Sony DVD + R accucore incompatible with Small Business server 2003
These DVD works on any computer with XP or Win 7 or but not on a server running SB 2003
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads
Tags: Windows
Similar Questions
-
T200v server with Windows Small Business SERVER 2003
Just ordered a server TS200v, can I install Windows Small Business SERVER 2003 on this server, or do I have to upgrade to Windows SBS 2008?
Hello
SBS2003 is not officially supported, I think that 2008 alone is. You can try but might be a problem with some drivers.
J.
-
Unable to join 7 Pro to the Small Business SERVER 2003 domain
So far, I was unable to join a new Pro 7 laptop running an existing Small Business SERVER 2003 domain. Whenever I try to use:
http://servername/ConnectComputer I get a 403 http error and that it points to an IIS issue, but I can't seem to find a way to work around this problem.
Then I tried to go through the system properties and computer name change and join. Then, I get a message "cannot locate the area." I tried to use the FQDM, only the name of the server, the domain name under the extension, and nothing works. At first, I thought it was a DNS problem, but, I ping the name of the server or any other computer by name, with no problems...
Don't know what I'm missing here, but if anyone can shed some light on the situation, it would be greatly appreciated.
Thank you
Mark,
If you'd want to repost your question on the Forums Technet MS, one of SBS experts it would be better suited to provide you with a solution. Thank you!
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I just got a complaint from someone saying that the guest account takes more time and more time to log the area.
We have a number of XP machines and a couple of Windows 7 machines at the reception (to give the impression that we are a company thinging before - you know the kind). In any case, everything is controlled by a Small Business SERVER 2003 for the integration of Windows 7 machines is that a bit of a botch as well as group policy is concerned.
The fact is that in my diagnosis, I noticed that the guest account is only given a temporary profile whenever someone connects to use it (it is used for the interviewed work if they need Internet access for some reason any). Thus, the profile is deleted from the registry and comments folder is removed from C; \Users as soon as they log off. This was brought to the head when I tried to add a printer to the guest account and could not see all of the printers listed in the AD.
Is this a normal behavior, or does all the weird sounds you? It also works with XP in this way?
Thanks for any input and comments.
Angus
Hi siham,.
Welcome to the Microsoft community.
I suggest you to report the issue to the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro
Thank you.
-
Dell PE 1950 and loading of Small Business SERVER 2003
Recently bought a Dell PowerEdge 1950 off Ebay for a training machine. Also bought a few books of MCBS Server 2003 and Small Business Server 2003. I try to install SBS on 1950, but it does not recognize the RAID. I have a USB floppy drive I could load with F6 drivers but can't seem to find just the Perc 5 / I drivers. Site Web of Dell gives only a Setup driver that wants to install the drivers on my laptop when I use it. Could get only the drivers for a PERC 5 / I integrated. My Service tag #
maintain the label removed by privacy policy > I tried a server assistant open gale who would have worked very well, but it doesn't have the SBS2003, only Server 2003 list that does not work either. Thanks for your help You need the "hard drive" (ZPE) version of the driver, and you have to run the EXE file to extract the files before using it:
http://downloads.Dell.com/FOLDER97889M/10/DELL_MULTI-DEVICE_A07_R211422.exe
In addition, you MUST configure the RAID in the CTRL-R utility until all discs can be seen by the operating system, even with the correct drivers.
You realize that Server 2003 will be end of life in less than a year, right? Why the push for 2003 training? You would be better off learning from 2012.
-
ICW fails to configure the firewall on Small Business Server 2003 R2
Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map
C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
The call for initialization of device Upnp () returned ok.
Error 0 x 1 returned by the call to HttpGetDeviceXML().
Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
Call the GetServiceConfigURL for WANIPConnection () returned ok.
Router supports WANIPConnection
Service config URL ctl / http://192.168.1.1:5000 / IPConn
Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()The call for initialization of device Upnp () returned ok.
Error 0 x 1 returned by the call to HttpGetDeviceXML().
Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads
-
reinstalled Windows Small Business Server 2003 and Intranet failed during installation
I had to reinstall Small Business Server 2003 and I can't after setting up where Exchange, etc. are installed. It passes through Exchange perfectly and blocks on the Intranet tools on Disc 3. I use the "fixed" CD because the 3 original drive was corrupted when we bought SBS2003. Our version is the original pre-service pack 1. Is there anyway to download a disk image 3 where my disk is damaged? It seems good, no scratches, scratches or dirt.
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later. We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).
Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)
- Small business, fewer than 10 users.
