and when I tried to use it, I got the pop-up message "using the HDMI control, you must activate it.

  So I was wondering if the HDMI port is not properly enabled. According to me, he works one way or another, otherwise the computer would not be able to detect the TV when connected.

  Can you please offer any assistance?

  > 1. I chose the F5 function to extend the desktop with desktop + HDMI, but also just HDMI only

  And what exactly happens if you press Fn + F5?
  You see the Toshiba Flash Cards appearing at the top of the screen menu while pressing FN + F5?

  Please note that the output screen must be changed before you start to play a video.

  Right channel/HDMI port is chosen in the settings of your TV?

• Cannot connect Windows 8 to an older OS with homegroup

  Separated from this thread.

  It is very helpful, as most of us are either A: Trying to get windows 8 to connect to an OS or former B: trying to get an older operating system to connect to Windows 8. You guys is added a password of security for groups windows home 8 (initially known as the name of the Working Group) and that made it impossible for the older operating system to connect to the fact that they have no way to get that pass code. All I'm doing is part media and I have to play with the parameters left and right before my media suddenly begins sharing properly.

  And yes I did all this network sharing stuff. Turns up making even that sometimes doesn't work. I have the same problem trying to listen to music through my X - Box 360 and again once I play with the settings of the network of last 5 to 10 minutes before suddenly oh look at my music is streaming finally. From my experience with Microsoft trying to do anything about it either on your own home network was a royal pain, but at least with windows 7 and it wasn't to hard to fix. Now with windows 8, it became almost impossible to have another version of windows even work with windows 8 on the network.

  Of course, this is simply my own experience and one thing I've learned is that half computers running the same operating system with the same exact specifications there will not have the same correction. Towers of PCs have their own personality. That's why I'm happy that I came across this page turns upward to a mixture of tests with a lot of the suggestion realized that none of them have really explain why the network needs a lot of tinkering in the first place.

  Ideally, it should be as simple as crochet just your laptop to the network put a password and be good to go, but now it seems that I have to have passwords on top of passwords and have nothing to say in the matter, if I want to put all the passwords. Well, I managed to solve my problem for now until the next time I try to connect to another computer on my network.

  Of older machines MS can be connected so that you can see and file xfer.

  To do this, the connection is through the WORKING Group on the network connection.

  On the old machines go to system in Control Panel and change the name of default working something else as MY-WORKING group and restart this computer.

  On the newer machine who has Homegroup, do the same thing through the control panel and restart this computer.

  Now you have a private workgroup that you will be able to see all the machines via network connections.

  You may need to set up some of your folders on the old machines to share certain folders as shared on the network.

  Who should do as I have an old XP I use as a file server and a backup location.

• Satellite Pro L650-1LF - cannot connect Windows 7

  Hello

  I'm having a problem with my new Toshiba laptop and I thought that maybe someone here could help me. Sorry for my bad English: P

  My problem is that when I start my laptop (that I got today) I can't connect in the two options I have. There is the administrator account which acquires a password that I did not and do not know. the second option is "another user account", but it still says that I have the account user or incorrect password. I don't know what to do :(
  I hope you people understand my problem and can help me. 7 Professional Windows was already installed when I bought the laptop in an internet shop, so there are no cd or other software with it.

  Thanks for your help and I hope you have understood my problem :)

  Hey Buddy,

  You have created user accounts after installing Windows 7? Usually, if you buy a new laptop, recovery facility will be beginning and end. Then, you will be asked for user accounts and passwords.

  Anyway, an alternative you can try reinstalling Windows if no connection is possible. Just run the recovery of HARD drive feature (menu advance to boot Windows if you press F8, and then select Repair my computer).

• Cannot connect to share on another server with a short name only

  • We are having a problem with a SCCM server on windows 2008 R2 enterpeise and trying to connect to another Server 2003 \\aush-pen-xxx01\c$ and gets the error message the specified network name is no longer available. I can do a nslookup and ping the server very well. can map using the ip address and the fully qualified name fine. Can get to other thin servers. and also connect to other servers to the server aush-feather end. This works if the server, then it stops again. No errors in the event log. Tried to get other disks on the server and the same issue. I created another share with permisions for all and always the same question.

    Any ideas?

