Some applications play with headphones, and some of them play in my speakers. Cannot change the default playback of helmet device.

Similar Questions

• No HDMI Audio, could not play the test tone, cannot change the default playback device

  Hello, I have real trouble with my HP Pavilion dv6-2160us experience (with the i3 - 330 M, no dedicated graphics card) Windows 7-64 bit, SP1 PC and I would be happy to help.

  I created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what has worked for them, nothing has worked for me.

  The problem (s):

  My main problem is that I can not any audio to play from my PC to my HDTV HDMI.

  When I plug my HDMI cable on my PC and the TV, the TV is recognized in the playback devices, but nothing he can play.

  When I try to test the TV in playback devices, I get an error "could not play the test tone.

  In addition, I want to mention a few other odd behavior that I think can be a part of the main problem.

  In playback devices, I can't change anything. I can't disable or enable a device, I can not set as default playback or communication devices, and I can't save changes to the properties of the device. Whenever I try to change something, as the default playback device, nothing happens, or the changes are immediately reversed.

  The Question:

  How can I get audio to play through HDMI on my PC (is not a problem with the TV, my other machines HP audio playback over HDMI it is fine)?

  What I tried:

  I tried:

  • Change the default playback devices, which I am unable to do
  • The utilities of reading Audio de Windows 7 running in a clean boot state
  • Uninstall and reinstall the driver Intel(r) Audio display
  • Uninstallation and reinstallation of the IDT High Definition Audio CODEC
  • Uninstall the IDT Audio PC program under programs and features
  • Disable the IDT High Definition Audio CODEC

  Nothing has worked.

  The drivers I have are the latest issued by HP

  How can I get this to work? I would appreciate help.

  I'm at the point where I'm willing to try solutions quite technically involved, so feel free to post those.

  Your expertise is greatly appreciated.

  Thank you.

  OK, I finally have the answer for that.

  If you experience this problem even and you want to fix it, you'll need a PC running the same version of Windows 7 that your PC works lot of work but it works without problems, with regard to this point.

  Here's what I did to solve the problem:

  1. Create a system restore point.
  2. Run regedit.exe as administrator.
  3. Go to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices \Audio .
  4. Compare the permissions and attributes of ownership of this key and all subkeys to your work PC.
  5. Change all permissions and property attributes for interest on the defective PC keys as they are the same as those on the operation of the PC.
  6. Restart your faulty computer.

  I hope this helps. It worked for me.

• Contact quick tasks cannot change the default application

  I've set up the quick tasks contact for text messages, but accidentally chose the stock default e-mail instead of handcent app.

  Is there a way I can change it back, or at least that he can ask me whether the app I want to use for e-mail?

  settings > applications > manage applications > menu all > scroll down to text messaging > on > then to clear the default settings

  now ask it which application you want to use again.

• HP pavilion dv6 laptop a bit of sound with headphones and others through speakers

  Running windows 7 64 bit. The problen started when I installed TeamSpeak 3 ideas?

  OK guys, I guess that I fixed it!

  Right-click its button on the taskbar > playback devices

  You now have the speakers and headphones selected as the default device and communication as peripheral selected default communication helmet.

  All you need to do is helmet communication made a right click, and then click on disable.

  And Voilaaaaa

  Check it out here too

  http://www.7tutorials.com/how-change-default-playback-recording-audio-device

• Change the default audio device and the recognition of the application

  I'm new to Vista (home premium w/sp2) and I am confused by works the assignment of default device (control_panel-> sounds), specifically the device change with existing applications (running).

  I change frequently between the speakers and the headphones - however, the change of output device is not recognized by running applications, such as iTunes or Firefox and will not be recognized until I have completely quit and restart the application.

  Why?  It is extremely annoying and incoherent other well educated such as Mac OS X platforms.  I would just like to change the default audio output device, on the fly, without the need to restart applications.

  I do something wrong or Vista offers this functionality to the end user?

  Thank you!

  Hello Wyntr,

  Thank you for using the Microsoft answers Forum.

  Currently, the function of switching between audio output devices is carried out manually. To make the selection, you can click the sound icon in the taskbar, then click the button at the bottom of the volume control Mixer. In the properties of the volume, you can click on devices in the upper left corner and select the appropriate device to make it the default for applications open from then on.

  Let us know if this can help, or if you have additional questions on this subject.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the 'open with' default application in OS 10.7.4 Lion for CS applications

  When moving to a new version of an application, I would like to continue the default 'open with' on the previous version. It helps to smooth the transition.  I am currently working with CS5 and CS6 applications. Access the palette 'info' of a file (photoshop, illustrator in design,... until now...) and try to switch the default 'open with' to CS5, but it does not work. He continues by default to CS6. Suggestions please?

  If you open Bridge and click on Preferences/editing/files Healt, you can set the default value for what you want.

• How can I change the default Google search engine in Firefox 8 Google.com to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want responses based in the United Kingdom.

