Sort by start time of file in multitrack - hearing CC

Similar Questions

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• How to set the start time of QuickTime movie in AppleScript?

  I've been tasked with finding a way to play videos to QuickTime in full screen at a specific time.

  It seems that I have to use AppleScript, which I've never used it before.  I wrote this, that does everything, but from the beginning of time says:

  Tell application "QuickTime Player"

  Open the file "Macintosh Users:...: video56.mp4.

  present the document before

  play

  tell the end

  I found the dictionary AppleScript of QT (1. Open the Script Editor. 2. Choose file > open dictionary. 3. Select the reader QuickTime Player.) and think I want to use the document, currently.

  Where I'm stuck, but I can't understand how to use the document command.  All other orders that I used (open game) end in a 'v' and the document ends with a 'n', which is probably relevant.  How, I have no idea.

  Thanks in advance for any help!

  El Capitan 10.11.3 OSX

  21.5 "iMac late 2009

  QT worm 10.4 (855)

  Hello

  The script must set the current time property of the document, like this

  ------------

  Tell application "QuickTime Player"

  set tDoc to open the file "Macintosh Users:...: video56.mp4.

  tDoc said

  at the time current 36 - the start time of the movie (in seconds).

  present

  play

  tell the end

  tell the end

  -----------

  Shortman43 wrote:

  I found the dictionary AppleScript of QT (1. Open the Script Editor. 2. Choose file > open dictionary. 3. Select the reader QuickTime Player.) and think I want to use the document, currently.

  Where I'm stuck, but I can't understand how to use the document command.  All other orders that I used (open game) end in a 'v' and the document ends with a 'n', which is probably relevant.  How, I have no idea.

  The v designates a file object.

  And the n is a document object.

  Examples:

  read the document 1

  document before playing

  read the document 2

  play tDoc - the tDoc variable contains a document object

  or with a block of tell

  tDoc said

  play

  tell the end

  tell document before

  play

  tell the end

• start time of 4 + hours

  Someone knows how to fix a start time of 4 + hours with the following newspapers?

  System.log:

  20 jan 17:40:38 restart [9115]: SHUTDOWN_TIME: 1453340438 303534

  20 jan 17:45:27 localhost bootlog [0]: BOOT_TIME 1453340727 0

  20 January 22:07:49 localhost syslogd [50]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  accountpolicy.log:

  Jan 20 17:31:14 (86.556.1) AuthenticationAllowed completed: file '', result: success (0).

  20 January 22:13:27 agent political support account from

  There is literally nothing else in newspapers during the same period.

  iMac 27 inch El Capitan 10.11.3 running 16 GB on memory.

  I really do not have to do a complete cleaning and reinstall.  I have already checked the permissions of drive, reinstalled OSX without wiping the drive and so far nothing works. In the past, it was 2-3 hours of starting time, but 4 + hours is too much.

  You USED to have 2-3 HOURS of waiting for Mac to start?

  Of course it looks like a hard drive failing for me.

  What happen when Mac boots and is running?

• by the numbers, how can I convert a start time and end in hours time

  I convert my files to Excel, and no to not translate my formulas.

  I have a start time, end time, and hours, what formula should I use to have hours to calculate?

  Thanks for any help

  by the numbers, you can perform mathematical operations on time like this... assuming they are valid values for date/time...

  Assuming that one time is in cell A1 and the other is in A2, you can get the difference like this:

  = dur2hours(a1-a2)

• Problems with the start time/Display Tune (r) / Vista Business

  Dear community of Mic,
  I have two problems that slow down my computer.

  (1) start time:
  After my computer starts, it loads quickly in the logon section. However, after I give my login information
  the HP computer HP monitor goes black for about two minutes, then the desktop.

  (2) display tune (r): after the desktop appears, I get an error box saying that "Display Tune (r) failed to load.

  I removed Display Tune (r) in the list of programs using the uninmstall tool in Control Panel.
  I even deleted display Tuner (r) additional files I found during a search.

  However, the error of Display Tune (r) appears after every start.  Even tried to reload the program, but to no avail.

  Any help would be appreciated gratefully.

  Thanks in advance.

  B.B.

  [Moved from comments]

  Hello

  Thanks for posting the request in the Microsoft community forum!
  It seems that the laptop computer goes to black screen after login section and the 'Display Tune (r) failed to load. To get these fixed issue, try the suggestions.

  You did changes to the computer before the show?

