SOUL Blu - Ray h.264 transcoding of 19 GB files.  Still showing project 47GB size?

Similar Questions

• Yet 5.1 on OS 10.5.8 burn Blu - ray discs, but crashes during the generation of the same project DVD

  I spent a few weeks creating a Blu - ray disc double layer with 20 menus and 44 timelines lengths ranging from 18 minutes 9 seconds.

  The final product will be a double pack containing the replicated Blu - ray Disc and DVD.

  I have pre-transcoded DVD and BD and related assets proper. The Blu - ray Disc built properly and seems to have no problems.

  When I try to output in DVD Encore crashes almost immediately. I also tried to record just a DVD image, and it crashes at the same place.

  I don't really want to recreate this entire program in DVDSP, but that's my plan.

  Other ideas would be appreciated.

  Thank you!

  So I solved the problem by removing all the ac3 and m4v (including the related m2v) records on the SNA timlines replacing the original self-contained reference movies from FCP7. Then, I left still transcode and build from one day to the next, hop in the DVD to work one morning.

  Now, I just need to transcode again for the Blu - ray or return to a backup...

• PR and SOUL 8.1.0 export H.264 Blu - ray creates malformed xmpses file

  Posting this here at PR, but this applies also to the SOUL. The bug report has been coded to the SOUL. The only symptom may be import in yet. See the problem report and bug in this thread: Re: Re: still won't import markers with exit vid first through Media Encoder bluray

  Bug report filed. This seems to affect Blu - ray H.264 exports PR 8.1.0 directly or through SOUL 8.1.0. It does not affect the MPEG2 Blu - ray. The only symptom identified so far is a failure of the files to import into Encore without deleting the file xmpses, which translates into loss of chapter markers. A possible workaround is to edit the xmpses file.

  This has already been identified as a bug? Are there other consequences?

  Hey Stan,

  Stan Jones wrote:

  This has already been identified as a bug?

  Yes, I spotted in our database. If all goes well, we should get a fix for this in the near future.

  Stan Jones wrote:

  Are there other consequences?

  The main problem is that if the user deletes the xmpses file, all data markers will be lost.

  Hope that helps,

  Kevin

• ProRes to H.264 Blu - Ray, then get an overview of the problems with Encore CS5

  Hi all

  I've been holding Media Encoder CS 5 90 minutes or so ProRes 422 (29.97 interlaced) QuickTimes and create Blu - Ray H.264 files for use in Encore CS5.  I use the maximum of 1080i quality setting and adjusting so that the target bit rate is 25mbps and max is 30.  By 2-pass VBR.

  The issue I'm having is when I import these files into Encore CS5 and then preview them on a timeline they are artifacts in all directions.  They look like my cable signal when it breaks upward, except through the whole program.  I have re-transcoded in Media Encoder and am having the same problem.  I also tried transcoding in Encore (which is really the same thing), and it still persists.  I did not a BD - R again to check it and I know that the preview in Encore CS 5 is very buggy.  But I wonder - someone ' one run in this?  Is this just a preview issue, or is there something really wrong with him transcode?

  Also, if anyone has a tip for where I can open the file *.m4v out Media Encoder so that I can check them somewhere else in again would be great.  VLC Player does not, nor does QuickTime.  Thank you all!

  Best,

  JD

  Compressor didn't start to make videos compatible h.264 Blu - ray up to version 3.5. Videos in h.264 Blu - ray made in the compressor before 3.5 are not compatible Blu - ray, fail strict checking of yet and must be re-encoded.

  If you are using Compressor 3.5 or newer, your Blu - ray h.264 files will import still very well and will not be re-transcoded.

• Renderer AE CS4 / Adobe Media Encoder will not create a container for h.264 blu - ray

  That is the problem.

  First of all, I tried to make a model using the inside the AE render engine using the blu - ray h.264 preset.

  It was supposed to create 1 file, but I found myself with 3: track audio, video and a file with the extension .xmpses.

  I then decided to make in .mov lossless, which works fine, but 03:40 minutes occupies more than 8 GB, which is obviously unacceptable.

  After that, I put the .mov file in Media Encoder to try h.264 blu - ray there.

  Absolutely the same *.

  I use the Mac in AE CS4 version.

  Here is the screenshot of the original .mov file and the result. As you can see, he refuses to make a container. This is absolutely unacceptable

  

  It raises another question: what settings should I encode the layout in 720 p resolution without taking up a lot of space?

