Sort descending using development tools Dimension

Similar Questions

• Prevent the owner of the schema using development tools

  Hello world

  We are doing some tasks to meet the PCI DSS requirements. One of them is preventing the schema owner to log in using development tools (TOAD, sqlplus, plsqldev, SQL Developer...). I found a solution here:

  http://kamranagayev.com/2009/10/04/block-developers-from-using-Toad-and-other-tools-on-production-databases/

  But as comment said, if we change the name of the .exe file, we can easily connect. I thought to do info = module, no program info. I tried with no success. I read somewhere that in after logon, the client info trigger is not set completely. So that we can't get info module exactly after logon trigger (I tried and I have seen this module was same as program interviewed since the session$ v).

  Another comment suggested that we allow some programs to connect instead of refuse many unauthorized tools. I think it is a good idea. But I wonder if some guys know rename tool dev as our authorized tools and it can connect.

  If anyone has any ideas or solutions, please help me. Thank you.

  One solution is to use two schemas - detail a. has no privs assigned to it (not even CREATE SESSION), but contains all of the objects (tables, indexes, views, code, etc.). Diagram B does not all objects, but given privileges to operate on the objects belongs to priv a. withdrawal CREATE SESSION from scheme a scheme b (in for example Prod) will achieve your requirement.

• I'm ready to get Firefox because on several occasions, Notepad opens whenever I have to shoot anything and at no time have I ever used the Web Developer tool

  Have used Firefox for many years on several computers. On the Home Office whenever you need to CAP a letter, notebook open instead. Every time!

  It is only on this one computer, none of the others.

  I completely uninstalled, cleaned and purged Firefox from this computer several times. I ran several virus checks. I did reset the Firefox multiple on several times.

  Yesterday, I uninstalled completely the slightest bribe related to Firefox I could find on the system, made a clean to get rid of the hidden files and duplicate system, and with what I was hoping it was a clean system, reinstalled the latest version of FF, same problem.

  WHY Notepad comes up whenever I hit the Shift key?

  Somehow the developer tools and notebook always see and in the end, the problems start again.

  Hello Mark,
  I can understand your frustration with this problem - especially after you run on this issue after you have reset your computer too.

  Can you please check if Notepad is in place, if you turn off the devtools.scratchpad.enabled parameter by setting the value to false. You can do so by following the instructions in the Mozillazine on changing the configuration of Mozilla editing about: Config

  Thank you

• What is the main development tool for designing an Essbase?

  Which are below or other is the main development tool for designing an Essbase?
  1 Essbase Studio Client Console
  2 Essbase Integration Service Console
  3 Essbase Administration Console Service
  
  Essbase Stidio exists only in version 11, EAS can be used to modify a cube for sure, but at the beginning, status to set up a cube, seems we have to use another tool for the design of the Essbase Cube. HIA is the tool for developing the cube from RLDB. But after Essbase Studio appear, seems Essbase Studio is a powerful tool for developing a CUBE, but I can not find the method to create the attriibute dimension and the place to associate dimension attribute of standard dimensions with Essbase Studio Console?
  
  I'm confused, what tool is the most powerful to create a CUBE which include: alias, formula, attribute protected association and UDA years?
  
  Please advise, thank you!

  user2571802 wrote:
  Essbase Studio appears, seems Essbase Studio is a powerful tool for developing a CUBE, but I can't find the method to create attriibute dimension and the place where
  Associate dimension attribute of standard dimensions with Essbase Studio Console?

  Reading of:- Re: Esbase Studio question - how to put in place the protected attribute?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Next page causes contextual developer tools: how to stop?

  FF 41.0.2, the Inspector of Developer Tools window appears whenever I hit Page Down. How can I stop it? I have already enabled devtools.inspector.enabled false, but this has no effect.

  What locale of Firefox you are using?

  This also happens with the settings regional en-US?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start the computer in safe mode Windows with network support (on the startup screen, press F8) to see if it has an impact.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10

• How to open development tools in the same window rather than in a separate window?

  At the beginning, the development tools used to open the bottom of the browser window when I press Ctrl + Shift + I. But then one day I opened it in a new window by clicking on the button in the upper right. Since then, the tools of the developer always open in a new window. I want them to open in the same window down as before. But I am unable to do so.

  Hello, click the anchor at the bottom of the browser window in the top right of the window or otherwise enter Subject: config in the address bar of firefox (confirmed the message information where it appears), search for the preference named devtools.toolbox.host & right click and restore the default value for that entry.

