Sort the graphic element in rtf BEEP model

Similar Questions

• Rtf BEEP model: how to display totals for main group in subgroup

  Hello

  The main group: order form

  Subgroup: Work order

  Sup subgroup: good command required for the order of business (subgroup)

  I want to show the total amount of PO in subgroup highlighted in yellow. Please provide resolution

  

  Thank you and best regards,

  Satya

  Please use the code to get the total amount of IN. below

  Model attached RTF.

  Also, I noticed "$" is hardcoded to the amount field is not just, I modified the display auto field currency format as shown below

  

• Interactive Reporting - why all the graphic elements are set Enabled = true?

  Hello
  
  I have another question about Hyperion IR. When I put one of the widgets on the dashboard, Im not able to set enable = false (or disable = true) on this element. As the code
  textLabelElement.Disabled = true;
  has no effect.
  When I look at the properties of this element, there activate checked and grayed out on the first tab. It is not interchangeable.
  Why is it so and there at - there a work around?
  
  Kind regards
  Paul

  A textlabel can technically be "enabled" or "disabled". If you need a control that has this feature, use a command button.

  If you don't like the way the command buttons are, you can use lines and rectangles of textlabels to build your own, but you will need to write code to manage their behavior. An example would be a textlabel with a black font on top a textlabel with a cast iron grey. When you want to 'disable' button, just to hide (textlabel. Visible = false ;) the black police.

  If your users require frequently buttons that look or behave differently from the standard ones, you can design an object that generates your custom Help button and defines its properties and methods. I did this to make a progressbar and it works very well.

• How can I find the graphics controller on my PC model number?

  I have really no idea

  I have no driver installed and it must find this model number to get a

  I'm desperate @ technology

  If anyone can help me, it would be greatly appreciated

  Thanks for your help. I discovered how you can do this through Windows

• Bought a HP15 g009AX but can not find a driver for the graphics card

  Hello

  I bought a model of flipkart HP15 g009ax a week, but I can't find any drivers, I istalled Windows 7 64 bit. The problems that I face are below:

  (1) find the driver for the graphics card Ati amd 8570 M cant

  (2) among the three USB ports work alone

  (3) cannot turn down the brightness of the screen

  I tried both links but below its still does not not for me.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=7101...

  and

  www.PCIDatabase.com

  Help, please.

  OK... time to be creative, and I think it will work...

  We will manually install the graphics driver W8.1 your model use.

  Use the following steps to manually install the graphics driver...

  Run this graphics driver W8.1...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135683-1&cc=us&DLC=en&LC=en&OS=4158&product=7255430&sw_lang=

  Go to Device Manager and click to expand the category graphics cards.  Click on the VGA Standard card.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp67327.

  Make sure that the include subfolders is selected and the driver should install.

  Reset.

• Unable to get games to recognize the graphics card.

  Hello.

  I have a HP Pavilion dv7-6c50ca Entertainment Notebook PC

  I have had for almost a year. It is still quite shiny and new and I love it, but there is an annoying problem, I keep turning once in a while. Specifically, I bought this laptop on another model with more processing power because the secondary dedicated graphics card with which he came was much better than the graphics cards in all other models. It has a

  Radeon (TM) HD 7690 M XT, which is not really stellar, but has been well evaluated and a good report quality / price of the laptop. The problem is, I never actually using it when I play games because they always try to detect my hardware automatically and don't find that bed in the graphic chip intel supplied with the processor. I always go in the Catalyst Control Center to change it to 'high performance', but seems not to do anything. I checked the support for some of these games and they had some suggestions for fixing it, but so far without success. Is there anyway I can force the laptop to give priority using the Radeon all the time? I am not concerned about power because I usually take the power cord with the laptop everywhere. (It's a computer 17 "laptop and relatively heavy, so I am really confused by the extra weight of the cord).

  Long story short, none of my games seem to find my good graphics card, intel only shit one. How can I fix it.

  I understand that the Intel card is the only option for the games that select the video card before the launch of the game.  To check, make games that do not select the card before the game starts work with the AMD card?  Just to note, switchable graphics of AMD system will use an AMD card with OpenGL programs.  See this document for more information on OpenGL.

  Make sure you have the most recent BIOS.  I doubt that your system will have this option (few do), but go into the BIOS and check the section of configuring the system for a fixed mode option.

• How to hide/show the individual elements in a document

  I try to hide all items in a document (and store each original visibility state), iterate the elements preselected user and perform an export for each item in the selection (I've got this covered part) and finally restore the visibility of each new item state (where the initial visibility state storage is necessary).