    • This is the C$ which is the part of the administrator and I can access other servers. I created a test share and get the same question even if share and security permissions are at the world. When I restart the SCCM server, it's good for a while, then I get the error again. I need for SCCM to access this share. Maybe some kind of smb or implementing caching perhaps?

  Hello mrdamo,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Thank you

  Marilyn

• Cannot connect Windows XP to the wireless printer.

  WINDOWS XP PRINTER WI - FI CONNECTION

  I have Windows XP Media Center Service Pack 3 OS that worked a HP Photosmart Plus B209 a - m with a USB cable.  Since I just bought a new laptop (Windows 7 Professonal OS) I decided to create a home network with a router Cradlepoint MBR 900.  The two laptops (XP and 7 OSs) were connected to the internet via the router with no problems.  Windows 7 Pro OS laptop is connected wireless to the printer Photosmart Plus, I had implemented as confiquiration wireless the printer first.  But the failure of the attempt to get the OS Windows XP Media Center to connect to the wireless printer.  During the installation process to connect the printer to the XP system wireless it asked me to choose which printer I wanted to connect to.  The Photosmart Plus printer was selected and visible, then I clicked Next.  Shortly after, a small screen appeared stating the "serscan.sys" file could not be found and I have to insert a Windows XP Pro CD to get the file or run the installer of this file.  This issue has occurred both when I tried to install it with the CD provided by HP and when I tried installing the HP download website.  All I have is a recovery for Windows XP disk provided with the laptop and not a CD Windows XP Pro.  What should I do to fix this?  Thanks, Lonnie

  Thanks, that was fast.  Please, let me make sure I have this correct.  First of all, I have two recovery disks provided with the computer, with Windows XP Media Edition and one for the drivers.  I should not use either of these disks, right?  If I had the previous correct answer then let me ask the following question;  When looking to borrow the disc should be Windows XP Media Edition or can I borrow any disk of Windows XP?  Kim Merci for your help continues.  Lonnie

  Lonnie,

  Before the hunting around for friends who might have a CD, do the following research.  For each of them, make sure that you have checked the search options in the 'Advanced Options' to

  • Search system folders
  • Search for files and hidden folders
  • Search subfolders

  Search your entire hard drive and both CDs you have to serscan.  Do not include the .sys at the end of the file name.

  Search for Driver.cab.  Report of the Office (s).  On your hard disk, you should find one or both

  • C:\Windows\i386\Driver.cab
  • C:\Windows\Driver Cache\i386\driver.cab

  You can also find these files on the "recovery disk".

  Report what you find, including locations of found nothing.  It is possible (but I don't think likely) you will find a file named serscan.sy_ - If Yes, include this information in your results.

  Or, if you want to ignore all this, you can download serscan.sys since my SkyDrive-->

  https://SkyDrive.live.com/redir.aspx?CID=18b259158254905b&RESID=18B259158254905B! 225 & Thierry = 18B259158254905B! 214

  The file should go to C:\Windows\system32\dllcache (a hidden directory) and probably in C:\Windows\system32 (I do not use this file, if it is not in my system32 folder).

  Or you can just save it to your desktop and "direct the Setup" it there (if you do this, check more later to confirm that he got into C:\Windows\system32\dllcache and if not, put a copy).

• Cannot connect Windows XP computer to the wireless router

  Original title: why did I have to disable my ethernet on my front XP computers connections all of a sudden they would connect to my wireless network

  I installed a new AT & T wireless router

  Only my Windows 7 laptop would connect to the new wireless router.

  For my XP desktop and the laptop I had to disable the ethernet connections [although no cable not connected] so that the wireless to connect.

  I did it on a whim after days of not being able to connect and many calls to support AT & T.

  Both computers have shown the presence of the network, had 4 or 5 bars and had the right key WAP.

  So what did this happen?  XP update?  Wireless driver update?  The AT & T router?

  I had the problem until I'm the new router, AT & T AT & T could find nothing wrong with the old.

  Their "solution" was to send a new router - Netgear v the Westell, I had for days of Bellsouth.

  Hello

  
  Have you tried to proceed as stated in my previous post?
  If you want to continue to launch other steps, you try to temporarily disable the firewall and check. Check out the following link.
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Note: on disabling firewalls, viruses, or malware can get into the system. After you complete this step of troubleshooting, turn on the firewall.
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then, the firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  Post back with the results.