Sound and music iss after the update of the marshmallow...

Similar Questions

• Internet and the sound does not work after the ATU Vista 64-bit

  I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for.   2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.

  After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.»   You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.»  Everything always looks the same as it was when I put in place.

  Is there anything else I can look?

  Second problem happened at the same time.  I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected.  I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.

  I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way.  I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol

  I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask.  I hope that someone has had this problem and can help me to solve it.  I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone

  Thanks for your help

  After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.

• photos, videos and music available in the phone but...

  photos, videos and music available in the phone but not visible to play music and gallary motorola any idea about that?

  What real happen?

  all the data available in the ES Explorer

  These step I tried yesterday actully I stared

  I just connect to my lappy and update the data up to now I can't all visible music playing music and photo and video gallery

• When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. are you referring to the startup sound?
  3. What is the brand and model of the computer?

  I suggest you try the steps from the following link:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Adobe Premiere is freezing and reading lag after 2015 update on Windows 7

  Adobe Premiere is freezing and reading lag after 2015 update on Windows 7.

  Even if I add a simple title or shorten a clip in a few images, these tiny adjustments can make the software freeze and two windows appear in the preview window.

  He will not be reading sometimes 30 seconds every time I do this minor changes.

  Photoshop is also very slow when loading.

  For the record, I don't use ANY 3rd party plugins.

  Overall the new update seems not at all work very well.

  How can I reinstall the previous version all CC 2014 please?

  I use the software a few hours a day and I can say that previous versions of the products worked well and I never had any real problems in the previous 18 months - the new version is somewhat a mess.

  Yes, with a subscription of the cc, you can install and use the cs6, cc, 2014 and 2015 CC cc.

  to install cc 2014 open your desktop cc app > apps > find additional applications > previous version > first pro install > cc 2014.

• Should I iMatch and music Apple at the same time?

  Is there a point I iMatch and music Apple at the same time?

  These are two different services > iCloud library: understand the differences between music from Apple and iTunes game - Apple Support

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

  I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
  Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

  I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

  Any help will be appreciated. I really need help.
  Thank you.

  Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

  And? :)

• No artist and music information of the Album in the App after update 6 Android on M4Aqua

  Hello community.

  I updated my Xperia M4Aqua a few days earlier of 5 Android to Android 6.

  The update worked fine. But since then, I can't find the information of the artist or the album in-app music. Instead, it shows just an empty space.

  Strangely, the title and the genre of music is displayed correctly.

  During playback of a track, the app run correct title, but also shows "unknown artist" and "unknown album".

  I deleted the cache and data local to the application, but nothing has changed. Then I downloaded the VLC Player on play store. Fortunately he read the files correctly, so that the information is still in the files. Just the music app is not showing them.

  Can anyone help? I really like to use the music app Sony again, because I love her and I am used and the VLC player crashes from time to time.

  Thank you, and in many ways,

  Paul

  Hi uliwooly, I just uploaded the folder music on the PC and on the phone and all of a sudden, all the information of the song are back. Strange error, but worked for me. Just the playlists are empty now :-(

  But the problem is solved for me :-)
  Thank you

• Constant freeze (on IE9 and mozilla and media players) after the updates of windows, please help?

  Hello

  I have a bit of a situation, which I believe can be due to windows updates. I'm not very experienced with computers, but I know that I have no viruses on my computer, or malicious software, and I have corrected all the mistakes of registry. I have a dell xps l702x, i5 2.4 GHz, 8 GB of RAM. I had this problem for over 2 months and I just ran out of options on how to solve this problem. I reinstalled windows 7 all about 3 times over 2 months, and I have an idea about what's going on. My computer's internet browsers, which means of IE9 and mozilla firefox keep freezing when I use them. I tried to use internet explore with no. Add ons, without success, as well. I have a few movies downloaded, to freeze when I try to play them in VLC Player. When I re-installed windows 7, I used my pin code files for install base running programs. After windows updates (which were just of securities system and IE9) I started having the gel. It seems that some program moves data to and from the hard disk are the culprit. If I opened IE9 and it loads the homepage, if I move my mouse it freezes instantly, without ctrl + alt + delete to help me.

  Help, please!