  I found that I can browse all the elements in the document to help

  app.activeDocument.pageItems[i]
  

  where i is the page element identified by the index of the i - th in the pageItems collection.

  What is not clear, however, is how to get the visibility of this element of the page state. Indeed, there is a visbilityVariable of property associated with the elements of the page, but when I try to 'control' the content with an alert message, I get "undefined".

  Is there the best ways through all elements in a document? Ideally, I would like all the elements of access regardless of the weather, they are elements of the path, group items, items of text frame or what have you. I need this collection in the State of visibility of each item read/write. Thank you!

  "visibilityVariable" is for "data-driven graphics", regardless of those who may be. Try the property 'hidden' instead.

  JoarBolstad wrote:

  Is there the best ways through all elements in a document? Ideally, I would like all the elements of access regardless of the weather, they are elements of the path, group items, items of text frame or what have you.

  Don't worry, you got it right first time. 'PageItem' is the global superclass of all the graphic elements. Starting from the ESTK help (rather, my version as well):

  PageItem class
  A page element object.

  Superclass of CompoundPathItem, GraphItem, GroupItem, LegacyTextItem, MeshItem, NonNativeItem, PathItem, PlacedItem, PluginItem, RasterItem, SymbolItem and TextFrameItem

• How the XML element used in RTF PUBLIC/PRIVATE? I know how to hide columns in RTF, but do not know how to generate xml below way. Help, please.

  Hello

  I'm following link below to show/hide my columns dynamically. See "formatting of column.

  http://docs.Oracle.com/CD/E12844_01/doc/BIP.1013/e12187.PDF

  According to the doc element can be made in private/public.

  <items type="PUBLIC">
   <item>
    <name>Plasma TV</name>
    <quantity>10</quantity>
    <price>4000</price>
   </item>
   <item>
  

  And even can be used to hide the column with the help of State

  <?if@column:/items/@type="PUBLIC"?>
  

  MY QUESTION IS HOW TO DO THIS IN MY XML BELOW?

  Here's the part of my XML code that I use in the definition of the data to RTF.

  <group name="GH3" source="QH3">
  <element name="COLUMN_HEAD3" value="COLUMN_NAME" /> 
  </group>
  <group name="GH4" source="QH4">
  <element name="COLUMN_HEAD4" value="COLUMN_NAME" /> 
  </group>
  

  I'm out like that.

  <LIST_GH3>
  <GH3>
  <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
  </GH3>
  </LIST_GH3>
  <LIST_GH4>
  <GH4>
  <COLUMN_HEAD4>XYZ</COLUMN_HEAD4>
  </GH4>
  </LIST_GH4>
  

  In order to use the logic according to the oracle document I want output like this.

  <LIST_GH3 type="PUBLIC">
  <GH3>
  <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
  </GH3>
  </LIST_GH3>
  <LIST_GH4 type="PRIVATE">
  <GH4>
  <COLUMN_HEAD4>BLANK</COLUMN_HEAD4>
  </GH4>
  </LIST_GH4>
  

  Should what changes I make in my XML to get the result of the execution as above? Help, please. Where should I make changes in the XML above? Name of the Group? Name of the element?

  I intend to use it under condition in RTF model to hide the column, but do not know how to set the column as PRIVATE/PUBLIC type in the XML output that is used to populate the data in the RTF while running.

  <?if@column:/BTSPIEXP/LIST_GH3/@type=”PUBLIC”?>COLUMN_HEAD3<?end if?>
  

  Kind regards

  Patricia K.

  Hello

  Problem has been resolved. I used the value of the item to determine whether to show it.

  Kind regards

  Patricia K.

• With regard to the RTF model: enter the commands in your RTF model

  Hi all
  
  
  
  I read the Oracle Documentation saying: "entry of the orders in your RTF model."
  
  
  I tried to look at this one, I have a requirement.
  
  Really how can I enter the commands in RTF model. I didn't get this one a lot.
  
  Any help is very appreciated as always :)
  
  Thank you
  Xavier

  Well, my OPE user's guide did not have the mentioned pages but I watched this guide: http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12188.pdf

  and given the documents, you need just to include controls in a form field in the foreach loop for the element you want to split the document by... You could insert a form field and then double-click the field, go to the properties of Word-> add-> the status bar help text and change the code following the instructions in the guide.

  Hope that helps.

  Bipuser

• Why Responsive mode Design might disagree with the box of the HTML element model?

