HP Deskjet F380 print really slow and ejects incomplete pages

Similar Questions

• HP Deskjet F380 printer shows "offline" and does not print.

  original title: have a HP Deskjet F380 printer stating 'offline' replaced new ink cartridge checked cable always in offline mode. Verified that the printer is not on the pause mode.

  Printer was working perfectly until I put in the new ink. Do check the cable (works well on a different printer). How can I get the printer to work again I'm using XP home. Checking the status of the printer and there is no tick etc. against the break point in the fax and Printers window.

  Hello

  Follow the steps in the link below and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=1128296#N71

• DeskJet 3700: DeskJet 3700 prints very slow

  Hey everybody,

  I just installed my 3700 DesktJet on my 10 Windows PC and it seems to print really slow. Any idea?

  Thank you

  Bill

  Hello

  I have experienced this problem myself.

  There are a few things you can try

  1. Check the type of default paper for the printer, go to settings, click on the print properties and make sure the paper type is plain paper
  2. Run windows update to ensure that you have the latest version of the printer driver.
  3. Take a look at this document (http://support.hp.com/us-en/document/c05272556)

  I hope this helps

• My Satellite is really slow and takes about 10 minutes to open a session

  Hello

  My satellite phone is really slow and takes about 10 minutes to open a session. It also takes awhile to open up applications in particular the internet. Once the internet is open, it takes a while to access the net. The application actually drags across from the scene and it looks like a curtain closing additional idling.

  Need help.

  Concerning
  Russ

  Hello

  Have you checked the CPU usage rate?
  Start the Task Manager and check if any strange background process needs the full CPU performance.

  I also recommend to check the laptop for some viruses and malware. These programs could make the laptop and the lazy BONE.

  However the portable equipment could bad work.
  You should check the memory using the Memtest86 program. It s freeware. Check the HARD drive for bad sectors and also try to defragment the HARD drive!

• SideWinder x 8 mouse. The games are really slow and jumpy.

  I just installed a Sidewinder x 8 mouse. The mouse works fine but when I try to play games that they are really slow and jumpy. They work fine when I switch to my original mouse. I have Windows Vista, my system processor clocked at 1.6 GHz and 1024 MB of memory. What should I do to get the games working correctly? The games I play are ones on King.com

  Hi Pod1987,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) you are able to play other games other than those of king.com online using your Sidewinder x 8 mouse?

  (b) what version of Vista are you using? (32-bit or 64-bit)?

  Step 1:

  For the 32-bit version of Vista. Download and install the software for the mouse Sidewinder x 8 on the site mentioned below.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=gaming&type=mouse&name=3HA-00001&OS=WVista_32&lang=en

  For the 64-bit version of Vista. Download and install the software for the mouse Sidewinder x 8 on the site mentioned below.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=gaming&type=mouse&name=3HA-00001&OS=WVista_64&lang=en

  Step 2:

  Mouse SideWinder x 8 if used to play the high end so games I suggest you to update the Flash player on the Web site of the Adobe Flash Player. Click on the link below.

  http://get.Adobe.com/flashplayer/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer is running really slow and guard same gel if I double click, it will do. I have windows 7 for home.

  My computer is running really slow and guard same gel if I double click, it will do. I have windows 7 for home.

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DeskJet F380 print only page 1 - only when the first powered

  I work under Windows 7. I checked the toner level - not low; cleaning cartridges does not help.  When the power is turned on, the first page prints ok, not strong. The following pages, it acts like it is printing but prints pages white, totally clean.

  Thanks for your suggestions.  I wonder if it's time for a new printer.

  Pablu

  Hi pablu,.

  Welcome to the HP Forums, I hope you enjoy your experience!
  
  I see you are having some problems printing with Deskjet F380.
  I'll be happy to help you.

  I would disable all the start up programs to make sure that something in the background is not cause printing problems.

  Go to start, run, type msconfig, click on the Services tab.
  Click to select the hide all Microsoft Services check box.
  Click Disable all.

  Click on the tab at the top of the page, select Disable all the startup, apply, OK and restart the computer.

  Temporary disable all Antivirus software.

  Then try to print again.

  You will need to go back and allow all when done and turn on the Antivirus software.

  Let me know how it goes and we'll go from there.

  Thanks for posting on the HP Forums.
  Good day.

• HP Deskjet F380: HP Deskjet F380 printer all-in-one.

