Sound not working after upgrading to windows 7

A few days ago I updated my gf pc from windows xp to windows 7. The problem is that the sound does not work. I searched the internet and I tried different ways to deal with this problem, but nothing has worked so far. Which, in my view, could be the problem, it is that the computer does not recognize the speakers. Here is a screenshot of how resemble the sound playback devices. Windows sound is in Romanian, but it won't be a problem for me to follow all the steps you mentioned. If anyone can help me, I'll be with more recognition.

Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

Resources:

If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

Open the troubleshooting of Audio playback

http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

In Windows 7

Click Start > Control Panel

Click on hardware and sound

Under sound, click on manage audio devices

Under playback (tab)

Choose speakers you have in your output device

Click Properties >

Click levels (tab)

check if the value is 100% >

GoTo Enhancments > select Loudness balancing

Apply and OK

Should be much stronger now...

For enhancment bit,.

and if you have HD realtek soundmanager (R2.37) in your control panel

Try a classic Equalizer setting

Tags: Windows

Similar Questions

  • Apple Software Update will NOT work after upgrading to Windows 7

    Apple Software Update will NOT work after upgrading to Windows 7

    flyboy340 wrote:

    Apple Software Update will NOT work after upgrading to Windows 7

    More information is needed.

    Which machine you use, OS X are you running?

    Windows 7 running in BootCamp?

    The OS X app store is not present at all?

    AppStore is present but the update tab does not?

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

    Hello

    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards

    Joe

    SOLVED!


    I uninstalled VMware Player, including the abolition of the configuration files.


    re-installed VMware Player and it worked!

  • Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

    Hey!

    I can't get my card reader works after upgrade to windows 10 64-bit...

    Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

    "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

    Have you ever tried the Realtek website?

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

    Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

  • Portege M800 - Microphone does not work after upgrade to Windows 7

    Hello world

    I have a Portege PPM81E and am unable to get the microphone not working after having upgraded to Windows 7.

    I tried all the drivers I could find, but no luck.

    Is there anyone out there with the solution?

    Thanks in advance!

    Just a few questions:
    You have upgraded original Hat version of Vista you have with your laptop or you have installed the clean version of Win7?
    All hardware components are correctly installed and listed in Device Manager?
    How do you test feature mic?
    Microphone is in the sound properties > recording devices?
    MIC is set as default device?

  • Trackpad and keyboard does not work after upgrade to Windows 10

    Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

    1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

    2. you can also run the following procedures to restore the OS default.

    3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

    4. Please see also Boot Camp: the operating system default value .

  • Pavilion dv6 sd card reader does not work after upgrade to windows 8

    Hello

    My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop).  I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?

    Hi SanSam.

    Thank you.

    Install the driver from Realtek for Windows 8 card reader.

    Please post your results.

    Best regards
    ERICO

  • Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

    Hi all

    Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

    His output HDMI for my Sony LED used previously to work properly.

    But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

    I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

    Thank you.

    I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

    To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

  • G550 headset does not work after upgrade to windows 10

    After the upgrade to Windows 10, there as no sound from the speakers, I finally saw that the headphones were chosen as a default feature, so I changed the speakers... but now I only get not all the sound through the headphone jack, unless I put them to the audio device by default...

    There seems to be no audio driver for the g550 for windows 10... currently its using the windows high definition Audio Device driver v 10.0

    Is there a solution...

    Fixed it myself... installed the audio driver for Vista 32 bit for the G550 and now back to work both speakers and headphones. the pilot is Conexant High Definition Audio Smart 221

  • Satellite L750 - WLAN does not work after upgrade to Windows 10

    After the upgrade from Windows 7 to Windows 10, internet Wifi don't work do not. Unrecognized WiFi. Seems that the driver for the wifi does not work with windows 10. Any ideas please?

    Dear Jolgas,

    It seems that the problem of driver. You should installed driver WiFi for window 10.

    Thank you
    Solène

  • The touchpad scrolling does not work after upgrade to Windows 10

    Hello world

    I used everything on my laptop Satellite uninstalled and reinstalled Windows 10.

    Now, toshiba applications disappeared.
    This isn't my problem.

    My problem is that on my touchpad scrolling is not working.
    Synaptics is gone and when I try to install a new driver (Touch Pad driver) it gives an error after installation.

    Synaptics is installed accept for the uttilities mouch.

    Someone can help me.

    Greetings, Jiska

    I don't know what model of laptop you have, but it turns out that not all series of phones are supported to win 10 upgrade.
    In this case Win 10 drivers will not be released on such unit...

    The touchpad scrolling requires additional touchpad driver...
    If your device supports Synaptics touchpad, you can also use the driver for the Synaptics driver page:
    http://www.Synaptics.com/en/drivers.php

    But currently driver to Win 10 is not available... you can try to install and to use the Win 8.1 driver but I'm not sure if it will work properly...

  • Pavilion dv7: Wireless does not work after upgrade to Windows 10

    After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

    This feature worked perfectly in Windows 7

    No worries.

    Thanks for the actual name of the product from your laptop.

    Let me take a look.

    I will edit this thread to let you know what I found.

    The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

    https://communities.Intel.com/thread/59710?start=0 & tstart = 0

    You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

    I saw them on eBay for @ $20.00 USD

    http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681

  • P5T15EA #ABU: (off mic and dim) function keys do not work after upgrade to Windows 10

    Hello

    After the upgrade to Windows 10, as dim and mic power function keys have stopped working. I installed all the drivers, and there is no unknown device in System Manager.

    How can I solve this problem?

    Model:

    HP ProBook 440 G3

    P5T15EA #ABU

    Hello Horiz0n,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I understand that the function keys do not properly function on your laptop.

    Please use the link below to install the driver hotkey support to solve the problem.

    FTP://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73347.exe

    If you need to know more information refer to this Document ID: c04898039.

    Hope that answers your query.

    If you have any questions please reply back to me.

    Have a great day!

Maybe you are looking for