  How can I change the default Google search engine in Firefox 8 Google.com to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want responses based in the United Kingdom.

  I use XP Pro.

  You can find on the site of Mycroft Project search engines.

  • http://mycroft.mozdev.org/
  • http://mycroft.mozdev.org/Google-search-plugins.html

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• With send and track online, I do not receive email notification when the recipient downloads

  With send and track online, I do not receive email notification when the recipient downloads. I can see real activity sent cloud files screen, and the "Notify" box is checked, as it should.

  Hi paulb57108117,

  When the recipient displays or download the document you will get the notification into account Adobe send & Track Document Cloud Help | With the help of Adobe Send & track.

  Kind regards
  Nicos

• How can I change the default font for some a keyboard?

  I have English and Cambodian keyboards installed, when I switch to Cambodian, happening to Cambodian police,

  However, I would like to change the default Cambodian police who switches to. Where is this setting stored? Maybe in the keyboard

  file or in the registry? I edit the keyboard file or just a registry setting?

  Thank you very much

  Hi Stephan,

  Thanks for posting your query on the Microsoft Community.

  According to your request, I wish to inform you that there is no specific settings of default font to installation for different keyboards.

  However, you can change the preferences on your keyboard by pressing Windows + space on your keyboard.

  For more information about the issue, please follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/install-or-delete-fonts

  For any question related to the Windows operating system, feel free to post on Microsoft Community.

• Change the default value of some columns in an oracle 11g table

  I have a table called cust_file, its table consists of a large number of columns (one of these columns called cus_tax) and have a lot of data.

  I use oracle 11g, I want to change the default value of the column cus_tax is equal 1.

  I wrote

  ALTER TABLE cust_file MODIFY (1 by DEFAULT cus_tax).

  
  

  Table changed
  

  
  

  but after I inserted new data to test the operation, I found that the new record has a value = null for the column cus_tax

  
  

  then I tested it using the following query

  
  

  Select data_default in the all_tab_columns where table_name = 'CUST_FILE' and column_name = 'CUS_TAX ';

  no selected line

  
  

  so please help me to change the default value of the cus_tax column.

  
  

  
  

  Thanks for any help.
  

  
  

  
  

  > but after I inserted new data to test the operation, I found that the new record has a value = null for the column cus_tax

  If the INSERT included a NULL value for the column, the GET of a NULL inserted by default substitution.

  SQL > create table hkc_test_10 (id_column number, data_col_1 varchar2 (5), data_col_2 varchar (5));

  Table created.

  SQL > insert into hkc_test_10 values (1, 'First', 'F');

  1 line of creation.

  SQL > select * from hkc_test_10 by 1.

  ID_COLUMN DATA_ DATA_
  ---------- ----- -----
  1 first F

  1 selected line.

  SQL > alter table hkc_test_10 change (data_col_2 default 'TRUE');

  Modified table.

  SQL > insert into hkc_test_10 values (2, 'Second', NULL);

  1 line of creation.

  SQL > select * from hkc_test_10 by 1.

  ID_COLUMN DATA_ DATA_
  ---------- ----- -----
  1 first F
  2 second

  2 selected lines.

  SQL > insert into hkc_test_10 (id_column, data_col_1) values (3, 'Third');

  1 line of creation.

  SQL > select * from hkc_test_10 by 1.

  ID_COLUMN DATA_ DATA_
  ---------- ----- -----
  1 first F
  2 second
  3 third TRUE

  3 selected lines.

  SQL >

  Hemant K Collette

• I need to change the default 'open with' Bridge of photoshop to photoshop CC 2015.  How do I do that?

  I need to change the default 'open with' Bridge of photoshop to photoshop CC 2015.  How do I do that?

  Hi karen,.

  It can get a bit tangled. Bridge delay normally to some think the Finder is the default, and every OS has its own way for you to tell the OS what you say should be the default value. On Mac, it's in the file information dialog box. I think that Windows called something like properties. You can change an extension to open all files with an application in your operating system first, restart Bridge and see if she pays tribute to this choice by double clicking on a file and observing that it opens the right version of PS. normally, it will be. (By default) must also appear after this choice in the list open with contextual (right click on the file you want to open, select open with and find the name of the application in the list).

  If this does not work, you will need to manually choose your file association for the extension of the list next to him in the Bridge preferences > File Associations. Which is normally necessary only when you want to override the default choice of your OS System. For example, maybe you want to bridge to open in PS JPEG files when you double-click it in Bridge, but if you double-click on a file in the Finder/Explorer JPEG, you want to open with Viewer of this system. It will not say it is (by default) in the pop-up list more, but bridge will honor your file associated with the choice of your system.

• A friend has two email addresses and want to change the default.

  A friend has an e-mail address main iCloud on his iPad, but does not know the password. We were able to remedy this and would like to change the e-mail addresses of the main one at the secondary level, which will make the default secondary image and the other main. In other words share the default email address now to make the secondary image by default, but always use the Mail app. The secondary address is Heaven who use Yahoo, so I use the drop-down list that appears in the settings and shows Outlook, Yahoo, etc, and select Yahoo, which Sky use themselves.

