Sorry I got the answer

Similar Questions

• I want to uninstall Bethesda game "Seadogs" uninstall box saying 'Are you sure () to unintall' Guard come little matter how many times I click Yes. Anyone got the answer on Vista.

  I want to uninstall Bethesda game "Seadogs" uninstall box saying "Are you sure () to uninstall" warning come shortly matter how many times I click Yes...  Anyone got the answer on the Vista system.  I want to get it out of my computor.

  Hi johndelury,

  I see that Seadogs game is not compatible with Windows Vista, which could be the cause of this problem. See the link below

  http://support.bethsoft.com/eng/platformlist.asp?SID=014429110505065049014055&PID=1077&PNM=sea+dogs

  Method 1: uninstall files could be corrupted, re - install (it replaces the corrupted uninstall files) the game, and then try to uninstall.

  Method 2:  First, contact the manufacturer game for any program to uninstall to uninstall the game completely from the computer.

  Method 3: You can follow the steps mentioned in the article below to manually remove the game

  How to manually remove programs from the add tool / remove programs
  http://support.Microsoft.com/kb/314481

  (Article applies to Windows XP, similar steps valid for Windows Vista)

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• never mind, got the answer!

  Hello

  I'm looking for the command specify ipsec security association lifetime.

  I see the order allowing adjustment of the life expectancy of the isakmp session, but not for the life of ipsec. The command that I found online is not good in my version of IOS...

  What version of IOS that you run on the router.

  You can use

  "crypto ipsec security association life seconds xxxx" in the configuration of this life here will apply to all the cards encryption configured on the router.

  To change life IPSEC for a specific router, you must configure the lifetime IPSEC under this specific encryption card. For example:

  10 TEST ipsec-isakmp crypto map

  defined peer 10.1.1.1

  security-association life together seconds xx

  match address 100

  Kind regards

  Arul

• Just got the new computer but did get no o/s. How to install win 7. ??

  Cannot start Windows 7 grid on the new Lenovo ideacenter computer Q180. Screen says something about freedos and freecom. I just got the C:\ >. Have you tried pressing f8 and f5 are mentioned, but? HELP please. The computer has not not any software windows at all I know. She finished «Press f8 for trace, or f5 mode to work around \autoexec.bat...»

  Complete gibberish to me!

  Anyone got the answers?

  Thank you, Tony

  You say that this computer is new, so it will be under warranty.  If it has never been able to start, I take it back to the place I bought it and tell them that they sold you a defective computer.  They must either fix it or replace it free of charge.  Alternatively, you can contact Lenovo to see if they can help.  New computers should not have these problems.  There's probably a way to restore it to factory settings, but methods differ from one to the other, so you can probably find that on the web site of Lenovo.

  I hope this helps.  Good luck.

• Check if the layer is visible and run a function according to the answer

  Hey guys,.

  I have a question that has been racking my brain these days.

  If I want to run a script when I press a button that will check if a specific layer is visible. If so, it performs another function that shows additional layers. If the specific layer is not visible, it checks the next layer to see if it is visible. This continues until it checks all the necessary layers and is a visible layer.

  Here's the script in question:

  #target photoshop

  //

  clthTopTt.jsx

  //

  cTID = function (s) {return app.charIDToTypeID (s) ;};}

  sTID = function (s) {return app.stringIDToTypeID (s) ;};}

  //

  //==================== actnStd ==============

  //

  function checkactnStd() {}

  Select

  function step 1 (enabled, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "actnStd");

  DESC1.putReference (cTID ('null'), ref1);

  DESC1.putBoolean (cTID ('MkVs'), false);

  var list1 = new ActionList();

  List1.putInteger (17011);

  DESC1.putList (list1, cTID ('LyrI'));

  executeAction (desc1 cTID ('slct'), dialogMode);

  };

  If

  step2 function (activated, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  DESC1.putEnumerated (cTID ('null'), ('Cndt') cTID, cTID ('Ahsvs'));

  var ref1 = new ActionReference();

  Ref1.putName (cTID ('Actn'), 'select actnStd');     <-if the actnStd layer is visible, rather than performing this action, it runs the function selectactnStd().