- Don't use do not Exchange or IIS part included in SBS 2003.
- I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003
Hi copenetadmin5,
Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.
SQL Server forums
http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/
Nice day.
-
Pix 501 for Small Business SERVER 2003 configuration problems
I am new to cisco equipment. My company recently purchased a firewall of Pix 501 unlimited number of users, it is connected to an internet connection by cable with a dynamic ip address. Internet works fine and so the dhcp server.
I have a Windows 2003 Small Business Server on our network. I need to configure the firewall to forward ports on the SBS server for remote web workplace.
Also about a week ago I lost connectivity to the GUI of PDM via my web browser. Telnet and console work perfectly well.
I enclose my config file.
Any help will be appreciated. Thank you
Ed
FIRT off, you do not have a group-access instruction set for one of your ACL. This means that you have blocked all inbound traffic. You also have your incorrect static instructions. You can start by cleaning your config and enter the correct commands, you should be able to stick to your firewall config mode:
No list will host 192.168.1.1 acl-enabled access 192.168.1.1
no access list acl_outside not allowed tcp any any eq www
no access list acl_inside not allowed tcp any any eq www
no access list no incoming icmp permitted any one
No list of permitted no inbound tcp access any host 24.50.241.113 eq https
No list to access acl - permit gre 192.168.1.1 host 192.168.1.1
No outside_in not allowed access list tcp any host 24.50.241.113 eq www
not static (inside, outside) tcp interface www SBSServer www netmask 255.255.255.255 0 0
not static (inside, outside) tcp interface https SBSServer https netmask 255.255.255.255 0 0
not static tcp (exterior, Interior) interface www SBSServer www netmask 255.255.255.255 0 0
not static tcp (exterior, Interior) interface https SBSServer https netmask 255.255.255.255 0 0
static (inside, outside) tcp 24.50.241.113 80 192.168.1.69 80 netmask 255.255.255.255 0 0
static (inside, outside) 24.50.241.113 tcp 443 192.168.1.69 443 netmask 255.255.255.255 0 0
access-list OUT-IN permit tcp any host 24.50.241.113 eq https
access-list OUT-IN permit tcp any host 24.50.241.113 eq www
allow to Access-list OUT-IN a whole icmp
Access-group OUT-IN in interface outside
What ip you are trying to access your pdm of? the looks of configuration http correct, unless your coming to one other than 192.168.1.x ip address
Let me know if it works
-
The Hard Drives on Windows Small Business Server 2003 upgrade
I have a Small Business 2003 Server with RAID 0 with two drives hard exisitng 160 GB. I want to update the server space and replace the two hard disks to the existing with two new drives of 1 TB. I have a picture of the existing and once the new disks are set up, I would like to upload this image to the new. I would appreciate help on this topic, since this will be my first time upgrading. I think I should mirror the exisitng, remove these 160 HB disks and install the two new drives in their place without touching the RAID configuration, or I have to go in the RAID controller and let the controller to find them. then, use a startup disk to point to the image on an external USB drive and let the RAID the rest? I'm on the right track? Help, please.
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Cold clone P2V Windows Small Business SERVER 2003?
Hello
Our small business runs a windows server sbs 2003 running exchange and the domain controller.
I read on the forums that it is not recommended to P2V one domain controller and I know to do a conversion, while the host is running, causing errors. But what could be the problem cold cloning the machine and then initialize in esxi? I do not understand the consequences, should not simply be like turn the physical machine and the new? I don't see myself messages in forums to say "don't not P2V a domain controller", but I have not seen someone tell why and if they do hint only 'hot cloning. "
(Sorry if this sounds ignorant, I'm not much more than a windows guy and would prefer not to have to do a full migration if I have to).
Thank you, any help is great
Still, it's true that it's a good idea not to do a P2V of a domain controller... But if it is the only one, and if you do it in a cold way, and if you remember to start with the right time/clock... so you can try the way.
The other solution might be using Microsoft documentation how to an SBS SBS migration (to migrate to a new SBS in a virtual machine). But isn't very simple
André
* If you found this device or any other answer useful please consider awarding points for correct or helpful answers
-
Small Business SERVER 2003 cannot send e-mail to some areas
my client have an Exchange 2003 hosted locally on a SBS Server 2003.
This exchange server already in production for more than 1 year and so far works great.
until this Monday, found that it is not able to send e-mail to certain domains, emails are stacked in the SMTP queues.
That's this issue only affected an area, which including hotmail & yahoo.
This client is still able to send an email to my area of the business & that's why my butt is now on fire: P
NDR that the user has received are:
It is a State that is automatically generated delivery Notification.