  Well, it depends on if you need a master of production (something for broadcasting, for example, or to use as a source for the other tasks of coding), or if you want a version for distribution. If this is the first, there is nothing wrong with "plenty of room" - A Quicktime file with a PNG or Animation codec is a good idea, but it will take a lot of space. If it is the latter, H264 is perfect, but there is no built-in preset to take 720 material on the web.

  You could do this:

  * Choose the generic H264. You will see that it will give an error if you try to make, since the default setting uses a H264/level profile allowing you to use HD resolutions.

  * In the H264 video options, set the menu 'Profile' to 'Hand' and 'Level' 4.0. That will keep compatible for Quicktime and Flash player, while allowing larger heights and higher rates.

  * If you Webcast addressing the value flow target to 5-8 Mbps and Maximum flow at 9-10 Mbps. It's a little more that Apple uses to 720 p on the Apple TV content, for example.

  The screening of origin H264 will tell you in the comment field to expand to 640 x 480 output Module. It is useless, since you are using a profile/level combination that allows higher heights.

• Quality Blu - Ray

  I just started with 4096 output format support and I'm sorting out the workflow.  I did a test clip in Premiere Pro and exported to the H.264 format while keeping the size of 4096. The .mp4 file plays fine on my screen without any quality problem.

  Then I loaded this .mp4 file in Encore to create blu - ray disc.  All preferences are set by default.  I've been discs burning files 1080 for a long time and never had a problem.  But the disc finished this time is not read correctly.  When the camera pans with slowly the scene develops artifacts.  Or if the camera is still and the scene goes to the same thing happens.  For example when the camera is always and walks by bicycle by the image of the bike are doubled with a slight horizontal shift while the rest of the scene is perfect.  The TV and blu - ray player that I use are the same as always.  So the only variable in all this is the size of the file that I imported into yet.  I assumed the transcoding process would deal with the size of the source file.  Is it still possible just deals well with this file size?

  I am not normally files import multiplexed in yet, but when I I don't have never seen this problem.   I tried to export from Premiere Pro using H.264 Blu - ray preset to create split video and audio files, but kept the transcoding, that's another question I need to sort out.

  Any thoughts are appreciated.

  Thank you

  John describes the main reason you want to transcode twice.

  If you still use to transcode, make sure that you have configured to use the SOUL. Yet integrated in transcode engine, I believe, is still based on the old authorcore of sonic. In any case, not as good.

  My other thought here is one) something was wrong with the transcoding in Encore and b) something that happens when you want to encode from PR it will be easier the problems of the side PR/SOUL.

• Confused on the project settings for the Blu - Ray?

  Worked w\Encore (5.1) a lot of time as the DVD, but this is my first w\BR try so I want to make sure I get this right (thanks in advance for the help!).

  The project has a static image (1920 x 1080) and then several animate button video HD which will take you to a video loop "intro" at 1920 x 1080. On this video track, I have a pop-up menu (1920 x 1080 I guess?) which will allow you to select other videos.

  My questions;

  Static & pop - up menu is correct?

  The intro videos are 1920 x 1080 so no problem there, but the rest of the videos of the project (link to context menus) is all in SD (720 x 480 29.97) until the 'final project defining' should be?

  Thus, away from it all seems logical for me until I have to project default settings, they list it as the Blu - Ray (H.264), 1920 x 1080 & 29.97 FPS?

  I did a quick test of the only menu & intro videos and it converted the static menu in 1920 x 1080 29.97 but it takes 23.976?

  I imported a few SD videos say "do not transcode" according to BR.

  Still using the project settings for the menus and slideshows. So if you want a 23.976, then when you create a project, you can choose the frequency of images such as 23.976 in the drop-down menu in the default conversion settings.

  As far as video is concerned, if still says not to transcode, then he will write them to disk as it is and yet also creates a calendar based on the properties of the assets. If the dimensions of the asset are legal, then the dimensions of the chronology would be identical to that of the assets.

  -Riou.

• help with blu ray

  Hello

  I'm new on blu ray and would like some info please, I have a project edited with premiere cs4, export, I have 2 choices for blu ray-h264 bluray & mpeg 2-Blu-Ray, what are the main differences. Also will be present also transcode the project ready to be burned in yet? I'm looking for the fastest workflow, as I will be hopefully move to HD for most of my editing.

  other assistance would be good.

  concerning

  Baz

  Is there not a "do not transcode" or do you see it but you can not click on it? (not highlighted)

  If any of these questions should be your trouble, well, Yes, I would try a re-install.

  Not sure you will be able to uninstall yet only, I'm afraid you will have to re - install and first and SOUL... also.

