Satellite Pro 6100: Bluetooth - how to connect the mobile phone

Similar Questions

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye

• I can't connect the mobile phone as GPRS bluetooth modem

  MSI Wind U100 laptop (toshiba bluetooth module is built in)
  MS windows XP Professional SP3
  Toshiba bluetooth stack 6.30.01

  I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

  After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

  I've read about this problem in the user manual, but I am not understand, how to solve a problem.

  PS Sorry for my bad English

  I recommend you take a look at the next document if it has never worked before:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  You can find in the section "how to resources" from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• Satellite Pro 6100: no LED at all, the machine doesn't work anymore

  Hi all
  I have two nb, a 6000 and a 6100. Never had any probs with the 6000, but my 6100 gives me a real hard time:
  The battery has been fully charged, when out of nowhere, it froze... had no chance, but power button money to stop, something cut, two green LEDs (which is normal, right?)
  Down the silver power button to restart, nothing.
  Plugged the AC supply (because the battery is fully charged, see above...): all of THE lights is empty, no lights at all.
  Pressing the new button, NO RESPONSE AT ALL, it totally DEAD!

  What could have caused this? What can I do? any help appreciated, thanks.

  very desperate, lionmouth

  Hello

  It seems that there is a hardware error that couldn t be repaired by a biosupdate or something. You will need to bring your machine to a partner of service approved for repair/hardwarecheckup. One of my friends had a similar problem with its 6100 with exactly the same symptoms and his "mother" was defective. But at this time the machine was still in warranty so I Don t know how´s with your mobile phone.

  See you soon

• Satellite Pro M40x-115: how to get the color seen on TV?

  Hello

  I would like to use my laptop (satellite pro M40x-115) as a DVD player. But when I connect my laptop to my TV, I get only a black and white display. I tried to solve this problem by installing the latest driver for my graphics card but it has not changed at all.

  How can I solve this?

  Greetz El Mariachi

  Hello

  Have you checked the graphics settings? The settings of the TV must be set to PAL (most of Europe).
  In addition, you should check your TV device if it s can receive the S-video signal.

  Check this: http://forum.digital-digest.com/showthread.php?t=2353&page=1&pp=15

  Good bye

• Satellite Pro A120-154 - how to remove the HARD drive password?

  Hello

  I have the following problem: I set a password for the HARD drive in my old Satellite Pro A120-154 years ago, and now I want to remove or change the passowrd since I'll give you this laptop for my nephew. Instead I don't know the password, I am not able to change or remove, not with the password of Toshiba uitility program and not with the BIOS set up.

  Further I can't find any info on this in the user manual. How can I do this?

  Thanks Tino

  Hello

  I found several useful documents from Toshiba on HARD drive password. Please take some time and pick up some info on HARD drive password and how it works.

  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm

• Satellite Pro S500-14Z - how to access the BIOS?

  Hello

  on the Satellite Pro S500-14Z I can´t access the BIOS via F2 and can´t change the bootpriority through F12. By pressing F2 or F12 during startup, the S500 beeps and restarts. When you first start, I had access to the Bios and set the password and active supervisor module TPM. Since I have no access to the BIOS before Windows starts. Is there another key to access bios (I tried ESC, DEL, F1, INS) or how can I change the pw supervisor (I know my real password!) and disable the TPM?

  Thank you
  Karl

  Hi karlS_1,

  Normally you can access the BIOS if you press F2 before Windows starts. It works with an external keyboard?

  You can change some settings in the BIOS using Toshiba HWsetup. This tool is preinstalled on your laptop and you can change the order of boot with this tool.

• Satellite Pro S500-10F: how to disable the fingerprint reader

  We just purchased a portable Satellite Pro S500-10 which has the fingerprint reader. Does anyone know how we can disable this facility of the laptop, we do not remove program only disable the installation.