THIS IS A WARNING MESSAGE.
YOU DON'T NEED TO RESEND YOUR MESSAGE.
Delivery to the following recipients has been delayed.
usersname@hotmail.comand
Your message did not reach some or all of the intended recipients.
Topic: TOPIC; Society
Sent the: 25/07/2011 12:59
The following recipients is not reachable:
* E-mail address is removed from the privacy * 27/07/2011 13:07
Could not deliver the message within the specified time. Please start again or contact your administrator.
We have checked on diagnosis MXTOOLBOX blacklist for SMTP, port scan, open relay... all the results are good.
Nslookup from this Exchange to the most affected recipients are good
also making sure the DNS server and the configuration of the exchange server are all properly configured (inspected by our Exchange technology specialist)
In addition, had checked the server event log and restored the firewall policy ISA 2004 back to April backup (to eliminate the possibility of problems in the firewall rules)
tried to restart the exchange services, flush DNS, restart the server, but no improvement at all.
I saw the mail server that cannot send e-mail to all the oubound field, but not this case (e-mail out toward areas little stacked in the SMTP queues)
Exchange Server forums:
http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/Windows Server forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
I got a new server and the server only supports the SBS 2003 R2 and more. I have tried slipstreaming drivers and all that already, without success. I have SBS Server 2003 Standard now with 15 CLIENT access licenses. If I buy a copy of SBS 2003 R2 on ebay to get the installation done, Microsoft requires new or different CLIENT access licenses or licensing of the R2 or 2003 SBS CAL upgrade existing will be sufficient? Any info would be much appreciated!
Thank you
You can find the Windows Server on TechNet support at the following address: http://social.technet.microsoft.com/Forums/en/winservergen/threads
-
Connection to Small Business SERVER 2003 VPN
Hello
I am trying to connect to a SBS 2003 R2 through the VPN server.
-Firewall remote (server side) is set to "Pass all"-online port 1723 and all others are open
-Local firewall (on customers) are disabled
-J' tried with stations W7 SP1, HP and XP Pro SP3 W7 SP1 Enterprise-online same result
-J' tried 2 different networks customer-online the same result
-RRAS is configured through the task list using PPTP and L2TP (pre-shared key)
-Remote Acess strategy has been configured to allow users of Mobile
-J' tested access with a user in the Mobile group and with administrator-online same result
-Windows authentication (no BEAM)Configuration and using PPTP, I get the error 807 (immediately disconnected VPN)
When the configuration and use of L2TP, I receive the error 789 (in negotiations)However, the following services remotely works very well (even with the active firewall):
-Remote Desktop (RDP) on the server
-Webmail
-Web remote access (https://site.name.domain/remote)Could you please help me solve this problem?
Thanks in advance.Hello Athena,
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:
http://social.technet.Microsoft.com/forums/en-us/categories/
-
How can I get out what uses port 80 on Windows Small Business SERVER 2003
Hello
We install a new CRM system, that links to an external site, on our SBS 2003.We are told that for the link to work we must have free port 80.Tried run netstat - and it makes account of nothing - and a few other programs - and they bring nothing - but running ' telnet 192.168.2.2 80 "at the command prompt an error.Apparently, this means that something else IS using it, according to the support team who install the software.
Can anyone help!AlanHello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Maybe you are looking for
-
perfect strangers (people standing or sitting in the background of an image that I took) are appearing in my list of people and there is no obvious way to get rid of them.
-
Re: Satellite X 200 - recovery restores all partitions?
Hello, my computer is a 200 X with 1 HARD drive. I had a system restore CD, and I would like to know if system restore only my C: or restore my C: + my D:? Thank you
-
HP Envy 17: Clean install Windows 10 without upgrade.
Hello First of all, I am very happy with my new HP laptop first, it's amazing! Now my problem. The laptop came with 8.1 Windows preinstalled with a free upgrade to Windows 10, however, I want to do a clean install Windows 10 without going through the
-
WAG300N reduced downstream?
Suddenly, I noticed that the connection state are showing in lower approval rates. My in Internet is a 20/1.5 Mbps and I used to read about that, but now it's 'only' 12/1. I tried to change the WAG300N with the Zyxel 660 H original, and it shows at f
-
Wmplayer.exe in list of logon process and slow down my computer automatically
Hello! All the minutes (and it can happen several times in a minute or two, then accompany minutes nothing happens) my mouse freezes and my computer "thinks" for a few seconds, as something that four-color or trying to open, only nothing is. I opened