  Follow the suggestions listed among the links:

  Method 1:
  If you have any external device connected to the computer, you can try to unplug the external devices except the keyboard and mouse and check if the problem occurs.

  Method 2:
  Step 1: Try to start in safe mode and check is that the computer goes to black screen.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.

  Method 3:
  If the problem persists, you can update all divers latest including the BIOS on the manufacturer's Web site and check if it helps.

  
   

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please post if the problem persists, we will be happy to help.

• How to add programs to the start of the file using Vista

  How to add programs to the start of the file using Vista

  Hi Harry,.

  Oddly enough, you can actually do it in msconfig except if it is already there and simply not checked as opposed to not being do not at all (although you would think that they would understand this option).

  The easiest way is to add the program (or a shortcut to the program) in the folder all Menu Programs Startup.   Here is the procedure: http://www.ehow.com/how_5098465_add-startup-programs.html.  Remember, to do this, you must either a shortcut existing (perhaps on the desktop or elsewhere in the menu all programs) or you need to find the source file (probably somewhere in C:\Program Files depending on what you want to add) and either copy it and add it to the startup folder or right-click on it and create a shortcut to copy into the startup folder.  Once you reboot, this program starts during the initial commissioning process and you will now be able to control using msconfig.exe, if you wish.

  Another option is to do this by using the registry editor.  If you decide to try this, first create a restore AND system restoration point backup of the registry before you begin.  Here is the procedure: http://www.ehow.com/how_7304438_add-program-msconfig-regedit.html.  I recommend to use this ONLY if the previous procedure does not work for some reason any as long as that the procedure is simpler and safer.

  If you want a simpler way to manage and control startup programs, you can try it free WinPatrol http://www.winpatrol.com/download.html that change monitors for startup programs if you set it to run in real-time so that you know when to try new programs are added to your Start menu and, for the purposes of this question includes an Add button which opens a link to a window of Windows Explorer where you can browse the program you want to add, click open to select and then add it directly to the commissioning.  If you prefer it does not work all the time, you can simply uncheck the box which includes this program and it will work only when you choose to run (but at the start, will work as an indication otherwise or configured).  It will appear not in the start menu in all programs (Finally, WinPatrol is, but not programs, it adds to the start), but it will appear in WinPatrol (which also lets you manage what you want or not start with checkboxes as in msconfig) and sure in msconfig - but only after a reboot is complete the process of adding.

  I hope this helps.  Personally, I use WinPatrol myself and let it run in real time.  Since I do a lot of installations, it helped me often prevent the addition of a startup item I haven't really need and reduces how many times I actually need to check what is happening out there.

  If this answers your question without the need to repost in another forum, please mark it as an answer.  If this isn't the case, then of course you must republish as suggested above.

  Good luck!

• Sort by capture time does not

  
  I looked at the responses to similar topics, and most of the problems had something to do with video files. Here's my problem, I have recently updated my Lightroom CC. When I imported 3 Lexar 16 GB cf cards pro using a Lexar workflow Tower, all imported correctly. Which means only one card at a time. I used 2 cameras Nikon D700 separate shooting only RAW files. When I hit 'Sort by capture time' nothing has happened. Files begin with 'D7A' and 'D7B"to keep a tab on what camera which takes snapshots. However, LR is now alone, sorting by file name and no time. I double checked to make sure that the time stamps are correct. I'm on Windows 7 has anyone else seen this behavior? Any suggestions? Many thanks - Harry

  I never had this problem '' IF '' the time has been set correctly on both devices. Check the cameras to see if they are turned off in a few minutes or more. Not if they are out of time, but if a camera is set to 12:00 and the other on 12:05 or 01:00.

• Start time of SGD

  Hello

  I wonder if there is a way, either on the server WHO, or repository backend database to know the last time that the WHO has started. When I use the emctl status details who it does not give the timestamp at which the current WHO began. But when you do it for an agent (agent status emctl) you get these information for the start of agent time.

  Status of WHO:

  >. / emctl status who-details

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  Enter the password to Root of Enterprise Manager (SYSMAN):

  Console server host: omsserver.mycompany.com

  Console HTTP port: 7778

  Console HTTPS port: 4444

  Download HTTP port: 4889

  Download HTTPS port: 1159

  Instance of EM homepage: / u01/app/oracle/product/MiddleWare/gc_inst/em/EMGC_OMS1

  Location of the journal WHO directory: / u01/app/oracle/product/MiddleWare/gc_inst/em/EMGC_OMS1/sysman/log

  SGC is not configured with the PES or virtual host name

  Download of the agent is unlocked.

