Sorensen XG 60-14 error

Hello

I have a problem with a programmable power recently bought Sorensen XG 60-14. In my application (LabView 2012), I use this power to fuel a cooler through regulation PID Peltier. My code sets the current performance of the PSU to the all the 1 sec. My application works without any problem for days, until like 4-5 days, and then I get a crash.

The first problem is that, when I get the error, the LabView gives a pop up window asking continue so or stop? This is really not good, since my code should stop completely in case of error (I wrote my code in a way if there is error, he must close and stop all other material, like other power supplies). I used the official "lvlib" Sorensen to make my own screws, see set in the zip file.

In my code, I first tried to use the "configure Output.vi" Sorensen VI official with very little modification, but usually, I got errors and accidents after 2 or 3 days. So I decided to get rid of dish-sequence-structure and also unnecessary allow exit on every play, so I set it too.

Now I use the Output_Sorensen_XG.vi 'configure', and I call it the "Sorensen_XG_psu.vi." So in my high level VI, I call these screws with 1 Hz frequency.

First, I here insert the photo of the first error that I consider a pop-up error:

After clicking 'continue', I get the following error, but I guess that the first error above is one, as the following is generated due to closed resources?

What can be the problem? I created leak memory somehow? I should close some refnums in the Output_Sorensen_XG.vi 'configure' after each iteration, there is a lot of property nodes?

I hope someone can help me... thanks a lot!

EDIT: actually, I realized that the second jpg is the info error relevant, since the first is just a mistake of a Subvi, where I try to shut down the power supply in case of error, and that the part is not connected via wire error.

So the relevant error is second, the "refnum zero or removed ' a. But how the refnum evaluates to null?

Martins wrote:

In fact I see only two references: 'Out' and 'system '. The reference called "AmetekXGLib.IAmetekXG" is available as an entrance tunnel and is also in the exit tunnel that you see. When I call the "Sorensen_XG_psu.vi" in init mode, I get this ref, and eventually I simply store in a shiftregister as you can see...

(1) IAmetekXGOutputs

IAmetekXGOutputChannel 2).

IAmetekXGSystem 3).

4.) IAmetekXG - which you reuse via the shift register

No closed references cause Excel to continue running in the background that's why I notice them.

Tags: NI Software

Similar Questions

  • Sorensen visa close error

    Hallo!

    Lately, I've updated my LabView 8.6 to 8.6.1 then lately, I get the following error message when you use the VI atteched:

    Error-1073807338 at VISA near sornsg Close.vi-> output - Dima old.vi-> lambda_sornsg.vi-> COG.vi-> Ch2_main_with_s11.vi

    Possible reasons:

    VISA: VISA (Hex 0xBFFF0016) driver failed to properly close the reference object or session. This could be due to a mistake releasing internal or operating system resources, a network connection has failed, or a lower level driver or OS.

    I have no idea of what the problem
    Please advice
    Shai

    problem solved

    the used progrem a visa near the GPIB which, by definition, is always open...

    Thanks anyway

  • Error 1074135030 and hyper-Terminal failure while communicating with the power supply

    Hello

    I use the serial port to communicate with power XG XG 8-100 (series) by Xantrex (Sorensen).

    I could not find the driver in IDNE, but I found one on the site of the company that is http://www.programmablepower.com/products/XTR/XTR_Downloads.htm , when I run the example that I get the below error:

    Error 1074135030 has occurred to be initialized with Options.vi of DC850W

    Driver status: (Hex 0xBFFA000A) check that the name of the library (C:\DC850W\DC850W_32.dll) and (DC850W) prefix are correct.

    I don't know what the problem is with the name of the library that makes such a problem.

    FYI, I tried to communicate with the device using the hyper terminal, but there is no answer. When I check the MAX, it seems that everything is OK, that the State is: the device works properly!

    Do you have any suggestions for me?

    Any help or suggestions appreciated because I'm messed up with this and I don't know how to go further.

    ELA


  • Need help to test the VISA interactive Control: Sorensen XBT32 - 3FTP USB connection problem

    Hello

    I use Windows 7. I installed the USB driver provided in this link:http://www.sorensen.com/products/XBT/XBT_Downloads.htm.

    Max is on the ASRL5: COM5 series & parallel in the Device Manager it is listed in the port: COM5

    I don't know how to test using VISA interactive control to ensure that the connection is established.

    Here are the parameters:

    Serial settings:

    Baud rate: 38400,

    Data bits: 8

    Stop bits: 1

    Parity: None

    I use the default settings for the other options such as flow control: none, Timeout = 2000ms etc.

    In the attributes view tab:

    Attribute: is the connected port

    Current value: error VISA: (Hex 0xBFFF001D) the specified attribute is not defined or supported by the referenced resource.

    I don't know if it's important.

    When I write * IDN? \n (bytes to read: 6), I return the Count: 6 bytes

    When I click on "Read Status Byte":, I get the following error:

    Error reading STB operation VISA: (Hex 0xBFFF003A) cannot start the operation because the installer is not valid (because of attributes defined in an inconsistent state).

    If I click on "Query", I get the following error: reading operation error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

    I also tried to create USB raw driver help driver of VISA Assistant. In this case I kept getting timeout errors: read operation error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

    Can you please tell me what I'm doing wrong?

    Thank you.

    Who cares about the number of bytes written? And configure the windows com port is not relevant. What is important is how you set the com port in the VI or max.