  Ref1.putName (cTID ('ASet'), 'clthTopTt');

  DESC1.putReference (cTID ('then'), ref1);

  ref2 var = new ActionReference();

  ref2.putName (cTID ('Actn'), "check actnWlk");  <-if the actnStd layer is NOT visible, it executes the next layer checks (via the function checkactnWlk(). )

  ref2.putName (cTID ('ASet'), 'clthTopTt');

  DESC1.putReference (cTID ('else'), ref2);

  executeAction (desc1 sTID ('conditional'), dialogMode);

  };

  Step1();      Select

  Step2();      If

  };

  function selectactnStd() {}

  Show

  function step 1 (enabled, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var list1 = new ActionList();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "topStdTt");

  Ref1.putName (cTID ("'Lyr"), "topMskStd");

  List1.putReference (Ref1);

  DESC1.putList (list1, cTID ('null'));

  executeAction (cTID ("'Shw"), desc1, dialogMode);

  };

  Hide

  step2 function (activated, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var list1 = new ActionList();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "topWlkTt");

  Ref1.putName (cTID ("'Lyr"), "topMskWlk");

  Ref1.putName (cTID ("'Lyr"), "topRunTt");

  Ref1.putName (cTID ("'Lyr"), "topMskRun");

  List1.putReference (Ref1);

  DESC1.putList (list1, cTID ('null'));

  executeAction (desc1 cTID ("Hd"), dialogMode);

  };

  Step1();      Show

  Step2();      Hide

  };

  //

  //==================== actnWlk ==============

  //

  function checkactnWlk() {}

  Select

  function step 1 (enabled, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "actnWlk");

  DESC1.putReference (cTID ('null'), ref1);

  DESC1.putBoolean (cTID ('MkVs'), false);

  var list1 = new ActionList();

  List1.putInteger (17012);

  DESC1.putList (list1, cTID ('LyrI'));

  executeAction (desc1 cTID ('slct'), dialogMode);

  };

  If

  step2 function (activated, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  DESC1.putEnumerated (cTID ('null'), ('Cndt') cTID, cTID ('Ahsvs'));

  var ref1 = new ActionReference();

  Ref1.putName (cTID ('Actn'), 'select actnWlk');

  Ref1.putName (cTID ('ASet'), 'clthTopTt');

  DESC1.putReference (cTID ('then'), ref1);

  ref2 var = new ActionReference();

  ref2.putName (cTID ('Actn'), "check actnRun");

  ref2.putName (cTID ('ASet'), 'clthTopTt');

  DESC1.putReference (cTID ('else'), ref2);

  executeAction (desc1 sTID ('conditional'), dialogMode);

  };

  Step1();      Select

  Step2();      If

  };

  function selectactnWlk() {}

  Show

  function step 1 (enabled, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var list1 = new ActionList();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "topWlkTt");

  Ref1.putName (cTID ("'Lyr"), "topMskWlk");

  List1.putReference (Ref1);

  DESC1.putList (list1, cTID ('null'));

  executeAction (cTID ("'Shw"), desc1, dialogMode);

  };

  Hide

  step2 function (activated, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var list1 = new ActionList();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "topStdTt");

  Ref1.putName (cTID ("'Lyr"), "topMskStd");

  Ref1.putName (cTID ("'Lyr"), "topRunTt");

  Ref1.putName (cTID ("'Lyr"), "topMskRun");

  List1.putReference (Ref1);

  DESC1.putList (list1, cTID ('null'));

  executeAction (desc1 cTID ("Hd"), dialogMode);

  };

  Step1();      Show

  Step2();      Hide

  };

  //

  //==================== actnRun ==============

  //

  function checkactnRun() {}

  Select

  function step 1 (enabled, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "actnRun");

