Some functions do not work after reinstalling the OS on Tecra S1

Similar Questions

• Qosmio X 770 - 11 c - some things do not work after reinstalling Win 7

  I just had windows reinstalled to correct some problems with the connection to a MAC mini server.
  But some things do not work as before:

  The USB 3.0 port does not work.

  FN key does not work (if you press FN and Z I used to get a toolbar at the top and then be able to change the lighting of the keypad)

  Toshiba Eco isn't here

  ETC., essentially all the toshiba Add ons/programs delivered pre-installed.
  I need to intall all drivers and is at - it somewhere I can get them all in?

  Thank you very much

  All Toshiba drivers can be downloaded from the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?

  You will find common Toshiba drivers and all the special tools and utility that must be installed to get all the extra features portable works correctly.

• Satellite M30-S350. Fn keys do not work after reinstalling the operating system

  I reinstalled the system on my laptop and now the Fn keys do not work. How do adjust me them? And yet... How to disconnect the touchpad?

  Hello

  It seems that what he is an American unit and was designed specially for the American market.

  But have you used the Toshiba Recovery CD?
  If this isn't the case, then you must install all the drivers Toshiba and utilities in the correct order.
  Chipset utility
  common modules
  graphic driver
  etc.

  The FN keys supports different function. To use these options, you will need several drivers. For example, use the FN + F5 (the display switching), to the Toshiba Hotkey Utility to display the devices & Toshiba display device change Utility and toggle the Touchpad to install Toshiba Touchpad enable/disable utility

  As you can see it good drivers are needed. Please visit the Toshiba us and download the right driver for this laptop

• Libretto W100 Bios + some drivers do not work after reinstalling Win 7

  I bought the w100 and I love the thing to death.
  Had no problems with it until Saturday, to make a long story short, I reinstalled win7 on it, the wrench was found under the battery.

  Win7 installed ok, but I had a few problems with the software booklet *. Firstly the bios has been 'not supported', as was the PC health monitor.
  I finished installing anyway, and most importantly, it seems to work. A bit slower than before, I'm guessing because of the bios.

  It's the same material, nothing has been changed, even the same win7 (Home premium), so I wonder what I did wrong here.

  I tried to reinstall three times and no luck.

  Oh, and I just noticed that the "auto rotation" is not no longer works.

  If anyone has had similar problems, and you have a solution?

  * All booklet drivers have been downloaded here:
  http://at.computers.Toshiba-Europe.com/innovation/JSP/supportMyProduct.do?service=at (I used my series to find the correct drivers)

  Hello

  You have reinstalled Windows 7 on a normal Microsoft Windows disk?
  May I ask why you do not use the Toshiba recovery media?

  With respect to the rotation of the display, I started another thread that may be useful for you :)
  http://forums.computers.Toshiba-euro...ThreadId=57977

• WiFi does not work after reinstalling the system

  I have Pavilion dv6t - 6 c 00. I had to reinstall Windows 7 due to a virus. After installing all the drivers available from hp.com for my model, everything finally works but Wifi still does not (network controller shows lack driver even after I tried like 8 different). Here are the technical details:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Appreciate any help. Thank you!

  Hello:

  Download and install this driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• Fingerprint Software will not work after reinstalling

  I've uninstalled and reinstalled the fingerprint, version 3.2.0.341 reader - 20/04/09.  When I try to register a fingerprint, I get the message "Fingerprint Registration: FPApp.exe - cannot locate component" saying "this application has failed to start because css_banner.dll is not found.  Reinstalling the application may fix this problem. »

  I have re-installed, choose the repair, but I still don't have the error.  However, I see css_banner.dll in \Program Files\Lenovo\Client Security Solution.

  How can I solve this problem?

  Update: I uninstalled the 3.2.0.341 version and installed the version 3.2.0.116.  I have the same problem.

  I solved the problem: I had to fix the Security Client Solution.

  I noticed that if I tried to open the Client Security Solution, I had a similar error on css_banner.dll is not present, message followed by a message CSSLauncher.exe has encountered an error and that it would be closing.  So I decided that since the css_banner.dll belongs to Client Security Solution, it was logical to try to reinstall or repair the application.  I downloaded version 8.2 of drivers and software, and it offered a choice of "repair".  After the repair, my request for fingerprint reader worked.  I've updated the fingerprint reader to the new version of the 20/04/09 3.2.0.341 and it seems to work very well.

• vCenter WebClient does not work after changing the field of vCenter Server

  Hi all

  I had to migrate my vCenter to a new domain. This migration is smooth without any problems. Everything works fine.

  Now, some of my colleagues need to use the web Client and I discovered, after to be authenticated successfully to the web server,

  I have an error message:

  Unable to connect to vCenter Inventory Service - _ https://vcenter._olddomainname: 10443

  Thus, even after reinstalling the Web server on my vCenterServer (version 5-update1) component, it always uses old domain information.

  I can't find where to change it.

  Hope you can help me with that.

  Thanks in advance,

  Frank

  Have you tried to run the command as shown in register.bat

  http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-9C65879E-7442-46E2-9A20-A858B2800D12.html?

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.

• The index of the table of contents, search, does not work after hosting the files published in HTML5 Multiscreen

  I generated and publish files for html5 multiscreen. The default screen layout is Desktop_layout. When I go to index.htm directly from the published location, functions and details work perfectly. However, once I host the files published in IIS, type the URL in Google Chrome, the screen layout is all messed. Table of contents, Index, glossary, and the search function does not work. Please help/suggest/guide.

  Maybe this related to IIS? I host locally on IIS (8.0 8.1 Windows Pro) and Apache without any problems. But IIS can give wrong if the folder security options are not set correctly, then check that the IIS user owns the rights to complete reading on all directories and files.

  Kind regards

  Willam

• Transition from tables to call a library function does not work after the application builder

  Call a DLL with function of library to call that requires a data table to work properly in Labview, but after building an exe with the application generator, the call no longer works.  Dereferecing the pointer in the DLL returns all values 0 and not the real.

  So finally figured it out.  It seems that you cannot use the utilities of pointer in an exe built such asGetValueByPointer.xnode.  Once I replaced the calls with calls to DSNewPtr and MoveBlock library, everything works as expected.