Unable to get games to recognize the graphics card.

Similar Questions

• Re: Unable to play games because of the graphics card

  Hi all...
  I'm on Toshiba Satellite L40-18W-PSL4CE model 00H0000GAR...

  I'm not able to play games... If games start it says unsupported graphics card...
  I use 1 GB of RAM... In my view, that there is no available external graphics card...

  Please help me

  Hello sow

  Satellite L40 is certainly no game machine. In my view, that it runs with minimum of RAM for Vista and you must not surprise that you can't play games.
  I don't know what games you want to play, but try it with an older one like FarCry or Maxpayne1. Maybe it will work.

  For newer games, this laptop has certainly no enough power.

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• Satellite P - games do not recognize the graphics card

  Hello

  My Satellite does not recognize the GT540M Nvidia when I play a game, simply select the embedded (Intel HD Graphics Family). I have already installed the drivers of toshiba and the nvidia site Web site.

  What should I do?

  Hey Buddy,

  > nvidia Web site.
  I recommend you to install display drivers Toshiba that only they are pre-tested on your system. This could be the reason why games don t recognize your graphic card. Then please remove the nVidia and download the latest driver of Toshiba display.

  In addition, it would be interesting to know which laptop computer, the operating system and the games you have. Otherwise, it would be a never-ending story ;)

• Windows 7 does not recognize the graphics cards

  I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

  In "Device Manager", it shows two units operating as VGA standard with no details etc.

  It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

  Any ideas or help... Please also stay simple for a non PC Geek

  No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

  It of free and worth to be using,

  http://www.Macrium.com/reflectfree.aspx

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• 2015 CC Photoshop does not recognize the graphics card GeForce 850 M

  The NVIDIA Control Panel settings do not solve the problem. When I use global settings, Photoshop recognize only the Intel card:

  

  
  

  
  

  And when I put "High Perfomance... ", Photoshop does not recognize the graphics processor (the processor settings graphic is completely disable):

  
  

  
  

  Adobe Photoshop CC GPU (graphics processing unit) and card FAQ video

• Unable to get PC to recognize the camera from Nikon s3300.

  We just bought a Nikon s3300 camera and can not get our PC to recognize it. Whenever we try to install the software, we get an error message telling us that we are missing a file ptpusb.dll and that we should insert the original XP discs. We have not what the computer was XP is already installed. I tried several programs repair/recover for free available, but none worked. Also, I reloaded the last sp3 for XP hoping this would provide that missing the file, but it doesn't work anymore.  Does anyone have any suggestions to solve this problem? I noticed on the internet, that this is not a rare problem with certain digital cameras and XP, but nowhere can I find someone who seems to know the answer!

  original title: lack of ptpusb.dll

  OK here's what I discovered - I discovered a lot of people who have had this same problem when trying to install a relatively new digital camera on XP. I'm not an expert, but the common theme seems to be that one of the 2 dll files are required by the camera to work via the usb connection, and for some reason that I do not understand that they are not easily identifiable or pre-installed when it connects for the first time. The files are ptbusb.dll and/or his sister c:\windows\system32\ptpusd.dll of the file. According to several sites that I contacted, these default files shoud is in at least one of these places - c:\windows\system32 or \system32\dllcache or c:\windows\drivercache\i386. However, ptbusb.dll was not in one of these locations on the version of XP that I was working, even after reloading of the pack SP3 and after looking all hidden files.

  In the end, I went to www.dll-files.com. This was one of the few sites I found that would let me just to download a zip file with the file that I wanted (with file note on how to install and where), without having to sign up for some sort of remedial program that eventually I would have had to pay for.
  I've copied this file to windows\system32 first and does not need to put it anywhere else, because after this, the camera was immediately recognized and the problem disappeared.

• Windows 8 not to recognize the graphics card NVIDIA

  Separated from this thread.

  Hi, why you mention windows activation? He didn't speak in his original position.

  I ask because I recently had to replace my hard drive in Thailand, they put an and somehow has a copy of Windows 8 but I have exactly the same problem as the OP with my graphic works not properly. I can't dim the screen, HDMI cable does not work and when I tried to play Minecraft it told me that my drivers are mistaken.

  Thanks for coming back. Yes, it could be hardware problem in this scenario. You can also visit the manufacturer's Web site and install the update manually. Sometimes even scan does not show the updated drivers. Download the driver on office and try to install the driver in compatibility mode and check if it makes a difference: http://windows.microsoft.com/en-US/windows-8/older-programs-compatible-version-windows

  Keep us informed.

• I get no cd for the graphic card drivers, webcam & bluetooth driver with g6-1139tx.

  HP Pavilion G6-1139tx

  Win-7 32-bit

  need hardware accelerators on or last update of installed drivers.

  Hello

  Drivers and software for your laptop downloads do not exist on your Product Support page here.

  Kind regards

  DP - K

• KKKKK displays an error message with the graphics card during the installation

  My laptop is a DV6 6121tx with QB367PA #ACJ product number.

  During the installation of kkkkk, it displays an error saying not able to recognize the graphics card in the system.

  Please suggest an update secure for the soul if they are available.

  HP support assistant details of my graphics driver:

  Radeon (TM) HD 6770 M

  8.882.2.3000 (30/09/2011)

  Hi champakBhumia,

  Welcome to the HP forum!

  Here is a link to the HP Pavilion dv6-6121tx Entertainment Notebook PC specifications and HP Pavilion dv6 Notebook PC Maintenance and Service of Guide , which will provide a recommended list of replacements.

  I hope this helps.

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.