sound is no longer spell headphones but will be fate of the speakers on a m6-1035dx.

Similar Questions

• Icons wiggle and move in the home screen but will not go to the next page

  Icons wiggle and move in the home screen but will not go to the next page

  You need to move to the edge and hold the button for a few seconds so he can move to another screen.

• My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program

  My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program. How can I fix it so the SLL laucher works.

  Sorry, it's a product of the gainful. I can't test it. Go to http://support.vocalocity.com/ for support.

• When I play something with the sound, static is not bad, but static is always in the speakers.

  When I play something with the sound, static is not bad, but static is always in the speakers. I thought speakers was a new problem, obtained today, has no help.tried for the driver online, but do not think that I got the right one, recently had to reload vista, need help

  original title: get the constant static

  Hi MikeMorrow422,

  ·         Did you do changes on the computer before the show?

  ·         It was working fine?

  Follow these methods.

  Method 1: Perform a System Restore and check if the problem persists.

  Method 2: Follow the steps in the article.

  Tips for solving common audio problems

  For reference:

  No sound in Windows

• When I use the head phones the continuous sound to fate of the speakers

  When I plug my headphones in my cell phone I can hear the sound of my headphones, but the continuous sound to fate of the speakers

  How can I stop this

  Thank you

  Can you please tell us what model of laptop do you have?
  Some sound Manager is preinstalled on your laptop? You can find it in the control panel. Is there something like Realtek sound Manager?

• computer is spit back out dvd but will keep and play the game disc

  have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help

  Hello

  Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
  on the problems known.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  ----------------

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Documents Word 2007 open but will not appear on the monitor.

  When I try to open existing Word 2007 documents or start a new Word opens but won't that appear in the lower shelf. When I click the icon in the lower plateau, on what reached the document quickly slides off the screen to the right--and out of sight. I'm traveling to the Brazil and have been able to use BrOffice.org to access to and use, my documents. I have Windows 7 Ultimate, but did not bring my Office 2007 disk with me. I scanned for viruses and spyware, and there is not.

  Thank you

  Perfectionseeker

  Please repost your question in Forum Word to: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads where experts in Word will be happy to assiist you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• loaded call of duty 2, but will not be executed, the library not registered

  I was able to actually load the game (I can see it in programs), but when I try to execute a notice appears saying there are compatibility problems. (I ran the program under xp3 compatibility, vista2 etc..) I touched the program anyway and "library not registered" comes back every time.  Very frustrating.

  This solves a problem I've been working on for months.  I have never messed with 10 windows experience - has been a long pain without any benefit.  It DOES nothing again - except mess up COD 2.

  Thanks again.  Uninstall KB3086255, run as COD 2 Windows 7 admin and you're ready to go.

• Once I refreshed, when I go to pull down to a previous visit, it loads the address bar, but will not go on the site.

  Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It is used to automatically load, now it won't load at all! I am running Windows XP

  You are running Firefox in compatibility mode for Windows 98 (NT 4.10) according to the user agent.

  • Mozilla/5.0 (Windows NT 4.10; rv:36.0) Gecko/20100101 Firefox/36.0

  Make sure that you are not Firefox running in compatibility mode.
  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• T500 with Windows 7 going on but will not go past the opening of Thinkpad screen

  Hello

  This morning I turned on my lenovo to discover, that there will not be progress after the lenovo screen. I tried to drain the battery already too.

  Help someone!

  Fix of a problem

• Scan the network works on computer windows laptop, but will not scan on the new iMAC!

  Hi all, I just moved to iMAC pc and set up my HP Photosmart C7280 all-in-one on the mac. Everything is printing ok, but when I try to scan I get a message error and of course no sweeping. The photosmart is on a home network and still works fine on my computer windows vista laptop. Any Advisor

  Great, thanks for the comments!

• the song plays on laptop, loaded on the player, but will not play on the device

  There are about 80 of the 480 sogns I have synced my clip that will not play either.  they play fine on my laptop and win 11 med says that they are on the device.  what the hell's going on and can you tell my why Back in Black will not play while Thunderstruck (from the same cd I own) has no problem?

  Try Reripping the files in MP3 format.

• Windows activation - new hard drive and reinstalled Windows, but will not work with the product key

  Hi all

  My hard drive died so I put a new in and installed Windows on a drive, but when I have just activated and put my product key does not work. In fact, I get this day by putting in and then it says character not aloud.

  Please can someone help? All I've done is put a new hard drive in but guess that Windows detects that the product key has been used on the old, which explains why it won't work on the new. What should I do to activate the key?

  Thank you

  Richard

  Thanks a lot for your useful replies. I've got in contact with Microsoft and they gave me a key and it worked!

  Thank you

  Richard

• How to remove defender windows on the new computer with windows 7... can see, but will not happened to the top in the list of programs under Uninstall

  I installed windows defender when I got the new computer with win 7 preinstalled for protection up to what I could find the # key to the program I bought for another computer.  tried to remove defender windows until I downloaded the paid program but could not find it to uninstall... see windows defender is on the computer, but it doesn't show in the list in my computer/control panel uninstall so I'm not able to uninstall... Please help... so far I do not know I like windows 7 at all... give back me my simple xp.  :-)

  If windows Defender is not supported by microsoft that they deliver of course assign updates for her and also their malicious software removal tool.

  You can disable the safety recalls.

• Reduce the size/resolution of the image but will then return to the former size when click ok

  Hello

  Hope this finds you well.

  I'm trying to reduce the size of an image to get the height according to a specific size (360 px) because it's the height of the container it will sit on the web.

  I learned to:

  -go to image/image size

  -Be sure to re - sample image is disabled

  -change the units of the size of the document to points

  -Enter the new height

  -then check out re - sample image

  -Enter the final resolution to 72 (it was 183 front)

  -Uncheck resample image and click ok

  I followed these instructions and except for once (which I can't do redo) the image will return to its original size after the last step to uncheck image re-snack.

  No idea as to what could happen and how can I solve it?

  I appreciate your time and look forward to hearing back from you soon.

  Thank you!

  You don't need to keep check / uncheck resample image.

  Leave resample image checked and enter the size in pixels in the pixel Dimensions section. Enter the resolution box - which should be 72.