  Do not use the programs OWN more.  They do little good and can cause problems.  What may happen, it is that these programs can find registry entries that do not appear to be used, then remove them.  MS has put some of these here for future use, and when the updates come and try to use entries that has removed the vacuum cleaner, you encounter this kind of problem.

  It is also possible that you may have an overheating or other related materials the problem, but if you have used a cleaner program, I would try to reinstall and do not use it to see what happens.  If that does not resolve the problem, you can check the time with SpeedFan, run the memory diagnostics, run drive Diagnostics, run chkdsk, etc., but reinstall without the program cleaning everything first.

  Also, you need only to download drivers from Dell, not Intel or update MS or anyone else.  This is another way people get into trouble.

  Good luck.

• Why is it hard drive see the photos, films and music even after I deleted all

  Hello

  I recently deleted all my photos, movies and music on my Mac to save on hard drive.

  However, despite the removal of all my hard drive is showing:

  3.2 GB movies

  1.3 GB Audio

  Photos of 4.3 GB

  I searched these files and the results come back with nothing but my hard drive is still showing that this space is taken to the top.

  Does anyone have any ideas or ideas?

  Thank you

  Andrew

  Hard drive space and 'other ':

  https://support.Apple.com/en-GB/HT202867

  Also, try to rebuild the Spotlight index: https://support.apple.com/en-us/HT201716

• Satellite A200 - 1 M 7: the sound does not work after the downgrade to XP

  Hello!

  As in the topic I have a problem with my sound card - it simply does not work under Win Xp (under Vista everything worked).

  In Device Manager I have two 'points of inquiry:
  -Controller\ PCI memory
  -Unknown device
  I assumed that the unknown device is my sound card, but still can't make it work :/

  I've already upgraded the bios and install page of toshiba Realtek drivers.

  Really need help.

  Adrian

  Hello

  No sound after installing XP operating system. What to say man I searched here in the forum similar threads and it seems that it is a common problem.

  But you worry about don t; I think that I found the key ;)
  After installing win XP, you must update the latter State. Install all the patches and hotfixes provided by Microsoft. You must use the website to update Ms. The tool on this page checks the system and selects all necessary updates!

  Very important are the patches; KB888111 and KB835221
  These hotfixes must be installed before installing the sound card driver.

  The Realtek sound card driver can be downloaded from Toshiba or on the official website of Relatek page.

  By the way; It is very important to install drivers in the correct order. On the Toshiba page, you will find the installation instructions. So please follow the guidelines mentioned in this doc.

  concerning

• A60-302 Sound and Modem problems after wake up

  I use a laptop A60-302 with Greek WinXP.
  My problem is that after always and sometimes even sleep
  After the start, the sound card is dead and I have to restart to hear something. The same thing happens with the Toshiba Modem.I did the last update for the sound card drivers, but it does not help! What can I do to alleviate this problem?

  Hello

  You can try to update the Toshiba Power Saver or power management because they are responsible for the day before!

  I got an A50 and use put to sleep / hibernation every time without problems!

  When he runs in the past, you can also try to use the Windows XP system restore! It redefines the laptop to set restore points!

  Rudi

• Equium P300-16 t BSOD and black screen after the removal of GPU

  I have a Toshiba Equium P300-16 t and I was getting 90 c - 95B on realtemp so I bought a thermal paste of isopropol alcohol and yesterday that I changed the thermal past on the CPU and the GPU.

  When I booted up after that there was a long beep that lasted a few seconds and my speakers a few cracking apart from that everything was normal, but then after a few minutes my screen is odd (for example, green artifacts) and then went black.

  After awhile, I started my laptop to the top and the same thing happened with the speakers and a beep but the screen was fine. I opened realtemp and became c 65 - 70 c, then restarted because of an Avast update.

  Now, when I turn on my laptop the screen becomes either black or I get a BSOD 0x0F4. I tried to boot from a USB Win7 and repair, but the rest screen went black, so it is not a HARD drive problem as some sites say (from the BSOD error).

  BSOD is mainly a product of serious software problems or it seems due to a malfunction of the equipment.
  I guess this is NOT question related software since you don't touch software (am I right?). So I think you damaged somewhere during the disassembly of the laptop or the removal of CPU and GPU.

  I have no other way for you to control the affected parties? How?
  I guess you need a help from a technician who would be able to analyze the material for potential problems.