Sony DSC-S500 6MP digital camera does not

Similar Questions

• my memory card for my digital camera does not work when I put it in the memory card slot

  I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

  Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
  then
  Device Manager
  Expand portable devices
  the type of memory card slots should be listed if your type is a yellow triangle in it,
  Right-click on it and choose uninstall.
  It should reinstall it automatically or when you put the memory card in the slot.
  This type of fault is often caused by not using material on the taskbar does not safely remove request.

• KODAK EASYSHARE M583 14MP digital camera does not work with Windows 8

  Come on MICROSOFT... why you can't find a solution for this problem... What is a camera if you can not use it with your computer... In fact, I have two Kodak digital cameras which I can't use.  You have any suggestions on how to make it work with Win8...?   I hate hate hate Win8.  Why do we consumers to buy new products so they will be compatible with Win8.  If you can not say... I'M REALLY UPSET!

  Original title: Kodak Easyshare M583

  Hi Ellen,.

  Please answer these questions to help you in a better way:

  (1) was this camera photo works well before on any Windows OS to the previous address?

  (2) what exactly happens when you connect this unit to your computer Windows 8? Windows 8 detects the camera without any problems?

  (3) you have the KODAK EASYSHARE software installed on Windows 8? If this isn't the case, then you have the CD for this?

  The Windows Compatibility Center indicates that the Kodak EASYSHARE M583 14MP digital camera is compatible with Windows 8. Please click on this link for more information:

  KODAK EASYSHARE M583 14MP camera digital compatibility with Windows 8

  KODAK EASYSHARE Software, which are used to transfer the photos to the computer is no longer available as a download in the KODAK Web site and also either provide live assistance for this software.

  Even if you don't have KODAK EASYSHARE Software, installed on your computer, you can still transfer the photos from your camera to the computer without using this software. You can visit the KODAK below Support Article:

  How to transfer images from the camera to the computer without EASYSHARE Software

  Hope it will be useful. Please get back to us with updates.

• Digital camera does not load on laptop.

  When I plug my digital camera into a usb port on my laptop, it recognizes the camera but won't show the screen asking me what I want to do with photos. It has worked before, but now I can't load my photos. What can I do?

  With the camera connected, download and run the Autoplay Repair Wizard . Boulder computer Maven
  Most Microsoft Valuable Professional

• IV had windows 7 put, but my motion camera does not work

  I had windows 7 put on my sony vaio, but my motion camera does not work, anyone got any ideas

  You will need to download drivers from the Sony site for your laptop model and operating system (they cannot support Windows 7).

  I hope this helps.

• HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  all I need is someone find my phone on the Sony site and that will be a pretty

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=home&PRODTYPE=24

  go to this site and to detect my model (vaio only)

• camera does not turn on

  I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

  The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

  Note: The charging light turns off, charging is completed.

  If the camera does not turn ON even when the load is in progress, the service is required.

  You can initiate the service from the link below:

  https://eService.Sony.com/

  You can also contact our telephone support or Chat to try additional troubleshooting procedures.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

  If my post answered your question, please mark it as "acceptable Solution".

• Updated to IOS 9.3.5 camera does not work on iPhone 6 Plus

  Hi just recently, I've updated the iOS software on my iphone 6 and then I noticed that the camera does not just black screen in Meanwhile appeared when changed to video work the two camera when choose photo camera does not however any idea how to solve this problem

  You see a black screen or a closed lens

  If you see a closed lens or a black screen when you open the camera app, try the following steps:

  1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
  2. Force the application to close, then open the camera again.
  3. Restart your device, and then open the camera again.
  4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.

  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

• Click camera does not

  Hi all

  I have a 6s model 64 GB iPhone.  For some reason, the click of the camera does not work when you take a normal picture.  If I have a filter or change a square photo, click works fine, its only when I use the photo without filter mode.

  I tried reseting all settings, by turning the lock/keyboard click and outside and adjust the volume of the phone, it just seems to not only work in the scenario above.

  Any ideas on how to fix or is this a known bug?

  Thank you

  Paul

  Hello, you can try to do a hard rest before to backup your data.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• Camileo S10 camera does not remember the setting of the image stabilizer

  Hello reader Forum,.

  Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
  I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

  Greetzz... Ben

  Hello

  This could be possible.
  I remember that the focus does not work if the stabilization has been activated
  So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

  Welcome them

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

  I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
  I checked the drivers and they work, I have 10 Diretcx and it works.

  When I open the camera program, it works well.
  I put the camera program is not at initial start-up of laptop.
  I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

  Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  Hello

  > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
  You should check if the webcam has been chosen correctly in Skype video settings.

  If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.