  She is an old lady who received his iPad by one of his own earlier, but which had not been deleted and no matter what, the settings are between the Member of the family. This lady is getting used to the use of Mail so prefer to stick with it, otherwise it will be the site of the sky and relearn how to Sky/Yahoo. I suggested to contact this member of the family, but I was told not to remember the password.

  I thought the reset of the iPad to remove anything to do with iCloud, but that has not worked. We went through iTunes and put his email address of sky (high school) there, he took, but that has not changed anything either. We managed to change its ID Apple logging in details to the new email address and password, then thought that the rest would be child's play, but no.

  Am I read and try to redo too to make the sky main e-mail address and a default? should I just use the menu drop down and select Yahoo?

  She doesn't have a clue on how to do these things, because it is very well a learner, this is why I am trying to help and think all this happened not knowing the password Apple ID.

  You are confusing two different issues. To change the default email in Mail and also talk with iCloud? While she may be the same as his Apple ID email address, the Apple ID itself does not affect the Mail application.

  Make Yahoo default email address and use iCloud are two totally different issues.

  So to answer the question of the Yahoo email to make the default account, you must ensure that it has been added to the iPad.

  Go to settings > Mail, Contacts, calendars > add account (unless the account is already here)

  Then scroll down on the same page and look for default account, type the following and change to any email address you want by default

  You can also delete unwanted emails in this same settings pane accounts by typing the address of unwanted e-mail and stitching remove account, or disconnection, if it's an iCloud account.

  If you did in fact change to iCloud account, the changes may not take effect until you log out, then back to the iCloud account.

  Hope this helps

• How to change the default properties of the Apache plugin and machine names

  Hello
  
  Two questions:
  
  1. How do change you the computer name (under services/servers too)? My problem is that I have a big cluster running on Amazon EC2, and when I add them to the Hyperic they use the FULL, i.e. "ec2-XX-XX-XX-XXX.z-X.compute-X.amazonaws.com" domain name I then manually change them to their real domain name. This involves a LOT of steps. Anyway to do this more effectively?
  
  I just tried to change the db directly, but this does not seem to work. (Tables: eam_server, eam_service, eam_resource, eam_platform).
  
  2. How can I change the default settings for the Apache plugin? I run Debian for PID and Exec locations are different than the default values. I was not able to find these values by default in server locations or the agent or the database anywhere.
  
  Thanks in advance!
  David

  Hi David,

  > Hi,.
  >
  > Two questions:
  >
  > 1. How do change you the computer name (in the)
  (> services/servers too)? My problem is that I have a
  > large cluster running on Amazon EC2, and when I add
  > to Hyperic they use the FULL domain name, i.e.
  > 'ec2-XX-XX-XX-XXX.z-X.compute-X.amazonaws.com '. I have
  > then must manually change their actual
  > domain names. This involves a LOT of steps. In any case to make
  > this more effectively?
  >
  > I just tried to change the db directly but does not
  > seem to work well. (Tables: eam_server,)
  (> eam_service, eam_resource, eam_platform).

  I don't know a smart way to do it. As SIGAR determines the hostname by OS specific functions based on the NIC main automatically, it is difficult to manipulate the configuration.

  >
  > 2. How can I change the default settings for the Apache plugin?
  > I run Debian for the locations of PID and Exec are
  > different than the default values. I could not
  > find these default values in the server or the agent locations
  > or in the database anywhere.

  Hi, it is possible. Search the apache - plugin.jar in your directory of the HQ Agent and extract to a folder. Then unzip it with jar - x
  Modify etc/hq - plugin.xml and look for the DEFAULT_PIDFILE property. You will find an example for Apache ERS product that looks like this.

  
  value = "logs/httpsd. PID "/ >"

  Copy of your Apache (1.3,2.0 or 2.2) of the article and adapt it to your needs, for example:

  
  version = "2.0".
  include = "1.3" >

  
  Class = "Apache20ServerDetector" / >

  
       
     

  
        
  Description = "Server MPM" / >

  
  value = "/ var/run/httpd." PID "/ >"

  
   

  After that, recreate the jar with jar - c and spread the new jar file to your appropriate HQ server and directories of agents HQ.
  This solution has some disatvantages, for example, if you are upgrading your versions of the Agent and the server.
  If you a familiar with the development of a plugin you can create a plugin for Apache specific Debian and preconfigure all of your values.

  >
  > Thanks in advance!
  > David

  Hope this helps
  Mirko

• change the default location of the application

  I installed an SSD and put my system on it. I don't want not used for applications or documents. How can I change the default values of systems use applications and the doc in my HARD disk drive?

  If you move the Applications folder on the SSD, then this means that your applications load more slowly. Leave it where it is.

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.