  I need to know if it is possible to run my printer and a PC equipped with Windows XP.

  Or will I have to upgrade my PC?

  Concerning

  Pete Barraclough

  Hello @pbamachinery,

  Welcome to the Forums of HP Support! I see that you want to use your HP Deskjet F380 with your computer running the Windows XP operating system.

  No, there is no need to update the operating system, drivers and full software features are available for your DJ F380:

  HP Photosmart full feature software and drivers

  I hope this helps.

  Thank you

• My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

  I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

  Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

  Here are some instructions for uninstalling: uninstalling the printer software.

  You can download the driver here: Driver and software downloads.

• After the upgrade to firefox 9 it is really slow, and it freezes. Computer slow when I try to move my crusor. I use windows Vista

  I've upgraded to version 9.1 and it is really slow when I turn on my computer. 8 it charge it really fast... Now it freezes and when I move my mouse it takes about 1 minute before it will allow me to scroll to the top. One of my toolbar does not work now.

  My system is Windows Vista Home Premium
  Gateway laptop.

  Check if they have an updated version to be compatible with Firefox 9.

  Also make the suggestions mentioned in the following article:

  • Firefox takes a long time to start

  Check and tell if its working.

• What to do if the Ipad is really slow and unresponsive fast?

  My ipad is really slow, not in response to normal speed and lose battery charge soon as usual!

  CAN HELP SOMEONE, IT WILL BE APPRECIATED!

  Thank you

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  If you find my phone turned on, you can try to disable in the application of parameters to changes in performance seemif.

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.
  Good luck!

• DeskJet f380 printer suddenly stopped working

  My deskjet f380 suddenly stopped working with my computer laptop win 7 it shows offline

  Hello

  Have you tried to uninstall/reinstall the software?

  How are you connected to the printer USB or wireless?

• DeskJet f380: printer says offline when it is not

  I'm on windows 10 for more than 6 months, everything was ok until 2 days ago

  now my printer has started just saying printer offline when not.

  I can scan pictures ok, but I cannot print I am connected via laptop usb to printer cable

  and talk talk wi fi laptop

  I downloaded the program and it cleared the problem

  Thanks for your help

• HP DeskJet F380: HP Deskjet F380 print pages in the wrong order

  By printing on both sides manually, I often use odd/even pages options to print more quickly than the management of every page on its own. However, with this Deskjet, my pages and pages of documents THAT ALWAYS get messed up would be in the sequence of sequences in a weird order break; lose my ink and my papers!

  How can I fix it? This has happened far too many times

  Hi @Itsyvonnely,

  Welcome to the Forums of HP Support!

  I understand you have some problem with the pages print is not in order when you use the manual duplex function. I will definitely do my best to help you.

  What program are you printing from?

  Try to print a document duplex from another application.

  If you are using MS Word, I suggest you repairinging software, How to troubleshoot print failures in Word.

  To check the printer driver, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  To see if the driver software is up-to-date, d download and run The printer installation wizard The HP printer wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10. 

• Problems installing HP Deskjet F380 printer after installing Windows Vista Service Pack 2

  OUR SYSTEM: Vista Home PREMIUM "Service PACK 1, 32 - bit, WE installed Service Pack 2, after that, we try to download & install" HP Deskjet F 380 all-in-ONE printer, BUT could not because the installation not completed & failed.

  Original title: having the problem after installing Service Pack 2

  We recovered our system to 'Out of BOX STATE' MEANS that WE BECAME NEW SERVICE PACK 1, WE SUCCEED to INSTALL OUR HP Deskjet F 380 & work properly, YESTERDAY we RECEIVED THIS YEAR IMPORTANT UPDATE IS AVAILABLE THAT IS "Service Pack 2 (KB 948465).

  Please notify can DOWNLOAD us & INSTALL SERVICE PACK 2. WITHOUT OUR INSTALLATION OF THE

  HP Deskjet F 380.

  YOUR ADVICE WILL BE VERY MUCH APPRECIATED

  Hi man chic,

  1. This only happens when you try to install the printer HP or with other programs?

  Step 1:

  Before you install Windows Vista SP2, uninstall completely printing software.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  After installing SP2, try to install the latest version of the drivers available for the printer and the printer and check if it helps.

  Links of HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=14481&LC=en&DLC=en&CC=US&OS=2093&Rule=13237&Product=1128296&sw_lang=

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.