Some applications of locking

Similar Questions

• Some applications won't work in Safe Mode

  Hello world

  I had a few problems with some applications for these past few weeks, they will start only when I'm in Mode safe. It's always the same applications, which include Spotify, Atom.io and website via Safari maps.google.com. I suppose that there is something that share these apps that don't deprive them start when I start my MacBook in normal mode.

  Things I've tried:

  -Reinstalled El Capitan, to the latest version

  -HDD completely wiped and reinstalled El Capitan

  -Delivered PRAM reset

  -SMC awarded zero

  None of these actions have worked unfortunately. What could be wrong here? Is there a hardware error?

  Kind regards

  Niels

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Some applications will not open on my Apple TV

  SOME applications will not open on my Apple Tv.  Updated to iOS 10 a few days ago and everything was fine.  Now, not a single application will open.   Tried to not restart, no luck.

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  4. Reset Apple TV (settings > system > reset > reset all settings)
  5. Restore the Apple TV (settings > system > reset > restore)

• Some applications (Soundcloud, YouTube, Tumblr and Instagram) are not to say that I have a wifi connection when I clearly one. Why is this and how do I solve this problem?

  As I said, some applications are not I have an Internet connection when I do really. YouTube and Instagram both of my loading workflow error messages, Tumblr went to appear in messages on my dashboard at least a week to not show anything on my dashboard and Soundcloud would not load completely. I tried to reset all my default network connections and had to redownload all apps - but who does more, and now I'm stuck being connected on all of them (with the exception of YouTube, which is back to square one (I think)). We are dealing with issues with low storage because of the cloud is all messed up, so maybe she's the one, but I'm not sure. Anyone could try to guide me through fixing this? Thank you

  Hey there dubstepspacecatjr,

  Welcome to the communities of Apple Support! From the sound of things, you experience problems connecting to the internet in specific applications on your iPod touch, such as YouTube and Instagram. You also tried to reset the network settings and reinstall applications, which are key steps in troubleshooting. I can certainly understand the importance of being able to access the internet in order to get most of these applications. I'll be happy to take a look at it with you.

  The first place wherever I would like to first of all is the use of this article:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  https://support.Apple.com/en-us/HT204051

  If you haven't already done so, good insulation should see if this connection within these apps problem persists when you use cellular data. In addition, check that you are able to browse and connect to Safari on your iPod.

  In addition, you do not want to look at the backup and restore of your iPod as a new device. From there, you can reinstall the applications and see if the same thing happens. This will help to rule out existing issues/corruption of software.

  The following items have the steps on how to create a backup in progress, but also to restore your device to factory settings:

  How to back up your device using iCloud or iTunes

  https://support.Apple.com/en-us/HT203977

  How to clear your iOS device and then set up as a new device or restore from backups

  https://support.Apple.com/en-us/HT204686

  Have a great rest of your day!

• The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Cannot scroll with the scroll on my mouse button in some Applications

  How do I can't scroll with the scroll on my mouse button in some applications? Happen for example when I tried to scroll my Lotus Notes e-mail messages. I was not able to scroll using the button on my mouse! Very annoying!

  Hi X04p2n! I had the same problem! I was not able to scroll with the scroll thing (dunno what it's called) in note either. Just, I went on the site and downloaded the correct drivers for my mouse and it works since.

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Some applications from the App Store do not launch

  Some of the apps I bought the App store do not start.  Most do, however.

  15/02/16 4:41:39.546 AM ReadKit [1105]: could not verify the signature of reception: no signatory valid

  15/02/16 4:41:39.549 AM storelegacy [372]: LaunchServices: received XPC_ERROR_CONNECTION_INVALID trying to map database

  15/02/16 4:41:39.549 AM storelegacy [372]: LaunchServices: disconnect the event received for service com.apple.lsd.mapdIs b

  15/02/16 4:41:39.549 AM storelegacy [372]: LaunchServices: mapping of database failed with result-10822, retrying

  15/02/16 4:41:39.551 AM storelegacy [372]: LaunchServices: received XPC_ERROR_CONNECTION_INVALID trying to map database

  15/02/16 4:41:39.551 AM storelegacy [372]: LaunchServices: disconnect the event received for service com.apple.lsd.mapdb

  15/02/16 4:41:39.553 AM storelegacy [372]: LaunchServices: disconnect the event received for service com.apple.lsd.modifydb

  15/02/16 4:41:39.554 AM storelegacy [372]: LaunchServices: disconnect the event received for service com.apple.lsd.modifydb

  15/02/16 4:41:39.556 AM storelegacy [372]: LaunchServices: disconnect the event received for service com.apple.lsd.modifydb

  15/02/16 4:41:39.557 AM storelegacy [372]: LaunchServices: disconnect the event received for service com.apple.lsd.modifydb

  15/02/16 4:41:39.559 AM storelegacy [372]: LaunchServices: disconnect the event received for service com.apple.lsd.modifydb

  15/02/16 4:41:39.561 AM storelegacy [372]: LaunchServices: disconnect the event received for service com.apple.lsd.modifydb

  15/02/16 4:41:39.000 AM kernel [0]: sandbox: storelegacy (372) deny (1) mach-research com.apple.lsd.modifydb

  Is there something I can do, or is this question of Apple?

  Hi Rory,

  Welcome to Apple Support communities.

  The article below provides information that can help you isolate and solve problems like the one you described, where some applications are not run on your MacBook Pro.