  Thank you

  You can disable it in Device Manager. If it's not ideal, I guess you could send the laptop to an ASP to have the fingerprint reader physically disconnected.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Satellite Pro P100-438: how to disable the CapsLock NumLock or Scroll sounds

  Hi out there,.

  How can I disable these "ugly" notification sounds when I press CapsLock NumLock or Scroll?

  It's a Satellite Pro P100-438. Does anyone have any suggestions?

  Thank you

  It's pretty easy mate.

  Follow these steps:

  -Keep right SHIFT> key for about 10 seconds.
  A messagebox will appear (FilterKeys settings) and offer a menu:
  -Click the [settings] button and a new window will appear.
  - Remove the tag [x] of [Use ToggleKeys].
  -Click [OK] to save your changes
  You're done :)

• Satellite Pro L300-291 - how to get the work of resolution 1920 x 1080?

  Hello

  Really bad, my old PC and laptop can connect to my external monitor to 1920 by 1080, which is the native resolution of the screen, even made my Xbox 360. But won't my Toshiba Satellite Pro L300-291, it tops out at 1680 by 1050 and will not display anything higher. I tried the latest drivers without success. What is a physical limitation on the laptop?

  Thank you

  Mark

  Hey Buddy,

  I agree with the user above:
  -Check the user manual and
  -Check out the features of your graphics card

  Then you will find information which screen resolutions are supported and not. In addition, don t compare it with other laptops or devices. Not all laptops are the same, there are different hardware, etc.

• Satellite Pro C660-1JL - how to change the language of Windows 7?

  Hello

  I bought Toshiba preinstalled official Windows 7 Professional 64 service Pack 1. And I would like to change the language from German to the Russia.
  In accordance with the instructions of the microsoft home page I could not get the result. MUI Pack does not appear when you are looking for Windows updated (some other updates are available only, but not language pack)...

  What would you recommend how to fix this?
  Its Satellite Pro C660-1JL

  Hey,.

  > I bought Toshiba preinstalled official Windows 7 Professional 64 service Pack 1
  You can change the language on Windows 7 Professional t, this is possible on Windows 7 Enterprise (volume license) and Windows 7 Ultimate edition.

  So if you want another language, buy Windows 7 Ultimate or be happy with the current language of Windows 7 Professional. ;)

• I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

  I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

  Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

  If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

  Have a look here.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

  It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

  If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

  For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

• Satellite Pro M70-220 - how to start the Advanced Boot Menu

  Which key have to press on my Satellite Pro M70 - 220 starting Win XP, in order to enter the "Advanced Start Menu" - in other words, the menu that gives various boot options, such as safe, last good start Congiguration, start Windows Normal Mode, etc. ?

  On my old laptop Satellite 5105 - S702, it was the F8 key, but by pressing the F8 key on my M70 Pro does not bring up the 'Start Advanced Menu".

  The Advanced Start Menu came on its own a few days previously after an abnormal stop, so it seems that it does not exist on the M70 Pro.

  Thanks for any advice anyone has to offer.

  AlanCB

  Hello

  The Advanced Boot Menu can be reached by pressing the F8 key.
  It s a Windows menu basic and it s any laptop it is.
  It should work on all computers.

  Maybe you can not activate the Start Menu advanced because the Windows operating system is confused upward.

• Satellite Pro A100 PSAASE: How to get the FN keys work in Win XP

  Hey,.

  I bought the PSAASE Satellite Pro A100-00H004GR and killed Win Vista. Now it's Windows XP Pro!

  There is no Win XP Modem drivers on the Toshiba Page for this model, but I solved this problem by myself.
  But now my Fn keys/keyboard shortcut does not work and I have no idea what to do. I've tried Hotkey utility of the other models, but it does not work.

  No idea what to do now?

  Full Support of driver for each model would be great...

  Thank you
  Marc

  Hi I found the usefulness of Toshiba Satellite Pro A100 PSAA3 shortcut keys.
  It is not the same series, but try to install it. Maybe it will work!

  Don t forget to also install the common Modules