Sort by capture time does not

Similar Questions

• Alarm and timer does not iOS 6 s 10

  Help! After having downloaded the iOS 10, my alarms and timer does not work. During the years that I have had 4 different alarms set - 2 in the morning and 2 the afternoon. This morning the alarm at the top of my phone icon was there, so I assumed that everything was settled as it is normally. I was wrong. My 05:30 alarm has not extinguished the next morning. The next day, I could turn it back on, but when I went to all other lights it shuts down another. It would only be standing. So, I opted for the alarm from 05:30 again. With my phone not allowing an alarm to be defined at the time, now I'm going to put it but it randomly turns off its own. I'm FED UP with it! I used my phone as alarm clock years but had to go out and by a real wake-up call to make sure I wake up in the morning. Not only that, but my timer does not work either. What is someone is having these problems?

  I did have the problem where one turn the other goes out, but since I got my iPhone with iOS 10 7 or my alarm not timers turn off. I watched the ticks to zero with no sound, no matter what I do. There is no problem with volume control and I did it with the key "secret" on and outside. I am at a total loss.

• Tap to talk time does not work on my watch

  Hey guys!

  Tap to talk time does not work on my watch.

  I know that his works only with Mickey/minnie.

  the watch is after unpari/pair, the "tap to speek" function is enabled (on the iphone and the watch)

  both are updated to the latest ios/watch OS and still...

  any ideas...?

  Thank you!

  Return on investment

  Hi King

  I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

  My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere 3-5 hours, but you can see that the function starts working sooner than that.

  It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• Face time does not work since this morning if my wifi connection is fine and parameters also very well.

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  Mamimisra wrote:

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  https://support.Apple.com/en-us/HT204168

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• WIndows 7 sleep timer does not

  Recently, I reformatted my HP Pavilion p6580t and installed Windows 7 Ultimate on it. For some reason, the timer does not work. He won't be sleeping the monitor or computer. If I put it to sleep manually it works, but will not be out of the timer. The only thing I've updated was the graphics driver SP59747 and install the network key usb wireless TP Link on the computer. After installation, the timer does not work. It doesn't seem to work before installing these 2 points. Guys do you have an idea what is happening? Any help would be greatly appreciated.

  Thank you, copy and paste in. Looks like I missed some updates (I have them all thinking). Once I downloaded all, it seems to work now.

• Family timer does not work for Windows 8

  I can view the activity report and check the websites visited, but everything doesn't seem to work properly.  The time settings and the curfew does not work and when I view the reports using pc is far from what is used.

  Hello

  I would like to you can check this post about delays on parental control. Refer to the post of Eugene_R.

  Time does not

  Moreover, in a resolution of the initial problem, I suggest that reconfigure you the account user. Here's how:

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Second: In case you want your child free of any restriction which actually an adult account, you will need to just make sure that he or she is not a member of the safety of your family to check on the Family Safety website. To remove a child, go to manage the list of the members of the family. Select the account you want to delete by checking the box on the right, click on remove, then confirm by clicking on remove again.

  In case you have problems after deleting the account as a child, please update the personal data of the account by connecting to https://account.live.com/summarypage.aspx.

  Note: If you are currently logged in using your account, you must open a session and re-enter your child's account.

  Thank you.

• Time does not properly.

  The allocation of time does not work. The curfew works only in increments of 1 hour. The half hour makes no difference. We have 4 laptops with Win7 on them.

  Ouer & Eugene Hi,

  Please make sure that the correct windows user name is labeled as handled in http://fss.live.com/. Also to ensure that the time on the computer is time settings that you have configured in http://fss.live.com/.

  You can also check if Windows Live family safety is defined as control of your child's computer provider. To check, you can follow these steps:
  1. click on the Start button
  2. go to the Control Panel, then select Panel of all elements
  3. choose Parental control
  4. a list of Windows users who are on this system will be shown under additional scrutiny, the drop-down list of choose a provider of worth Windows Live Family Safety.
  5 wait for the system to update, and then try if the time restriction will be applied.

  NOTE: You must log in as an administrator user to perform the above steps.
  
  Another step that we recommend is to uninstall and reinstall Windows Live parental controls on the computer. Please be guided by the following steps to avoid conflicts:
  1. log in to http://fss.live.com , using your main email address.
  2. in virtue your computers, click remove computers from this list.
  3. next to the name of the computer that you want to remove, select Remove, and then click Save.
  4. return to the home page. To remove a member of the family, simply click remove a member of the family.
  5. check the Remove check box. And then click Remove.
  6. uninstall the client Windows Live Family Safety.
  a. in Windows 7, click Start, select Control Panel
  b. under programs, click uninstall a program
  c. Select Windows Live Essentials, and then click Uninstall/Change
  d. click remove one or more Windows Live program
  e. Select Windows Live Messenger in the list, and then click Uninstall of
  7 re-install Windows Live Family Safety from this link
  8 set deadlines, then check if the problem has been resolved.

  I know that these steps are long and will take time to do however these can isolate the cause of the problem. In addition, there is a recent change in the functionality of delays in parental control, please read the thread in the link below:

  Time does not

  Thank you
  Gerard G.

• Time does not automatically refresh in computer hp laptop g62-457dx

  I have a hp laptop g62-457dx. recently, I have faced this problem. his time does not update. When I connect online and time updated, then it works. but when I turn off my computer, laptop and portable lights after one or two hours later's time does not update.

  How can I solve this problem?