  Insulation in Mac OS X - Apple support questions

  Ciao.

• iTunes remove some applications

  I would like to delete some apps to iTunes. The applications are no longer on my devices. I saw something where you all delete and redownload them to my devices.

  However, my iPad is 32 GB (I know now I made a mistake and would have to pay $ 100 more than 64 GB) and there are a few applications that I want sometimes, like NFL apps, since the season is essentially over. I do not need/want them in the off-season. I want to install them again next season, where I will renounce some other applications. So this is the reason why I want to remove them from iTunes. But there are other applications where I no longer need them and I would remove it from iTunes. How can I go about deleting some applications from iTunes?

  Homepage: Mac Book Air (2013) OS X El Capitan, i7, 8 GB RAM and 512 GB Flash.

  Work: Windows Pro 64-bit 10. 8 GB of RAM, 250 GB Flash.

  Devices: iPad 3rd GEN iOS 9.2.1 32 GB; iPhone 5 iOS 9.2.1 64 GB.

  It comes from a recent thread of Knhaze (so I can't take credit for it).

  I struggled with this simple action for a good amount of time as well. If you are referring to the page that looks like this, you are in the wrong page to remove the apps.

  

  To remove apps on this page, you will need to head over to this icon

  

  From there, you can right-click one of the applications that you don't want in your library.

• y560p slidenav not to open some applications

  First of all, I'm not a person very computer savy so if my jargon is a little basic, I apologize.

  Some applications/programs that I put on the net asset value of slide in first (example: firefox, Skype, Word, mcafee). Then after a few minutes or so icons disappear and are replaced by an icon of paper & machinery that do nothing when selected. I would really appreciate help with this. Thank you

  System:

  Lenovo Y560p

  Windows 7 Premium

  Hi David,

  This section of the thread is on the model of Y560p but you listed drivers for Y560.

  Given that these two are entirely different models please make sure you use only

  the drivers appropriate for your machine, for example first Pointing Device Driver

  then all 4 .exe files for SlideNav, then power management driver!

  Please also uninstall old drivers first by "Programs and features" in the Panel

  Then, shut down and restart the computer before installing the new drivers!

  Y560p drivers & download...

  http://consumersupport.Lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=611900

  Zehn

• I do not know my windows XP has some missing components that some applications do not work.

  I do not know my windows XP has some missing components that some applications do not work. Backup and system restore Windows do not seem to work and when a portable device is inserted, an errror on windows message being don't appears not able to load the installer for the volume - anyone got any ideas on how this can be resolved?

  "SFC 3498 records" is something that the technical support engineers who are hired by Microsoft should download so that they can learn how sfc/scannow actually works rather than send people on wild goose prosecutions that will not work.

  Looks like you just download the first file in the list of files on my SkyDrive - look down the list for the sfcfiles.dll and download it.

  To fix your immediate problem, you need to download:

  Sfcfiles.dll

  And put it in the designated folders.

  If this file is missing, it is probably being quarantined (actually deleted) by your unspecified antivirus/antimalware software.

  If this is the case, AV software you are using is distressed and he can just delete it again.

• Impossible to uninstall some applications and games

  Original title: how to uninstall applications/games when I try to uninstall its not to uninstall...

  Hello people,

  I have an office with all the animals (games, apps) when I try to uninstall not uninstall itself.
  is it possible to uninstall...

  Best regards
  Manjunath Jayaram

  Hello

  Some applications have uninstall programs that will help you to uninstall this particular application. Contact the software vendor to check the availability of the uninstall for this application program.

  You get an error message trying to uninstall applications?

  Run the fixit in the link. Choose the name of the uninstall program:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  It will be useful.

  Need permission to move to programs

• After the removal of malicious software through the system restore, now some applications don't work

  Control Panel... Help and Support... do not work... I get this message on both of these and other:
  Rundll32.exe not found Application...
  When I try to access some also uses Open with open... This has not happened before... I think I lost something that needs to be restored... BTW I tried the system restore to get rid of malware... It worked (obvriously) but only up to a point... Now, some applications do not work...
   
  Thank you
   
  Elaine

  Then when you get your rundll32.exe work, follow these steps:

  Looks like your Windows file associations have to dispose. This means that XP is not
  know what to do with the files by looking at the file extension (for example, .exe for executables,
  .doc for MS documents, etc.).

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications.

  When I start my laptop I get "your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications. "and my laptop takes forever or does not open my programs. any help? Thank you.

  less than low disk space,

  What seems to be the case, it's that your windows is having a hard time resize its file for virtual memory.

  my suggestion is to remove "auto" at that time, and then set a custom format.

  I recommend that you set the initial size of 2 and max at 1152.

  Here's how to put a link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• Why some files are locked when scanning

  Why some files are locked during scanning. I use avg and scan of the entire computer. can anyone help?
  p.s., no other suggestions posted already worked.

  Ref: http://forums.avg.com/au-en/avg-forums?sec=thread&act=show&id=212602

  Please be informed that the locked files (files) also have access rights. If you run the command line scanning (or manual scanning of the AVG User Interface), it runs with the rights of the logged-on user. But to access some files (e.g. System Volume Information) you must have the rights SYSTEM (and similar).
  AVG scan on demand is executed with SYSTEM rights (under the SYSTEM account).

  • Locked file
    The reported file is locked, so cannot be scanned by me. Usually, this means that some files are constantly used by the system (e.g. swap file).