  DESC1.putReference (cTID ('null'), ref1);

  DESC1.putBoolean (cTID ('MkVs'), false);

  var list1 = new ActionList();

  List1.putInteger (17013);

  DESC1.putList (list1, cTID ('LyrI'));

  executeAction (desc1 cTID ('slct'), dialogMode);

  };

  If

  step2 function (activated, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  DESC1.putEnumerated (cTID ('null'), ('Cndt') cTID, cTID ('Ahsvs'));

  var ref1 = new ActionReference();

  Ref1.putName (cTID ('Actn'), 'select actnRun');

  Ref1.putName (cTID ('ASet'), 'clthTopTt');

  DESC1.putReference (cTID ('then'), ref1);

  ref2 var = new ActionReference();

  ref2.putName (cTID ('Actn'), "check actnAc");

  ref2.putName (cTID ('ASet'), 'clthTopTt');

  DESC1.putReference (cTID ('else'), ref2);

  executeAction (desc1 sTID ('conditional'), dialogMode);

  };

  Step1();      Select

  Step2();      If

  };

  function selectactnRun() {}

  Show

  function step 1 (enabled, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var list1 = new ActionList();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "topRunTt");

  Ref1.putName (cTID ("'Lyr"), "topMskRun");

  List1.putReference (Ref1);

  DESC1.putList (list1, cTID ('null'));

  executeAction (cTID ("'Shw"), desc1, dialogMode);

  };

  Hide

  step2 function (activated, withDialog) {}

  If (enabled! = undefined & &! activated)

  return;

  var dialogMode = (withDialog? DialogModes.ALL: DialogModes.NO);

  var desc1 = new ActionDescriptor();

  var list1 = new ActionList();

  var ref1 = new ActionReference();

  Ref1.putName (cTID ("'Lyr"), "topStdTt");

  Ref1.putName (cTID ("'Lyr"), "topMskStd");

  Ref1.putName (cTID ("'Lyr"), "topWlkTt");

  Ref1.putName (cTID ("'Lyr"), "topMskWlk");

  List1.putReference (Ref1);

  DESC1.putList (list1, cTID ('null'));

  executeAction (desc1 cTID ("Hd"), dialogMode);

  };

  Step1();      Show

  Step2();      Hide

  };

  After he checks the last layer, then end the script.

  'clthTopTtLoop.jsx '.

  EXPRESSIONS OF FOLKLORE

  Any help is appreciated seriously. Thank you guys!

  Hey guys, I promised that I would update this post to help others if I got the answer, so here:

  Firstly, the developer has created a function to automatically get the layer. I had problems to find ways to select layers, especially because the layers were nested in groups inside groups. This helped solve that. The function was this:

  function selectLayer(name) {
    var desc = new ActionDescriptor();
    var ref = new ActionReference();
    ref.putName( charIDToTypeID('Lyr '), name );
    desc.putReference( charIDToTypeID('null'), ref );
    desc.putBoolean( charIDToTypeID('MkVs'), false );
    executeAction( charIDToTypeID('slct'), desc, DialogModes.NO );
    return
  };
  

  Then call the layer using layer real name (assuming that your layer names are unique. If they aren't, you'll find yourself only to select the first layer with the same specific name) throughout your script file.

  IE. In my case, selectLayer ("actnStd"); or selectLayer ("actnWlk");

  You then set the visibility by using the following code:

  // show
  app.activeDocument.activeLayer.visible = true;
  // hide
  app.activeDocument.activeLayer.visible = false;
  

  Then use a function to check whether a layer is visible. If the layer is visible, you run the function show/hide layers respective:

  function CheckactnWlk() {
    selectLayer("actnWlk");
    if  (app.activeDocument.activeLayer.visible == true) {
    SelectactnWlk()
    }
    else  {
    CheckactnRun();
    }
  };
  

  So in the end, the final script looks like this:

