WRT310N everything is connected, but no flow data...

Similar Questions

• When I connect my hotmail account, I can't open any folder, the Inbox, the new message,... everything seems normal, but when I click on something, it isn't responding.and it doesn't see the error.it works very well in internet explore.

  When I connect my hotmail account, I can't open any folder, the Inbox, the new message...
  everything seems normal, but when I click on something, it isn't responding.it works very well in internet explore.

  I think the next thing to test would that interfere with Add-ons. Disables the Firefox Add-on - Add-ons that only list compatibility with Firefox 5, but some add-ons could cause problems.

  To test, the simplest method is to restart Firefox Safe mode.

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See your backup information. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

  Then, try help > restart with disabled modules > continue in Mode safe (do not check the boxes). This article gives more information on the options and features of Safe Mode: Safe Mode.

  What is fix? If so, you may have to disable some add-ons.

• My computer motherboard laptop disappeared. Connected my hard drive to another laptop but still, no data is found, nor my hard drives are detectable? Very depressing and need the data. Help, please

  My laptop broke down (motherboard, Gone) and is not repairable. The technician took my hard MovieFrame and there is a very important document that I need very badly. I bought a proper case and connected my hard drive to another laptop but unfortunately no data can be found, nor my hard drives are detectable? I am very depressed and need the data. Please helllllllllllllllllllllllllllllllllllllllllllppppppp

  Hi Adel Bushager,

  I suggest you contact the store local tech or the manufacturer of the system to help with recovery of data from the hard drive.

  Hope this information is useful.

• Since the last 'upgrade' my iPad does not connect to my Bluetooth from Sony speakers.  I restarted everything.  I have not matched the speaker, and then paired again, nothing. The iPad said they are connected, but not sound and the machine keeps spinning.

  My iPad mini links is no longer in my Bluetooth from Sony speakers since the last 'upgrade' to iOS.  I rebooted the iPad.  I unpaired and repair the speakers.  Showes Bluetooth as connected but the train continues spinning saying: it is always looking for devices even though it says it has paired with speakers.   Any suggestions?  and Yes, the volume is rising.

  Tap settings > general > reset > reset all settings and restart your iPad then re "pair" speakers.

• My laptop shows connected but wireless "no Internet" - HELP!

  I'm on Win7 Home 64-bit edition. I am normally connected by wireless internet. However for the reasons today, I couldn't access the Interior.

  My wireless connection shows that I am connected. However, it also shows the status of 'no Internet' and I couldn't access the internet, well. I tried diabling and then allowing the wireless connection, but the problem persists.

  Please help, all...

  Hello

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  -------------------------

  In genral.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration. Jack-MVP Windows Networking. WWW.EZLAN.NET

• L2TP VPN connects but won't see network drives

  Hi all

  I just got a MacBook Pro with El Capitan. I joined it to my area of work and I have implemented SonicWall VPN Client Mobile and I tested it on and it works - only if my network, I am connected to and the VPN will not have the same IP range.

  I would like to use the integrated VPN L2TP client, but I have questions here. I have configurted on my Dell SonicWall and connect this VPN from a remote location, it will connect and show the data transfer (sending / reception are green) but I can not access my network drives.

  Once I have switch back to Mobile Client VPN SonicWall, everything works well.

  Any idea?

  Routing on L2TP or PPTP will probably work or at all, if both ends of the VPN tunnel terminate on the same CIDR network block. Which is why people never give a one VPN server address local 192.168.1.0/24. the network block is much too common. Please use something in 10.x.x.x.

• 63 error to TCP connection open in Simple data Client.vi when connecting to the network storage device.

  Hello

  I tried the simple data client and simple example of data server. I tried this example to connect to a NAS device. My laptop properly communicates with the device since I ping the address of the NAS device and discovered it works perfectly fine. Also, I put the static IP of my pc even as the NAS. So everything I've done. But when I run the program giving the ip address of a NAS device, it shows an error 63.

  Error 63 to TCP connection open in Simple data Client.vi

  Possible reasons: LabVIEW: serial port receive buffer overflow. = LabVIEW: the network connection was refused by the server.