  • Uninstall software update Apple says error in seller contact package package unstaller

    Try to get itunes working to make a backup of my faulty iphone before repair.

    First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

    Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

    Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

    Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • SUMIF error

    I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

    In cell F1

    = E1/if(E1>0, 20, 1)

    fill down as needed

  • An error in this Applescript that I can't understand

    Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

    runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

    Thanks for any help with this problem,

    Mike.



    property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

    property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

    the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

    the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

    game runScript to 1

                   tell application "System events".

    the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

    the value allVolumes to name of every element of disc of rootVolumes

    the value numofallVolumes to the County of allVolumes

    Repeat with the present book in allVolumes

    say application 'Finder '.

    if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

    if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

    runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

    runScript If = 2 then

                                                                            try

    duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

    on error number errorNumber errorMessage

    _error value of errorMessage

    _errorNum the value to errorNumber

    If errorNumber is -15267 then

    display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

    If the returned button of result is 'No' then

    Error number-128

    on the other

    If the result is 'OK' or back button gave up lead and then of

    eject the present book

    display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

    return

    end if

    end if

    end if

    end try

    Try

    duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

    on error number errorNumber errorMessage

    _error value of errorMessage

    _errorNum the value to errorNumber

    If errorNumber is -15267 then

    display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

    If the returned button of result is 'No' then

    Error number-128

    on the other

    If the result is 'OK' or back button gave up lead and then of

    eject the present book

    display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

    return

    end if

    end if

    end if

    end try

    display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

    If the returned button of result is 'No' then

    Error number-128

    on the other

    If the button returned of result is "OK" or gave up a result then ejection of the this book

    display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

    end if

    end if

    end if

    end say

    end Repeat

              end say

    The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

    If the present book is in the ignoredVolumes then

    game runScript to 1

    on the other

    if (the present book as text is not '. ') DS_Store') then

    if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

    end if

    end if


    Of course, you need to remove a "end if' the end of the script.



  • error message when try to sync the iPhone, "invalid response from the device?

    What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

    -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

  • Display Rotation error

    Hello

    I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

    I wanted to know if there is a lasting solution to this problem.

    I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

    Hello PavanGJ,

    Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

    Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

    OS X El Capitan: If you have problems with startup items

    You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

    You can also test the issue in a new user account.

    How to test a question in another account on your Mac - Apple Support

    Let us know if that helps.

    Take care!

  • A fact error 4014 showing each time after all the steps

    One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

    I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

    Thank you for your help and appreciate it.

    I found the solution. Just type here for others with the same problem to solve their problems.

    While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

    Thank you for your support and more.

  • Playgrounds are learning to code 1 download error

    I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

    Finally, the playing field is downloaded successfully!

  • Error Java Run After downloading the new Sierra

    Java is up to date and I get this error message. A couple of times, I have "updated" restarted. Still happens.

    Hi cjshrad,

    Thank you for contributing to the communities of Apple Support. I see in your message you receive a Java error after upgrade to Sierra on your Mac. I'd be happy to help with this!

    First of all, try to install the Java for OS X package found here:

    Download Java for OS X 2015-001

    The next step, if you still see this error, I recommend that you completely uninstall Java from your Mac by following the steps listed here:

    How to uninstall Java on my Mac?

    Once you're done, use this link to download and install the latest version of Java for your Mac:
    Download Java for your Mac - Apple Support

    Take care!

  • "error recovery main area".

    Hello

    I can not access my old video files of my 6 16 GB iPhone, I'm using iOS 10.  When I try to open the videos that I always meet the message 'area main-fetching error' I can't specify when this problem started, but I'm sure it was good when I was with iOS 9.3.3 However, recently filmed videos works perfectly.

    Same thing here. I bought the new iphone and took the backup from your old phone, but the videos do not work.

  • App Store connection error

    Am having a problem of signing in the App Store and iCloud on Preferences system on my MacBook Pro, getting an error response whenever I tried signing in.

    Here are the errors:

    1. Are you sure that you typed your password correctly 100%? (sry, but that would be classic
    2. have you tried to reset your password?
  • Error CoreTelephony

    On my iMac (late 2015) El Captain 10.11.6 this morning I started getting this error on the log in "a tracking file for CoreTelephony operation failed, perhaps you miss disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

    Can someone tell me how to fix it? Some of my apps are now crashing.

    M

    I have also this problem too and the same day

Maybe you are looking for

  • A few questions about the recovery image installation

    A recovery USB drive created using the Recovery Media Creator contains the Windows operating system and is it the Windows key to reinstall - how it is activated. Is it different for the repair disk. Can be used for a new installation of Windows 7 on

  • Enter the power on password

    I need help for my power on password on my HP pavilion Lalonde; After three has no passwords I got a stop code of 07611; Please help me get my power on password.

  • VI by using too much memory

    Hi all I am trying to write a code for pic Pic 2 dimensional on a large enough data file (about 1000 x 72000 points). The results of this should be integer values where each peak has been reduced to its maximum point for later statistical analysis (s

  • Buy a lens

    I bought a 70 d (formerly had a t3i) and now I would like to get a better lens than the kit lens.  I photograph families, beach scenes.  I'm lost - there are so many choices... someone would offer a suggestion for a beginner to intermediate user.  Th

  • 8.1 Windows and XP - internet access

    I have 3 computers on network MSHOME. 2. use XP. I just added a computer 8.1. When I access internet on my XP computer it comes up with the message: Web page you requested is currently offline. To view, click on connect. Sometimes, he also asked if I