  #target photoshop
  
  app.bringToFront();
  CheckactnStd();
  
  function CheckactnStd() {
    selectLayer("actnStd");
    if  (app.activeDocument.activeLayer.visible == true) {
    SelectactnStd()
    }
    else  {
    CheckactnWlk();
    }
  };
  
  function SelectactnStd() {
    selectLayer("topMskStd");
    app.activeDocument.activeLayer.visible = true;
  
    selectLayer("topStdTt");
    app.activeDocument.activeLayer.visible = true;
  
    selectLayer("topWlkTt");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topMskWlk");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topRunTt");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topMskRun");
    app.activeDocument.activeLayer.visible = false;
  }; 
  
  function CheckactnWlk() {
    selectLayer("actnWlk");
    if  (app.activeDocument.activeLayer.visible == true) {
    SelectactnWlk()
    }
    else  {
    CheckactnRun();
    }
  };   
  
  function SelectactnWlk() {
    selectLayer("topMskStd");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topStdTt");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topWlkTt");
    app.activeDocument.activeLayer.visible = true;
  
    selectLayer("topMskWlk");
    app.activeDocument.activeLayer.visible = true;
  
    selectLayer("topRunTt");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topMskRun");
    app.activeDocument.activeLayer.visible = false;
  
  };
  
  function CheckactnRun() {
    selectLayer("actnRun");
    if  (app.activeDocument.activeLayer.visible == true) {
    SelectactnRun()
    }
    else  {
    alert ('There is no Selected Layer', 'Please select a layer', 0);
    }
  };
  
  function SelectactnRun() {
    selectLayer("topMskStd");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topStdTt");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topWlkTt");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topMskWlk");
    app.activeDocument.activeLayer.visible = false;
  
    selectLayer("topRunTt");
    app.activeDocument.activeLayer.visible = true;
  
    selectLayer("topMskRun");
    app.activeDocument.activeLayer.visible = true;
  
  };
  
  function selectLayer(name) {
          var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putName( charIDToTypeID('Lyr '), name );
         desc.putReference( charIDToTypeID('null'), ref );
         desc.putBoolean( charIDToTypeID('MkVs'), false );
         executeAction( charIDToTypeID('slct'), desc, DialogModes.NO );
         return
  };
  
  app.preferences.rulerUnits = rUnit;
  app.preferences.typeUnits = tUnit;
  
  selectLayer("actnStd");
  

  Guys good luck! Now to find how to select random layers via the script.

• I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.

  Original title: Win32/Small.CA

  I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.  I ran the security scan and the answer was "no viruses or malware found."  Could someone tell me how to deal with a Win32/Small.CA and how to determine if I really get it.  Thank you.

  Hello
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• Hello, December 22, 2015, I paid € 144,33 on account of Adobesystem (using photoshop). I wonder what for? I got no answer, no program to install etc... Can you help me? I used the demo version with the idea that I could be updated, but

  Hello, December 22, 2015, I paid € 144,33 on account of Adobesystem (using photoshop). I wonder what for? I got no answer, no program to install etc... Can you help me? I used the demo version with the idea that I could update, but nothing.

  Download/install the desktop application, connect and install applications subscription.
  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

  Install creative Cloud applications
  http://TV.Adobe.com/watch/CS6-creative-cloud-feature-tour-for-video/installing-desktop-app s-of-creative-cloud.

• I bought Photoshop element 14, but got the version of Windows, not Mac I wanted. Is it possible to change? I have not yet downloaded. And is it possible to contact Adobe to have an answer?

  I bought Photoshop element 14, but got the version of Windows, not Mac I wanted. Is it possible to change? I have not yet downloaded. And is it possible to contact Adobe to have an answer?