  Why is happening. What can be done to solve this problem. Thanking you.

  vindsan wrote:

  What is the firewall of the SIN.

  Yes, it is very likely. Try disabling the firewall and try again. If the code works when you run the Server & client on your machine, but not when you run the server on your NAS and client on your machine (assuming you have entered the correct port for the NAS server), then it is very likely to be a firewall problem.

  vindsan wrote:

  Server that is listening is no longer VI also means what.

  Your VI server listens only once for a connection after receiving an incoming connection (or it expires after 60 years), he stops listening and the port will be more open for incoming connections - you must re - run the VI for another connection. With your code, you must run the VI server and then run the VI client in the 1960s, so it's not expire.

• Computer shows it's connected, but unable to connect to the Internet

  Original title: also connected but unable to connect

  I have a HP Pavilion a1710n 64 Dual Core Processor running Windows Vista Home Premium.

  The computer shows that I am connected to the internet, but I can't connect to IE or firefox.

  My Internet Protocol Version4(TCP/IPv4) properties shows that the two buttons marked for obtain an IP address automatically as well as the use the following DNS server address.

  My network card is NVIDIA 10/100/1000 Mbit / s, and the computer shows that it works correctly. I tried to do a back roller and re - put to date but still the two marked buttons.

  Large number of background information...

  I was trying to understand why the windows installer did not work on my son's account. I went in systems and changed to start and automatic manual. Rebooted PC and the firewall do not come. Tried to do a restore, but failed and lost all my restore points.

  At this point, I lost my internet connection to know after vainly trying to figure out the problem I contacted an ATT(my internet server) of things ATT me had to do was change the properties to get the use of a DNS server address automatically and had typing me the address. After reviewing the many things ATT concluded there was not a problem with my connection and the PC is configured correctly and suggested that I should speak to technical support and of course, it was not free.

  Tech support determined there was something that crashes me to connect to the internet and had run me malwarebytes. He detected 24 traces of adware and 2 traces of a virus in the registry database. I deleted everything and still no connection to the internet. Next Tech had me run Combofix and says everything should run fine after that. Still no connection to know Tech # 3 had executed me guests of orders with ping commands. Finally, he had me check the auto config button and that's where I discovered the two buttons were lit. Tech said "can't be." Well it is. That's when I tried to roll back the driver, but no luck so tech says only option is to restore the whole system.

  GRRRR... After several internet searches that I'm about to do except nothings saved and whenever I try to use my backup and restore fails.

  Any help would be appreciated. I'm still fairly new to PCs so please be patient with me. Laughing out loud

  I know that my options have been counted, I was able to save what was important and made a full system recovery. I am happy to say that I'm back on the internet.

  Thank you very much for your help and support. I learned a lot on my computer, as well in location wonderful are the microsoft forums :)

• Satellite A-C50-1KQ - WIFI is connected but no Internet access

  Hello!

  Today, I bought a laptop TOSHIBA SATELLITE of C50-A-1KQ and my problem is:

  When I am connected to my Wlan status says I'm "connected" to the Internet and everything is ok, but I don't have an Internet connection. With a cable, everything is ok, but not with Wlan.
  My driver for the card is 10.0.0270 (17.10.2013).

  Can U help me pls?

  Siana

  When you open option networks make sure airplane mode is set to OFF, Wi - Fi on IT and I guess that your WLAN is also in the list.
  You have the signal full force and the State connected?

  What happen when you try to open a page in the Web browser?

• Equium P200-1IR - wireless is connected but cannot access the internet

  Hi there,

  Need a little help!

  I just bought an Equium P200 1IR.
  I activated the wi fi.
  I see my router which is Talk Talk.
  Can I get the laptop to connect to the router and it says I'm connected,
  However I can't access the internet.

  I tried the same process by inserting a WiFi dongle into the USB port
  on the laptop, and exactly the same thing happens.
  We have other home computers that connect to the router and the internet
  OK using the wireless dongle.
  I plugged a rigid cable between the laptop and the router connection and I can't
  access the internet immediately without any problem, however, would be delighted
  to use the wireless function.

