A standard Small Business SERVER 2003 Server upgrade SBS Server 2003 R2 STandard requires the new CLIENT access licenses?

Similar Questions

• Small Business Server 2011 hangs on 'Apply the settings of the computer' at startup

  Small Business Server 2011 hangs on "Applying computer settings" on startup and can only start in safe mode

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/SBS/gg985359

  Hope this information helps.

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• T200v server with Windows Small Business SERVER 2003

  Just ordered a server TS200v, can I install Windows Small Business SERVER 2003 on this server, or do I have to upgrade to Windows SBS 2008?

  Hello

  SBS2003 is not officially supported, I think that 2008 alone is. You can try but might be a problem with some drivers.

  J.

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• Windows Small Business Server 2011 Standard access to download

  Hello

  I need to access a copy of the Small Business Server 2011 Standard edition since the MSDN site, in order to help one of my clients.

  They have SBS 2011 standard installed on their network and I'm going to make some big changes to their network. To do this I need to access the installation (file ISO DVD) on MSDN disc. They have the product key, but not the original disks that were used to install SBS 2011 Std.

  Thank you for your help.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• Small Business Server 2011 Standard

  Could not change domain.local to domain.co.nz on Small Business Server 2011 Standard

  Hello

  Your Windows question would be better suited in the Technet forum.  I suggest that you post your question in the Small Business Server forum.

  Small Business Server
  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Thank you

• reinstalled Windows Small Business Server 2003 and Intranet failed during installation

  I had to reinstall Small Business Server 2003 and I can't after setting up where Exchange, etc. are installed. It passes through Exchange perfectly and blocks on the Intranet tools on Disc 3. I use the "fixed" CD because the 3 original drive was corrupted when we bought SBS2003. Our version is the original pre-service pack 1. Is there anyway to download a disk image 3 where my disk is damaged? It seems good, no scratches, scratches or dirt.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Using a Macbook Pro with Microsoft Small Business Server 2011 Standard edition

  Hi, just a quick question about the new Microsoft Small Business Server 2011 Standard Edition.

  My company is currently doing this new server installed and I have a new Apple Macbook Pro.
  Could help me is it someone please let me know if I will be able to use the Macbook Pro in conjunction with the server, that is, I'll be able to use remote access to Microsoft exchange with my Mac?
  Thank you very much

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the forums of Small Business Server. Please post your question in the Small Business Server forum.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Unable to join 7 Pro to the Small Business SERVER 2003 domain

  So far, I was unable to join a new Pro 7 laptop running an existing Small Business SERVER 2003 domain. Whenever I try to use:

  http://servername/ConnectComputer  I get a 403 http error and that it points to an IIS issue, but I can't seem to find a way to work around this problem.

  Then I tried to go through the system properties and computer name change and join. Then, I get a message "cannot locate the area." I tried to use the FQDM, only the name of the server, the domain name under the extension, and nothing works. At first, I thought it was a DNS problem, but, I ping the name of the server or any other computer by name, with no problems...

  Don't know what I'm missing here, but if anyone can shed some light on the situation, it would be greatly appreciated.

  Thank you

  Mark,

  If you'd want to repost your question on the Forums Technet MS, one of SBS experts it would be better suited to provide you with a solution. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pix 501 for Small Business SERVER 2003 configuration problems

  I am new to cisco equipment. My company recently purchased a firewall of Pix 501 unlimited number of users, it is connected to an internet connection by cable with a dynamic ip address. Internet works fine and so the dhcp server.

  I have a Windows 2003 Small Business Server on our network. I need to configure the firewall to forward ports on the SBS server for remote web workplace.

  Also about a week ago I lost connectivity to the GUI of PDM via my web browser. Telnet and console work perfectly well.

  I enclose my config file.