• silent uninstall ODAC 12 c module 4 and Oracle development tools

  Hi all

  I need to uninstall a previously installed ODAC 12 c module 4 and Oracle Developer Tools silently. Oui\bin\setup.exe will be fine uninstall, but I want to uninstall it from script.

  There is no button to save a responsefile at the end of the dialog box.

  oui\bin\setup.exe-Enregistrer FichierDestination - odacr4 - deinst.rsp

  Does not complain, but does not record a response file.

  Installation notes describe uninstall them, but not without supervision/silencer.

  Any advice?

  Best regards

  Niels Jespersen

  Here's what I used to silently uninstall ODT with ODAC. It does not require a response file, but requires that you specify the Oracle home

  "{' C:\oracle\product\12.1.0\client_1\oui\bin\setup.exe-silent - waitforcompletion - nowait - uninstall" DEINSTALL_LIST = {"oracle.odac.client","12.1.0.2.0"} "' REMOVE_HOMES={"C:\oracle\product\12.1.0\client_1 "}"

  A log file is generated in C:\Program Files (x 86) \Oracle\Inventory\logs

• Removed Mcafee preinstalled and ran development tool but mcagent.exe is in the behavior of icon settings

  My computer could not install the updates of Windows because of missing or corrupted files. I used the refreshment to repair the damage that also restored to pre-installed Mcafee. I uninstalled programs and also executed Development tool. Mcagent.exe appears in the icon behavior settings. What is the Mcafee files left or malware? I had already run Malwarebytes and that he had removed the rogue system tool. I would appreciate help with this.

  

  Hi Dave,.

  Thank you for keeping us posted.

  Follow these steps.
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  (a) press the Windows key + R and type regedit to open the registry editor.

  (b) go to: HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify

  (c) in the right panel to find PastIconStream and IconStream, delete both.

  (d) close the registry window.

  (e) open the Task Manager by pressing Ctrl + Alt + Delete together.

  (f) scroll the list of processes, to find Windows Explorer,

  (g) in the lower right corner, click on restart.
  Now, check the Notification area.

• Oracle Developer Tools for Visual Studio needs an Oracle Client for the Windows Installation?

  Hi everyone, I need to know if Oracle Developer Tools for Visual Studio is in need of a customer Oracle for Windows installed

  Thanks for your time

  Yes, you have the Oracle Client. However, you don't need to install the Oracle Client separately. ODT automatically includes the Oracle customer in each ODAC installation.

  The next version of the ODAC have an ODT version that uses ODP.NET, successful pilot. This version is not longer an Oracle Client.

• Characters not visible (caused by hitting the bar space or TAB in PL/SQL developer tool) causing slow running query? and database with low performance?

  Hi all

  I need your help to get this issue resolved its urgent and I'm not able to get to the conclusion. Here is my scenario, I'm getting slow query runs because of some non-visible characters that are copied with the application of the PL/SQL developer tool. Please find below attached screenshot: Oracle_Issue

  

  Note: This non-visible characters are caused when we write the query then us hit the SPACEBAR or press TAB PL/SQL developer tool

  I use the developer tool PL/SQL to write or test the query. Now I take this request copy paste in my application of the company (who takes this query connects to Oracle or any source of data base, catch data and produce PDF reports for customers).

  Now, my client is the Oracle user when I write and you run this query by the PL/SQL Developer, it works fine, but when I paste in my Inbox feature request (reporting system) and run it, it runs slower and jams to the customer database. Now after a little research I found that when I copy the query directly from PL/SQL developer at my request, he copy some characters not visible (introduced when we press SPACE or TAB in PL/SQL developer tool when writing query) with the request, then I copy this query again to my box of the application Notepad and delete these non-visible characters. Now, after removing the non-visible characters again once I copy backup question in my application and run the query, it works normally. Please find below attached screenshot: Oracle_Issue 2

  

  So I think that the cause of slow performance is due to some INVISIBLE CHARACTERS present in the query.

  My application uses SQL server 2008-2012 at the backend to store data from different sources.

  Character set used: SQL_Latin1_General_CP1_CI_AS

  
  

  To write and test queries: PL/SQL developer tool

  My Client use Oracle 11 g

  Character set used: Normal character: NLS_CHARACTER: AL16UTF16

  National Characeter: NLS_NCHAR_CHARACTER: WE8WIN1521

  I just wanted to know the blocking process to the top of the database and the characters not visible how affecting slow running query of query database.