  If it will be your decision follow these steps:

  (1) uninstall

  (2) run the uninstall program Adobe CS4 (sometimes you have to install a program to uninstall windows too, but it will ask you if necessary)

  (3) run the uninstall program Adobe CS4

  (4) performance Adobe CS4 uninstaller (points 3 and 4 are not an error)

  (5) disable all security software you have installed and disconnect from the internet (if you have a few sw relative could be a serious problem)

  (6) run the installation (better if it is full) the admin RIGHTS

  (7) go for dinner with the main actress of the film XDCAM (ops, no, you have to insert more than one disc) (in any way later...)

  (8) install the updates (I prefer download them and install as ADMINISTRATOR).

  Save updates will be useful for future resettlement (crossing fingers)

  I hope that did not fail all

  Ciao

  Giorgio

• export parameter to make panasonic SC - x 920 video 1920 x 1080 p 60 fps blu - ray disc

  I bought a camera panasonic SC - X 920 which pulls in 1920 x 1080 progressive 60 fps so I can make videos of 60 images/s to the internet and I know that you can get up to 30 p videos but what I read a real blu - ray disc doesn't support 60 fps are my project for my video setting (1920 x 1080 59,94 frames per second) progressive). The video plays well in my project, but I don't want to make the folder incorrectly waste blu - ray discs, and my intention is to import this export in yet to do a blu - ray disc. I first pro CS6 and I realize there is a tab that you can select to match the sequence parameter to export, should I use it and then import my video into still and let him face or is there a better setting? I know still takes forever to encode and would like to do the encoding first so this recall is not necessary to code. With my video should I select blu - ray h.264 preset and then make a video to 29.97 1920 x 1080 interlaced? Should I choose a higher or lower field to deinterlace? Or should I make a mpeg-2 blu - ray and all let be set automatically according to the parameters of the project? I don't know exactly how I should go to this progressive 60 fps video a 30 (29.97) fps video to make it compatible so that I can burn to blu - ray disc. Could someone help me please, my research has not turned up to definitive answers.

  None of your images is 1920 x 1080, but you can't put it on a BD - 60 p.

  If you want to keep the 60 p you export to 720.

  Here are the formats that still supports:

  Still supported formats Blu - ray

• Clarification of passthrough for the Blu - ray AVCHD

  Hello

  I think that clarification on AVCHD, Blu - ray passthrough must come from someone from Adobe, that can give us the last word on that.

  From what I understand a number of positions that have dealt with it, the ONLY way to get from AVCHD directly on Blu - ray in Encore without transcoding, is to import a raw AVCHD (unpublished, non-limited) file in yet as a timeline.

  Throughout, I thought I could use Dynamic Link to import a P AVCHD Pro sequence that would not need to be transcoded. But I was not able to do. Even if it is cuts only with no effect or a different kind of files.

  I was able to import the files that I used in that order in yet, and then I get the message that the 'Blu - ray transcode status' is 'do not transcode.' But I was not able to get this message using any other workflow. And it is clearly not a viable solution for most situations.

  Everyone was able to bind a sequence P Pro and do a passthrough to Blu - ray without dynamically transcoding? If so, you give us an overview of how you did?

  Thank you

  Jeff Sengstack

  If there is a way to go from P Pro to Blu - ray without transcoding.

  Not at the moment.  (At least, not if you first change it.)

• Error in the construction of Blu - ray

  Friends:

  I hope you can help me.

  I did an autorhy Blu - Ray with Encore CS3 from a HDV file concerned in this program of Premiere CS3.

  Everything works fine, but more or less after 4 hours of construction process of the folder, it pops up an error that says:

  'Yet', error: "invalid format", Code: "14", it reviews "0 x 00010006-progressive_sequence" invalid for the resolution of the video

  The thing is that it is recorded, edited and exported in interlaced and "has nothing"; 'progressive '.

  Someone you know that will be the problem?

  Thank you

  (Sorry by the English I use)

  He should not have to re - transcode once you bring it in again. You create a disc NTSC or PAL? Make sure your project settings are the same as your source. Once you bring him in again, the status of transcoding Blu - ray assets should say "do not transcode. If so, then something is not set correctly, or you have no transcoding in the proper format.

• . Not legal for blu-ray/dvd DTS! Help, please

  First of all, I would like to thank in advance anyone who can help me solve this problem.  I've been looking through tutorials, google help on this, and nothing helps, I was not able to get .dts to burn to dvd or blu - ray.  I have all my goods in order and when its time to build the project to dvd/blu-ray all him transcode video fine, but it keeps telling me "not legal .dts to blu - ray" or "not legal .dts to dvd" in other words, all videos are in line, not the sound.