  SGD console is unlocked.

  CA active ID: 1

  Console URL: https://omsserver.mycompany.com:4444 / em

  Download URL: https://omsserver.mycompany.com:1159/empbs/upload

  WLS domain information

  Domain name: GCDomain

  The host server administrator: omsserver.mycompany.com

  State of the agent:

  >. / emctl status agent

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  ---------------------------------------------------------------

  Agent version: 12.1.0.2.0

  Version of the WHO: 12.1.0.2.0

  Protocol version: 12.1.0.1.0

  Home Agent: / u01/app/oracle/product/agent12c/agent_inst

  File binary agent: /u01/app/oracle/product/agent12c/core/12.1.0.2.0

  Agent process ID: 11230

  Parent process ID: 11013

  Agent URL: https://agentserver.mycompany.com:1831/emd/hand /

  Repository URL: https://hlcnwoemp01.mycompany.com:1159/empbs/upload

  Starts at: 2013-08-31 12:45:55 < = Start time

  Started by user: oracle

  Last charging: (none)

  Last download successful: 2013-11-25 15:08:10

  Last attempt to download: 2013-11-25 15:08:10

  Total megabytes of XML files uploaded so far: 552.38

  Number of XML, waiting for loading files: 0

  Size of the XML files in the upload wait (MB): 0

  Available disk space on the file upload system: 47.17%

  Collection status: activated Collections

  Pulse Status: Ok

  Last heartbeat to WHO attempt: 2013-11-25 15:07:46

  Last pulse in SGD: 2013-11-25 15:07:46

  Then, at the request of the heart rate to WHO: 2013-11-25 15:08:46

  ---------------------------------------------------------------

  Agent is running and ready

  Thank you!

  Console > Setup > manage Cloud control > Management Services

  In the table, click the name of the management service

  Service of management of Oracle (drop down menu) > surveillance > status history

  General section obtained information since when WHO is in place

• Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe

  Hello world!

  I don't know how, but I have a problem when my windows Vista from (running)
  The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
  I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.

  And another question...
  There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.

  It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
  Thanks for the replies, nd sorry about my English :-) skills
  Best wishes from the Bulgaria and have a nice day!

  Post edited by: me

  null

  Hello

  I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.

  Kody is good. Reinstall the VAP and check if this helps solve this problem.

  With regard to the question of the other;
  You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
  However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba page

  You must install all the drivers available if you want to use all the features of the laptop.

  Concerning

• Satellite M30: Windows cannot start because a file is missing

  Error message: Windows cannot start because a file is missing.
  \Windows\system32\config\system

  You can repair from ordinary cd and use "r" for repair.

  How to use recovery cd for this... It does not work.

  Hello

  It's not easy to use the repair mode because the recovery image file CD. The other way is that you try to start the operating system is the safe mode and look if the lack of files exist in the C:\I386 folder. If not, well I think that the only way is to recover the system with the recovery CD.

  Good bye

• Incompatibility of RS232 &amp; Personal DAQ Start Time

  I'm looking to collect data from two separate serial ports and a personal data acquisition (analog input) at the same time.  everything seems to work fine until I try to display information on a list.  I get an error indicating that the start times are incompatible.  I'm not sure how to match the time of departure for these three modules.  serial ports seem to start at the same time, but the acquisition of data trolling in about a second or two.  running with Dasylab 11

  The pilot of x 5 PersonalDAQ play well with others.

  Define full Adapt for linear Interpolation and the serial number for "a row of data" (or whatever the second choice is called in your version).

  The first entry of the Adapt is the channel FASTER, that should be the PersonalDAQ, unless you have collection at a very slow sample rate.

• How to synchronize the start time in the waveform graph

  Hi all

  I just find a solution in the forum to select the data you want in a grap of waveform with cursors, however, I don't know how to synchronize the time of beginning of waveform for the second graph. How can I extract start time of the waveform with the index data?

  

  Something like that?  It is a bit gross, but is what I think you're asking, should be able to use it as a starting point.

  

  The Max - Min is to make sure that the cursor is always valid.

• When computer booting XP, getting an error saying that windows could not start because a file is missing - windowsroot7\system32\ntoskrnl.exe

  When I pass my computer on a message informing you that windows didn't start because a file is manquant-windowsroot7\system32\ntoskrnl.exe, can you help me?

  * original title - computer error! *

  Hi shortie083,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  This problem is solved replaced smps problem is resolved. Maybe the smps is not given the correct voltage