  Please let me know if I'm missing something or you need more information on this issue.

  Thanks in advance,

  HP

  Simple answer. No.

  Spaces and line breaks do not change the execution plan created. Does not plan to run slower or faster.

• Please can someone tell if google chrome development tool that emulates different devices provide a view Specifies how the site will be viewed on different devices

  Please can someone tell if google chrome development tool that emulates different devices provide a view Specifies how the site will be viewed on different devices

  All the emulators fail at something, so it is always best to test the real devices when you can.

  That said, Chrome and Firefox are quite close. One of the things bigger than don't miss the emulators in the browser is the function of auto zoom of smaller devices. Be sure to include the viewport with an initial scale of 1.0 and you should be fine...

  Generally emulators you what a phone with auto zoom see when this tag is missing. Some phone browsers also automatically link and add styles to things like phone numbers or dates, if there is no style associated with them are coming from css to your site. Dev tools will miss that also and sometimes it's a little surprising to see a bunch of links on your page when you never coded in a first time.

  Again, it is always better to use actual devices, you intend to support, to see what will actually make your site.

• How to identify the siebel custom index created from DB without using siebel tools

  Dear Experts,

  Please let us know how to identify siebel custom indexes that are created directly through DB. We don't are not sure on the customer tables had created indexes.

  Thank you

  Carine Ch

  Hello carine,.

  Thank you for using Oracle communities.

  Custom indexes created without using Siebel tools are not included in the schema definition in the Siebel Repository.

  Just for your information, these indexes are deleted during the upgrade of database. In order to preserve these indexes, add them to the repository Siebel using Siebel Tools.

  Now come to your query you have utility DBCHCK.

  DBCHCK is that Siebel provided utility to compare the logical schema in the Siebel Repository against objects in the physical Oracle database.

  DBCHCK must be run regularly to check the status of the Siebel business, especially after a release.

  DBCHCK can be useful to identify custom index added by the development team, but not added to the repository using Siebel tools.

  You can run it from a server in the environment. A performance by connection to the base. This should be run from the folder siebsrvr

  You can get more information from document following knowledge.

  How the Dictutl and the dbchck to run? (Doc ID 475677.1)

  I hope it helps.

  Best regards

  Chetan

  P.S. If one of the answers was correct or useful, it would be great if you can mark as appropriate help the other identified correctly updated.

• What version of Oracle Developer tools is installed?

  Hello. I have an Oracle 9i server, and I want to install Oracle Developer Tools for Visual Studio 2013. Can you please tell me which version should I install my projects to communicate with Oracle. I installed the xcopy Release 6 of oracle Developer Tools x 64 but I don't see the provider in the provider Visual Studio 2013 list. I need to intall something more? Version 12 does not support 9i. What can I do? My developer machine is Windows 7 x 64.

  There is no combination of development tools Oracle with the support of 2013 VS that will work with a 9i database.

  Do you really need development tools? (for example you create table adapters or entity templates?).  If all you need is the connectivity from code, an older version of ODP.NET (for example ODP.NET 10.2) should work with VS 2013.

  If you really need Oracle development tools, you must either use an earlier version of Visual Studio (and ODT 10.2) or you will need to use a newer version of the database.

• Installation of Oracle development tools

  I have a client machine with Visual Studio 2012 and I want to install Oracle Developer Tools because I want to use Entity Framework to generate classes from first data base of my Oracle Database 11.2.0.3 that I can use to access the underlying database content.
  
  I found the ODAC 11.2 Release 5 with Oracle Developer Tools for Visual Tools installation bits. I install it and it works.
  
  The question I have is that my machine has already Oracle Instant Client and ODAC (XCopy) installed, but Setup above seems to insist on installing all this yet once somewhere else. My question is whether or not it is possible to just install Oracle Developer Tools.

  I think you're asking:

  "If I can install a YES install (Oracle Universal Installer) 11.2.0.3 in the same location where I installed a 11.2.0.3 XCOPY release?

  If this is your question, the answer is no. If a product is YES only, as ODT is, you must install it in an Oracle YES official home. You can not install in an XCOPY installation location.

  Apart from the extra space is required, this should not have an impact.

• Apex development tools

  Hello
  
  Any suggestions of good development tools Apex 4.0?
  
  Thank you!
  Kind regards
  Cearnau Dan

  Dan,

  I use SQL * Developer to test my code PL/SQL and SQL statements. This tool can help you for the tests as well.

  Robert
  http://apexjscss.blogspot.com