  Any help really appreciated... Thank you

  Waynec

  Hello

  Try please reboot your router. A few weeks ago, I had a similar problem with my Satellite A300. WLAN is connected but Internet was not available. After the router is restarted all of a sudden everything was ok again.

• I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Program network networking Internet website website URL website network

  I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Help!

  Hi Barry,.

  MSE is not the cause.  I suspect two things.  One, some ports in the firewall must be enabled to access the internet (your ISP should be able to tell) or you use a wrong port which is not activated, while the is correct.

  Second, you set up like a dial instead of a connection to the local network through the router (which must also be configured and secured if there is no wireless capability), and then the LAN must be connected to the internet.  Essentially, your network configuration is incorrect and must be corrected.  As a general rule, all you need to do is contact your ISP technical support and if you walk through the process over the phone.

  That's how I would handle it because even the experts here is perhaps not able to determine the appropriate settings for your ISP gave your versions of Windows and brands of routers and modems (and everything that needs to be connected).  They lose your business if you can't connect, and they have people who simply as for a life - often 24/7 - they are generally useful and really good in this.

  If that doesn't work (and I bet than that), and so that I could take you through it here in general with more information about your hardware, OS, ISP and other, this is the wrong forum for this.  You start here: http://answers.microsoft.com/en-us/windows/forum/networking?page=1&tab=all&tm=1300700638376.  Near the top, select your operating system from the drop-down menu to access the appropriate forum for your system.  Then post here like you did here, but give them all the details (manufacturer, brand and model of computer, network equipment, your exact version of Windows, what browser you are using and your network configuration).

  Good luck

  Kosh

• OfficeJet Pro 8600: connected but cannot print

  We just moved our office and have a new WIFI configuration. At our previous location, everything worked well, but since the move, a computer will not print from any application - Pages, Word, Email, etc.

  We have two Mac wireless connected to a printer, and both seem to be successfully connected. Both are able to print pages and information via the HP utility test, but as I said, one of the computers is unable to print documents from applications. (The other computer prints just fine.) When you attempt to print the HP icon in the dashboard shows a red dot with the number 1 in this document, as it should be, but after a few seconds him point disappears and nothing prints. Of more blue light that is supposed to be on when it is connected to the WIFI isn't on.

  I tried to resolve this all day with no luck. I couldn't find anything in the forums that helped. Hoping that someone has had a similar experience or a few ideas. Thank you.

  UPDATE: just in case someone having a similar problem, see this post.

  I uninstalled the driver on the computer that gave us wrong then reinstalled version fresh and everything works as it should. Don't know why I didn't try it earlier. Well.

• HP Laserjet M452dn: M452dn Ethernet connected but do not print

  Win10 Pro x 64.

  Printer connects / impressions via USB but not via a direct Ethernet connection or through router.  Connection to printer Ethernet is not but installation disc is located by HP print and Scan by IP addfress doctor. Doctor says software not installed then DLs and installs the software - but still does not print.  Uninstalled and did the all over again: ditto. If again, doctor without uninstalling it (still) says not installed software - although it said it was installed before I ran it again.

  Router/printer Ethernet connection is good (fire port on) and the IP displayed on the printer screen, so I guess that the connection of the cable Ethernet/is OK. Network/print sharing enabled residential group. Utility of Windows/HP ID troubleshooting any problems.

  Something else I could try.

  Thank you

  Monk

  Hello @Hmonk the printer has two ways to be connected but we really recommend use one at a time if you are going to perform a network first installation you want to make sure that you have an IP address from the printer connect the network cable to the printer room will get internet brand of course, on the port on the back of the printer when you have connected cable has a green and the orange light and then go to the menu reports on the printer and print a configuration report right on the 1st page under product settings, you will find IPV4 you must subsequently make the installation at this time where everything you want to make sure, is that the IP address of its different then 0.0.0.0 or 169.254.XXX.XXX since these combinations indicates that the printer its does not properly connect to the network

• My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

  My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

  original title: internet connection.

  Hi vonhatten,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you try to connect to the internet?
  3. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?