  In the web page, I am writing right now, number of width of the sensitive design view does not match the width specified in the view of the box model (meaning that my questions of media do not seem to be triggered the breakpoints of good width). See the attached screenshot that displays the Appointment page, view the box model and a ToolTip with dimensions of the HTML element.

  I have yet to reproduce it in a simpler page, although I'm still trying. I dismissed the possible influence inland iframes and the viewport metatag.

  So, I would like to know what could cause two tools to account for the figures of different widths.

  See you soon,.
  Jordan

  said jscher2000

  Ah, I tried using 38.0.5.

  This could be a problem of zoom?

  Oh! That's all! I was slightly zoomed-out and after a Cmd + 0, RDV now accepts exactly with the box model, and queries of the media are behaving as they should.

  Quick Note: the zoom was causing a second problem, since she has been scaling 430px for a number between 481px and 480px wide, triggering neither of my media queries (which had max-width: 480px, the other min-width: 481px). It was almost as confusing as the numbers is not the first place.

  Thanks again!

• Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

  Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

  The "General" cloud requirements are quite low... so you have to ask in the forums of specific program for a special features used by individual programs

  For video editing Premiere Pro, go read it in community: Forum Hardware | Adobe Community

• If we can reuse the Configuration element already created in the model of the ATO... ?

  Dear all,
  
  Please note that we started using the model workflow ATO for order management.
  
  Its been noticed that every time when the configuration is done, it creates a configuration item, which will be there in the master of the order of the day.
  
  In our business case, we can have different configurations each sales order. In this case,.
  
  Is there a way that we can reuse the same once its created configuration... ?
  
  Please update... ?
  
  Thanks in advance...

  Corresponding CTO can be lit. With running, if the same options are selected on a second sales order, then the CTO process will use the existing element rather than create a new item.

  There are several options to enable the corresponding feature. There are profiles that turn it on to a site... or corresponding level can be configured to work only for specific models (via an attribute of the element).

  For more information about the corresponding feature of CTO, see Configure Oracle Guide ordering process to:

  http://download.Oracle.com/docs/CD/B34956_01/current/Acrobat/120ctopg.PDF

  Thank you
  Jason

• strange monitor beep sound and blank when I installed the graphics card XFX Radeon HD 7870

  OK, so I removed my GTX 555 after that I bought a brand new XFX HD 7870, installed and activated on the pc.
  The monitor was empty and the pc tower was 5 beep sounds, then pause and repeat, over and over again until I turned off. When I replaced the GTX 555, all was well again, so I know this isn't the other components.
  Any suggestions?

  See http://products.xfxforce.com/en-gb/Graphics_Cards/AMD_Radeon%E2%84%A2_HD_7870/FX-787A-CDFC.

  You will need an adapter and you may need a new power supply.  Note the minimum requirement of the PSU of 500w.

• Can I create flyers of club using the 10 Elements? Are able to do software?

  Can I create flyers club post on facebook using the 10 Elements? Are elements software able to do this project? Thank you all!

  

  jrdakine wrote:

  Thanks for your reply, I'm new to this sort of thing. I wanted to create flyers and my own photos or pictures on the web, Word will be able to handle the graphics or item 10 would be better. Thank you

  This kind of prospectus Im looking to do... Thank you all!

• Inserting Image mystery using the attribute in the structured element

  I work in FM10 on Windows XP Pro. However, the models at the company where I am currently Contracting have been developed over the years, since the FM 7 or 8, with different authors and developers to refine their. Which makes them difficult to decipher at times.

  Currently, I'm trying to understand how elements of the notes works so I can fix it to work when you bind the FM source files to RoboHelp. When you click on the 'Note' parent element, you can choose from four different attributes (as shown below for ESD): note, tip, caution and warning.

  When you choose one of these attributes, it automatically inserts a graphic symbol (exclamation point, star, pencil, etc.). You then choose the next child element that creates a paragraph directly to the right of the graphic symbol.

  The problem is, I can't understand where this chart comes in the parent element and associated attributes. I thought it must be extracted from the style of paragraph, either as an image of the reference page and or symbols of the numbering of the paragraph Designer section. But I'm not either of those things anywhere. For what it's worth, the graphics look like they come from a police (see screenshot).

  The word "note" comes to the next child element and the associated paragraph style, it is designated in the numbering/AutoNumber Format: box with an associated font. The lines above and below it are similarly advanced/Frame Above / Below the FMP: setting. All this is quite easy; the attribute image... not so much.