  Can someone help me please?  Y at - there a step I'm missing?  Why we say that it is not legal, when documentation indicates that still supports dts?

  Here are my computer specs:

  Card mother MSI 7366

  Vista SP2 x 64-4 G RAM

  (2) burners Panasonic MLT - BD SW 5584 Blu - ray

  Thank you

  Halfpint1210

  Halfpint,

  I used SDRS (mainly based on input from Neil Wilkes in those and other threads) without any problem.

  I export the PrPro Audio such as WMA with all six streams included. AMM have been transported to Audition for any additional changes, then exported hearing as six discrete PCM/WAV files. In the SurCode encoder, I encode to one. CPT and Import_As_Asset file in Encore. This file is then placed on the Timeline as an additional Audio track, which is accessible via a Menu. Most of the set-top will players also this additional Audio track via the Audio button, but not all. I also usually add some instructions on this selection Menu Audio, or as a title at the end of a first Clip to play, so the user knows that there are choices.

  Good luck and attention to all of the comments from Neil Wilkes. There are also a few other discussions on DTS, where Jeff Bellune both Neil Wilkes answered specific questions of mine on the subject. Some of them probably come back before even the previous forum. I have found no, and the little that I found (Google), had links to Adobe. I'm sorry.

  Hunt

• Satellite P850 - where to get the Toshiba Blu - ray player?

  Hello

  Recently, I reformatted my p850/049 for windows 7. I tried to install the drive Blu - Ray Toshiba V1.0.3.196A, the file did not work at all and when I tried to install it manually "can't find drive in your system. Installation interrupted. On the download page, it is listed as a patch, but where can I find the original file? I have SP1 Windows 7 pro 64-bit, all date of May 24, 2013

  I found V1.0.5.110 of the American version of the Toshiba support site and this installed and play DVDs and it tries to open a Blu - Ray player, but it gets stuck on a white screen and do not play or let me do anything like scene jump or go to the menu. There is no error message complaining about the region or corrupted files or anything it just goes to a blank screen, with controls that are available, but they do nothing. As I said dvd works perfectly, just not blu - ray.

  The drive itself seems to work normally on this screen and when you try to click the button it comes up with a circle with a line through it when you try to click on the buttons as a dvd drive normal if you tried to jump by the warnings of copyright and the index of time is always a small number that is 25 seconds or more. Like he's trying to play a small segment as the section of the copyright or something.

  I tried a number of different Blu - ray discs, and none of them work. I downloaded a trial of another program of Blu - ray player and it plays Blu - Ray still those who do not work on the Toshiba drive (for the hardware works), so I'm looking for a free one that works without a watermark on the screen. It seems silly as I hoped my machine READING BLU - RAY without me having to buy software.

  Any help would be appreciated

  > I tried to install the drive Blu - Ray Toshiba V1.0.3.196A, the file did not work at all and when I tried to install it manually "can't find drive in your system. Installation interrupted.

  Yes, it is a patch file and you can not install this without a full version installed.

  But I found on the page of the Australian driver Toshiba Toshiba Video Player 5.0.0.16 - A
  Have you tried to install this application?

  On the other hand, I could recommend the use of the freeware such as VLC Player software.
  It's really great and in my opinion the best player you can get for free.

• Blu - ray and the sound of my Dimension 9200 to the HDTV and receiver-best way surround?

  Hi people.
  I have a Quad Core 9200 with exit DVI (7950 high-end graphics card). I think I have a burner or a blu - ray player to play HD content on my HD with 1080 p via HDMI (adapter) on my PC. I have a receiver sound srurround that can accept the audio standard on my PC (front, rear, center and sub).
  What is the best way to address the issue?

  What Blu - ray player?
  Sound card? Do I still need for 5.1?
  What software to read the BLu - ray to my TV "seamless"? I don't want to see the borders of Windows Media Player by watching Blu - Ray movies.

  Thank you
  Tony

  
  

• SlimType BD E DS4E1S not not reading blu - ray

  SlimType BD E DS4E1S not not reading blu - ray

  I had the same problem. Windows showed the drive correctly, but he did not read anything.

  No miracle software worked.

  Solution:

  Open the drive and clean the laser with a soft cloth. Move as gently strong laser unit and back. Put in a CD and turn manually for 30 seconds.

  I do not know which of the two actions helped... but it worked for me! Solved