  Original title: time problem

  CA

  It's mostl probably the CMOS battery.  This battery keeps track of the time when the computer is turned off.  It is not too difficult to replace and is less than $20

• I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  Hi Yanni,

  Tethered shooting works fine with Lightroom 6.4 on El Capitan.

  You can then go ahead and buy Lightroom and perform the tethered shooting.

  Kind regards

  Tanuj

• Sorting by Capture time?

  New digital photography I take seems to be perfectly managed by LightRoom 2015 CC, there is a time to Capture poster and when I sort a file or a collection of these 'capture time' it works as I expect, but when I take an old photo taken on an old camera or scanned recently or years ago that I'll meet serious problems trying to associate a date for the old photo and then have sort correctly and I have been reading and browsing for hours and have found no clues other than that stores Lightroom several dates and times with a photo I am sometimes (sometimes only) able to see in the EXIF metadata Preset and they understand :

  Date time Original

  Date time digitized

  Date time

  (see: Lightroom files can contain several Dates "Julieanne Kost's Blog of ")

  I don't see an easy way to change these fields, and they tend to "come and go" when you browse the different files with the same "EXIF Preset' selected. However, I can edit and sort by (yay!), called the Capture time, that would be great if it worked. But unfortunately edition the using metadata to capture Date/time / command menu to change the Capture time doesn't seem to change how this picture sorts out when 'Capture time' is selected for the type.

  The only other option triage is called 'Added order', which is perhaps one of the three metadata fields that I list above?

  It seems to me that someone above Adobe worked ENOUGH SACRAMENT HARD to make it so difficult! ::) or I have a damaged catalog or user, me, is missing some basic notion. In any case, I hope that everyone who reads this will forgive my attempts rather feble to hide my frustration in this. There is a lot of work to change the timestamp date 22 thousand pictures, especially when you have already done in Photoshop elements Organizer and little if any that is deferred and appartently needs to be redone. So yes, I'm frustrated, so forgive me and help me understand what is happening, refer me to something I should have read before starting this project, give me homework, I have a Lynda.com account, just please tell me not concerning the bug well documented with metadata in video editing, this is not what it is. Please do not give me great detailed explanations of the three options to adjust the Date/time of Capture on selected images, I've lived all this. I just need to know how to change a date field for a photograph that Lightroom will allow me to sort by and I don't like that it is or if I lose any reference to another date the file is trying to remember (I do not remember when the photo was scanned). And please excuse my tone! I'm really a fan of the product, but he left me speechless on this problem! ::) Thanks for the advice, suggestions and patience! : )

  -Michael

  Huge thanks to johnrellis and Just Shoot Me for pointing me in the right direction, I think I'll answer my own question since I think I know roughly what the problem was and what to do about it, if you use a Mac like me.

  (1) it is primarily a problem with scans, I received from ScanCafe.com, they have done a GREAT job but left something weird in there with metadata.

  (2) I went to the app store for Mac and bought this: Mac App Store - PhotoMill: batch convert, edit metadata, rename, resize, watermark and more

  (3) make sure that you understand about the file formats and how LightRoom manages metadata. In my case, I deal with JPGs and have LightRoom updated all the metadata automatically. If you are not familiar with this aspect of LightRoom, stop here and do some reading, you'll see why if you read on.

  (4) with closed LightRoom, I opened all the images of ScanCafe and essentially put the capture date, creation date, and modification date for the desired date, since I care anything else then will forgive for not work this up yet, but if you're like me and you have a digitalized picture just don't care when you analyzed the darn thing! Why change the date Mod? Because I don't know what I'm doing, so I just changed it, omniscient mod date will reset to the date I do other changes to this file, no biggie, I took just a shotgun approach because I was frustrated.

  (5) very important, once you're done editing all stamps date and time of all the images of your bad conduct, launch LightRoom and select all the images you just edited the metadata, then right-click on one of them and select metadata / reading

  (6) it warns you that you go to the wire of the writing of metadata in the catalog for these images, which shouldn't be a problem, because you have read step 3 above and you know that all the necessary metadata has already been written in the files. If you're good. Say very well and let it read disc and begin to sort correctly.

  Thank you all, sincerely. Drinks on me at the World Famous Magic Castle in Hollywood for your help johnrellis and Just Shoot Me tell you when.

  Your friend for life,

  -Michael

• Two cameras will synchronize together to help sort by Capture time

  Hello ~

  I recently used a second shooting game for the first time at a wedding I shot, and I tried in vain to get them to be sorted in Lightroom using Capture time. I changed the time to match already and it worked, but when I sort these photo by capture time, it only sorts camera 1 hour of capture, followed by camera 2. It not sync the time of two cameras together. Does anyone have advice? I scoured the internet for the answer to this all day today and yesterday and can not get help!

  Just a guess... perhaps the day is not set to the same value, or time zones are not properly defined or something like that

  But if you're not going to show us a screenshot, show us the date and time, so we can diagnose the things

• Thunderbird timer does not not on Win10 when iconed

  I'm running 38.2.0 on Win10 and noted that if Thunderbird is iconed it does not check the stack of mail on my ISP. Once I bring him to a window apparently the timer starts up and finally he reached 10 minutes and check. I guess something about the software suspends in Win10 or 38.2 hangs the timer. Given all the other bugs in Win10, that's probably the problem of MS, but I thought I better document here nevertheless.

  Gajdar,

  This problem stop you when you updated to version 38.3.0?