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• I got an answer to a question, but it does not work

  II have a folder with the number of messages 'unread' continues to go up to about 450 to 489 at the present time. When I click on the quick filter or just scan the folder, I generally find on the number of new messages, I expect. But once I have deleted all, the case is still in the poster about 489 unread messages. The answer I had was to click with the right button on the name of the folder, then click on folder to mark as unread. I did it and nothing happens, although it does not work with other folders Inbox. I'm willing to try anything.
  Thank you

  arrick said

  II have a folder with the number of messages 'unread' continues to go up to about 450 to 489 at the present time. When I click on the quick filter or just scan the folder, I generally find on the number of new messages, I expect. But once I have deleted all, the case is still in the poster about 489 unread messages. The answer I had was to click with the right button on the name of the folder, then click on folder to mark as unread. I did it and nothing happens, although it does not work with other folders Inbox. I'm willing to try anything.
  Thank you

  When I thought about it, I realized that there were some subfolders that have unread messages. When I deleted them, I got the number zero. Sorry for my stupidity.

• I asked a question on how to disable HP Simplepass, and I got no answer. Anyone know anything about this?

  I asked a question on how to disable HP Simplepass, and I got no answer.  Anyone know anything about this?

  Hi, sorry for the wait...

  What version of Windows are you using?

  Try this:

  1 run.
  2. type netplwiz
  3. users tab

  4 uncheck users must enter a user name and password to use this computer

  5. click on apply, Ok

• I forgot my password and not sure of the answer to my secret question so impossible to singin' or reset the password

  Hey there, I got my password of windows live account * address email is removed from the privacy *, I'm also not sure of the answer of the secret question... but my what is important, I still have access to my email in this account, and I think it would be useful to reset my password accouns, HELP

  Please carefully follow all of the steps on the Recovery Windows LiveID account Help Page.

  Sorry, we can not help you with your Hotmail account number in the Microsoft answers Forums.

  Kind regards.

• I forgot the answers to security questions

  I forgot the answers to security questions, and does not appear when I click change issues, the link "reset your security questions. I got an email from relief. so, how can I change the questions?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (143453)

• My iPhone 6 s + has been stolen. I got the code to access and iCloud, and I putted in find my iPhone. Here illegally, could unlock iPhone and log in icloud.

  My iPhone 6 s + has been stolen. I got the code to access and iCloud, and I putted in find my iPhone. Here illegally, could unlock iPhone and log in icloud. I only had reference no.. MKV82LL/A, Series n F2 * RWV on the packaging. I wonder how do I get it back?

  < personal information under the direction of the host >

  Hello Miss116,

  I am so sorry your iPhone was stolen, it's a terrible feeling, and I'm here to help you with everything I can.

  1. go to a computer and go to iCloud.com and sign in with your Apple ID and password.

  2. go find iPhone and all devices at the top, click on your iPhone.

  3. click on lost Mode and put in a phone number where you can be reached.

  4. click Next, then enter a message that says something along the lines, "Please find my iPhone, please call this number to return."

  5. click on done

  Best wishes to get your iPhone back safely.

• tried to start an application, "requires at least version 8 of Flash. Please update your client. Yes, I did. restarted FireFox, but I got the same msg.

  I tried to start an application, got "requires at least version 8 of Flash. Please update your client. I've done (..) Adobe Flash Player 11.0.1.152). restarted FireFox, but I got the same msg. Then I restarted Windows 7... no change.

  There are 2 versions of Adobe Flash:

  • an ActiveX version for IE only
  • a plug-in version for most of the other browsers including Firefox
  • On a Windows system, you must always update both individually.

  You don't seem to have the Plugin for Firefox installed version. If you did, in the Add-ons > Plugins you would see "Shockwave Flash (version)".

  Install or update Adobe Flash

  1. With Firefox, click the direct download link below and SAVE the download on your desktop, so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
  2. When the download is complete, close Firefox (file > button OR exit Firefox > exit)
  3. Click or double-click the file that you just saved on your desktop
     • In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
     • The button 'Install' in the lower right corner is now highlighted, click it.
     • Installation is quick.
  4. Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
  5. ActiveX for IE onlydirect link version: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  Kindly help.

  Hi Sophie,.

  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer