[Solved] X121E not start after I spilled coffee on the keyboard :/

Similar Questions

• Spill coffee on the keyboard and now 3 keys do not work

  I spilled coffee on the keyboard. Now 3 keys do not work. What should do?

  Replace the keyboard.  There is nothing here that can be repaired by a user, and wild stories you see on the Internet about doing things like «put the keyboard in your dishwasher and...» "will not work.

• Do not start after having been arrested in the menu "alt + f4" in win7 64 bit for the first time

  I always stop the laptop from the start menu. But now when I stopped it for the first time by the "alt + f4" - menu, it does not restart. Or rather, it starts, but looks like the HARD disc spins down after a second or two, and he did not get past the first screen of boot of Lenovo. I can hit the ESC key to see the detailed (with RAM-tests and other) boot screen, but then nothing happens. I can't go in the BIOS or boot menu. And it does not start on a dvd of Win7. Any ideas?

  Sorry, apparently, that was my (Corsair F-Series 90 GB) SSD that suddenly broke down. I'm back to Corsair.

  Problem solved I guess.

• Portege M300: orange light flashes after spill coffee on the keyboard

  My friend got a M300 and hes recently was smart enough to reverse half a cup of coffee on his laptop keyboard. The first thing is that the laptop power not on at all even when plugged so it might be possible to defects. The weird thing is that the orange light for the socket ((deuxieme left) continues to blink slowly to me - any ideas on what this could mean?

  I havn't tried to clean the keyboard yet due to lack of a small enough screwdriver to unscrew, but because the laptop does not in any case, I think that the problem may be bigger than that. Is that what I can do with him or is it just a case of having to buy a new computer laptop coffee becaue is not covered by the warranty lol

  Any help would be appreciated, thanks J

  Hello

  I agree with Miro.
  The must be something wrong with the hardware. Code bilking isn't always the same. The orange light flashes different for different dysfunctions.
  The Toshiba service partner can read this code and then can give you a good answer on the blackout.

• Satellite Pro A40 does not start after water spilled on it

  Hello

  I have a problem with the laptop of my companion. After she pours water on her, she has stopped working (no surprise really lol). I took it to pieces, right down to remove the motherboard to try to find the fault. Now when the AC is connected and batt is in place, NIP of the led, same thing happens without batt.

  BUT the computer does not light when you press the power button. Im guessing that it is a hardware failure, since water isn't really best friend elecrtics, but I was hoping someone else might have other ideas/solutions?

  I searched the toshiba site and found nothing on this laptop.

  Any help is very appreciated!

  Hello Danny

  You are absolutely right. It's probably hardware failure and I fear that the motherboard must be replaced. I recommend you contact Toshiba service partners in your country and look for info on the repair and costs.

  Good luck!

• Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

  Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

  Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

  Hello
  To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P200D-130 does not start after upgrading RAM

  Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
  I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
  Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

  I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
  I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

  What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

  Thanks in advance,

  Michael

  Hello!

  I think that both modules are not compatible to the laptop.
  Normally you can upgrade your laptop to 4 GB. Look in the user manual.

  The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

  Good bye

• Satellite M200 does not start after the RAM 4 GB upgrade

  Hello

  I recently updated my RAM just to speed things up a bit as RAM is so cheap these days.
  I have a MEAC M200 T2130 Vista with 1 GB sticks (2 * 512).

  The new sticks are 2 * 2 GB Dane - elec DDR2 pc2-5300, when I put the two and restarted the hard drive light came briefly and then it is just options BIOS of Idol, no POST.

  I tried to use a single stick of 512 MB with two new sticks and they both work in a 2.5 GB configuration just not together that also this only works when the stick of 512 is in internal housing and not vice versa.

  So if someone has had a similar prob or can give me some advice that would be great, I'm not sure if the motherboard can support 4 GB?
  Thank you, Dave.

  Hello

  There are two possibilities why your M200 doesn't not start after upgrading RAM.
  First the RAM installed may be not compatible or could be faulty or the computer laptop doesn't support 4 GB of RAM.

  I put t know what M200 do you have exactly, but you can check the installed chipset and could check on the Intel page if this chipset would support 4 GB of RAM.

  Welcome them

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• Help my pc does not start after you have uninstalled the video driver

  Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?

  RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.

  http://www.computerhope.com/beep.htm

  If this post answers your question, click mark as answer .