  Any help will be appreciated. Thank you

  Ed

  FIRT off, you do not have a group-access instruction set for one of your ACL. This means that you have blocked all inbound traffic. You also have your incorrect static instructions. You can start by cleaning your config and enter the correct commands, you should be able to stick to your firewall config mode:

  No list will host 192.168.1.1 acl-enabled access 192.168.1.1

  no access list acl_outside not allowed tcp any any eq www

  no access list acl_inside not allowed tcp any any eq www

  no access list no incoming icmp permitted any one

  No list of permitted no inbound tcp access any host 24.50.241.113 eq https

  No list to access acl - permit gre 192.168.1.1 host 192.168.1.1

  No outside_in not allowed access list tcp any host 24.50.241.113 eq www

  not static (inside, outside) tcp interface www SBSServer www netmask 255.255.255.255 0 0

  not static (inside, outside) tcp interface https SBSServer https netmask 255.255.255.255 0 0

  not static tcp (exterior, Interior) interface www SBSServer www netmask 255.255.255.255 0 0

  not static tcp (exterior, Interior) interface https SBSServer https netmask 255.255.255.255 0 0

  static (inside, outside) tcp 24.50.241.113 80 192.168.1.69 80 netmask 255.255.255.255 0 0

  static (inside, outside) 24.50.241.113 tcp 443 192.168.1.69 443 netmask 255.255.255.255 0 0

  access-list OUT-IN permit tcp any host 24.50.241.113 eq https

  access-list OUT-IN permit tcp any host 24.50.241.113 eq www

  allow to Access-list OUT-IN a whole icmp

  Access-group OUT-IN in interface outside

  What ip you are trying to access your pdm of? the looks of configuration http correct, unless your coming to one other than 192.168.1.x ip address

  Let me know if it works

• Behavior of the account profile to prompt when using Windows 7 to connect to a Small Business SERVER 2003 domain

  I just got a complaint from someone saying that the guest account takes more time and more time to log the area.

  We have a number of XP machines and a couple of Windows 7 machines at the reception (to give the impression that we are a company thinging before - you know the kind).  In any case, everything is controlled by a Small Business SERVER 2003 for the integration of Windows 7 machines is that a bit of a botch as well as group policy is concerned.

  The fact is that in my diagnosis, I noticed that the guest account is only given a temporary profile whenever someone connects to use it (it is used for the interviewed work if they need Internet access for some reason any).  Thus, the profile is deleted from the registry and comments folder is removed from C; \Users as soon as they log off.  This was brought to the head when I tried to add a printer to the guest account and could not see all of the printers listed in the AD.

  Is this a normal behavior, or does all the weird sounds you?  It also works with XP in this way?

  Thanks for any input and comments.

  Angus

  Hi siham,.

  Welcome to the Microsoft community.

  I suggest you to report the issue to the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

   

  Thank you.

• Dell PE 1950 and loading of Small Business SERVER 2003

  Recently bought a Dell PowerEdge 1950 off Ebay for a training machine. Also bought a few books of MCBS Server 2003 and Small Business Server 2003. I try to install SBS on 1950, but it does not recognize the RAID. I have a USB floppy drive I could load with F6 drivers but can't seem to find just the Perc 5 / I drivers. Site Web of Dell gives only a Setup driver that wants to install the drivers on my laptop when I use it. Could get only the drivers for a PERC 5 / I integrated. My Service tag # maintain the label removed by privacy policy > I tried a server assistant open gale who would have worked very well, but it doesn't have the SBS2003, only Server 2003 list that does not work either. Thanks for your help

  You need the "hard drive" (ZPE) version of the driver, and you have to run the EXE file to extract the files before using it:

  http://downloads.Dell.com/FOLDER97889M/10/DELL_MULTI-DEVICE_A07_R211422.exe

  In addition, you MUST configure the RAID in the CTRL-R utility until all discs can be seen by the operating system, even with the correct drivers.

  You realize that Server 2003 will be end of life in less than a year, right?  Why the push for 2003 training?  You would be better off learning from 2012.

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Services Terminal Server under Small Business Server 2008

  I have small Business Server 2008 Standard and you bought 5 client access licenses. I'm unable to use the client access licenses - will they work with Small Business Server 2008 Standard? I'm not an expert in this area

  Hello

  Your linked windows question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Remote Desktop Services TechNet Forum:

  (Services Terminal Server) remote desktop services:
  http://social.technet.Microsoft.com/forums/en/winserverTS/threads/

  Hope the information is useful.