  Can anyone tell me please where to hunt for the source of this image attribute insertion?

  ------------------------------------------------------

  ESD

  Element (container): Note

  General rule: stalks, NoteBody

  List of attributes

  Name: Id ID Unique in option

  Control flags: read-only, hidden

  Name: Type Optional choice

  Choice: Note, tip, warning

  Default: Note

  AutoText

  Insert automatically child: stems

  Element (container): NoteBody

  General rule: Para, (Para |) List) *.

  AutoText

  Insert automatically child: Para

  Element (container): stems

  General rule: < EMPTY >

  Text format rules

  If the context is: * < ParagonGuide

  If the context is: Note [Type = "Note"]

  Use paragraph format: Note.Icon

  Otherwise, if the context is: Note [Type = 'Attention']

  Use paragraph format: Note.Caution.Icon

  Otherwise, if the context is: Note [Type = "Tip"]

  Use paragraph format: Note.Tip.Icon

  On the other

  Use paragraph format: Note

  Rules of prefix

  If the context is: * < ParagonGuide

  If the context is: Note [Type = "Warning"]

  Prefix: Warnings not permitted in documents of Paragon.

  Range of text.

  Font properties

  Color: Red

  On the other...

  Hi Douglas,.

  I think I thought about it, although I can't prove it, but my inability to prove it is maybe the evidence itself. I know this is no logic, so please read on...

  In summary, I think that the images are caused by prefixes text inserted by ESD for the element, using the Zapfdingbats font.

  To review/summarize the structural architecture, your notes are made up of

  ... etc.

  ... Where he is the element which is containing the image and the , etc. items that contain the text of the note.

  My first idea was that when I open your file, I do not see the images; However, instead of one of the pictures missing, I get a message of missing fonts (and I have no Zapfdingbats). Here are the rules of prefix for the element (rough paste):

  Rules of prefix

  If the context is: *.<>

  If the context is: Note [Type = "Warning"]

  Prefix: Warnings not permitted in documents of Paragon.

  Range of text.

  Font properties

  Color: Red

  On the other

  Range of text.

  Otherwise, if the context is: *.< (list="" |="">

  If the context is: Note [Type = "Note"]

  Prefix: \t/

  Range of text.

  Font properties

  Family: Zapfdingbats

  Size: 22.0 pt

  Vertical offset: 28.0%

  Otherwise, if the context is: Note [Type = "Tip"]

  Prefix: \tH

  Range of text.

  Font properties

  Family: Zapfdingbats

  Size: 16.0 pt

  Vertical offset: 22.0%

  Otherwise, if the context is: Note [Type = 'Attention']

  Prefix: \t!

  Range of text.

  Font properties

  Family: TheSansExtraBold-Plain

  Size: 32.0 pt

  Vertical offset: 48.0%

  Otherwise, if the context is: Note [Type = "Warning"]

  Prefix: \t6

  Range of text.

  Font properties

  Family: Zapfdingbats

  Size: 16.0 pt

  Vertical offset: 24.0%

  On the other

  If the context is: Note [Type = "Note"]

  Prefix: /.

  Range of text.

  Font properties

  Family: Zapfdingbats

  Size: 22.0 pt

  Vertical offset: 28.0%

  Otherwise, if the context is: Note [Type = "Tip"]

  Prefix: H

  Range of text.

  Font properties

  Family: Zapfdingbats

  Size: 16.0 pt

  Vertical offset: 22.0%

  Otherwise, if the context is: Note [Type = 'Attention']

  Prefix:!

  Range of text.

  Font properties

  Family: TheSansExtraBold-Plain

  Size: 32.0 pt

  Vertical offset: 48.0%

  Otherwise, if the context is: Note [Type = "Warning"]

  Prefix: 6

  Range of text.

  Font properties

  Family: Zapfdingbats

  Size: 16.0 pt

  Vertical offset: 24.0%

  There are a whole bunch of prefixes text in there, but most use the Zapfdingbats font. This font is just a bunch of small icons as pencil your screenshot shows the image. For example, the line:

  Prefix: \t/

  .. .will be insert a tab, then a slash in Zapfdingbats. I bet that if you apply Zapfdingbats to one of you to the paragraphs, and then type a forward slash, you will get one of those pictures you've been see.

  The evidence would be to change these characters in the prefix rules and see if the images change. Because I have not the police, I can't do it. But because I can't do, it proves to me that the source is indeed the police and the prefix characters. Make sense now?

  Russ