Sound recording play hum and then no audio

Recently, my computer had a problem where it sometimes, for no reason that I can understand, will emit a noise for a second or two and then all the sound elements will be gone. In Device Manager, it will say that the sound card works fine. It is not a question of volume: if I turn up to 100 in the mixer, there's still nothing. If I run the troubleshooter, it will say that there is no problem. If I try if the sound recorder, it is said that a device is not found. Also, if I try to play music in Foobar, he responds with "error unrecoverable read: unknown error code (0 x 88890010). I can restart the computer and everything will be fine, but it happened with a frequency of more recent times. It is very annoying because it is quite unpredictable when it will happen.

Hi Aaron,

1. What problem did you run?
2. don't you make changes to the computer before the show?

I suggest you try the steps from the following link:

Tips for solving common audio problems (by my speakers is crackling or distorted).
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

Post us the results once you try the steps above.

Tags: Windows

Similar Questions

  • When I play itunes and then play youtube... my sound goes all funny and fuzzy and slow down the movements of the computer? Any ideas?

    When I play itunes and then run youtube... my computer starts to gltch and slow down. Ditto for when I play a game it glitches and slows down every 30 seconds and gets really fuzzy... does anyone know the cause of this?

    Hi Judsonp14,

    (1) since when are you facing this problem?

    (2) remember to make changes?

    Method 1: You can follow the steps mentioned in the link below

    What can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slowly?

    Method 2: Let flow the fixit available in the link below and then check

    Playing video files crashes or blocking Internet Explorer or Windows

    http://support.Microsoft.com/mats/video_freezes_or_crashes/en-us

    Method 3: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

  • Sound Recorder, Volume Control, and Word Pad is gone and is not found in entertainment accessories, etc.

    Original title: My Sound Recorder, Volume Contol and Word Pad is missing and cannot be found in entertainment accessories, etc. on my Windows XP computer. I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd.

    I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd using cmd or %systemroot%\system32\sndrec32.ex_%systemroot%\system32\sndrec.exe ideas would be appreciated.

    Hi nsuzann,

    1 have you made changes to your computer recently?

    2. are you all error codes or error messages?

    You can try the following steps and check if you can access Sound Recorder and WordPad.

    Method 1:

    a. go to C:\Windows\System32 and double-click sndrec32.exe and check

    If she opens the tape recorder, and then create a shortcut on the desktop

    b. right-click on sndrec32.exe and select send to desktop.

    Method 2:

    About lack of WordPad, try the following steps:

    Step 1:

    Try to launch WordPad into the run window and check.

    a. Click Start and select run

    b. type WordPad, and then click Ok

    Step 2:

    a. navigate to the following location:

    C:\Program Files\Windows NT\Accessoires

    b. right-click on wordpad.exe and create a shortcut on the desktop

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

    Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

    Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

    ====================================
    After making your change did you left click... Apply / OK?
    John Inzer - MS - MVP - digital media experience

  • Sound recording play error message: disconnected from the audio jack and opens the Realtek HD audio Manager.

    Original title: his record game

    Recently, I built a new computer and its been connected via HDMI. Then one day that sounds simply stopped working, so I've updated my drivers that are digitally signed and still no idea. It is said that I unplugged the audio jack, and it evokes the strange Realtek HD audio Manager every time.

    The operating system is Windows 7 64 bit home edition. Does anyone know what I need to do to correct this little hiccup?

    Thanks for the help,

    Mac ~.

    IS TT 3TT)<>

    Hey Mac,

    You can try the following steps and check what is happening.

    Method 1:

    You can try to disconnect and reconnect the connection and check.

    Method 2:

    You can also try uninstalling and reinstalling the latest version of the sound card driver.

    Step 1:

    Uninstall the audio drivers from programs and features

    a. click on start

    b. type appwiz.cpl in the start search

    c. search for all packages to audio driver, right click and uninstall.

    Step 2:

    Uninstall the drivers from Device Manager.

    a. click on start

    b. type devmgmt.msc in search, and then press enter

    c. in find Manager device for the device, right-click on it and select the option uninstall

    d. restart the computer and check.

    You can also consult the manufacturer of the computer or the device manufacturer's Web site and install the latest version of the audio drivers.

    Updated a hardware driver that is not working properly

    Hope this information is useful.

  • Sound recording play no audio at all and no audio devices

    I was playing League of Legends, when my laptop (Alienware Mx14 I think) crashed I turned off turned it back on the no sound at all in the bottom right corner there is an icon of the sound with a red x when I click it it trouble shoots so cannot identify the problem, I went into my control panel and clicked on manage audio devices but there is NO I don't know not why and then I realized that I can't use my microphone or I have it plugged in headphones which did not help please help me solve this problem

    Hello

    Audio driver crashed. Update only and it should work. You can find the sound card driver in support.dell.com for driver downloads. Just follow the instructions on the dell Web site.
    If you want to let your computer drivers update by itself which is wiser to do everything manually, you can use RadarSync. Since you are a gamer, keeping all of the updated drivers you would have a better experience with your computer. To operate to its full potential by keeping all of the updated drivers.
    David
  • How do nested Movie Clip play once and then stop?

    Hi all

    I was looking for a simple solution to this issue for more than a year. I saw a few solutions

    that work, and lots of questions that remain unanswered questions.  So I thought that I get it from the pros.

    I have a nested clip (image sequence) I use the snippet of Flash CS5 GoToAndPlay.  The Clip

    loops continuously.  How to play once and stop.  I tried the snippet for the stop, I tried

    Stop(); in my layer "Actions".  I tried a stop(); in the last picture of my sequence nested.  I tried a stop to the

    end of the function, but nothing stops this 'thing'. He keeps going and going and going.  This is my typical of the code which

    loops...

    Stop();

    btn3.addEventListener (MouseEvent.CLICK, cd_ClickToGoToAndPlayFromFrame);

    function cd_ClickToGoToAndPlayFromFrame(event:MouseEvent):void

    {

    gotoAndPlay (1);

    }

    btn4.addEventListener (MouseEvent.CLICK, ef_ClickToGoToAndPlayFromFrame);

    function ef_ClickToGoToAndPlayFromFrame(event:MouseEvent):void

    {

    gotoAndPlay (10);

    }

    There are basically two (2) buttons on the page, and the back and the button forward and the sequence of images is nested in a

    video clip, in this case, to frame (1) and another nested video clip to frame (10).  How can I play once and stop

    on the last frame of the clip nested?

    Thank you

    Duane

    You are welcome.

    If my answer has worked for

    you, please indicate your question as answered.

  • Satellite Pro U200 sound loss every now and then we don't know

    While I listen to my MP3s suddenly sound turns off
    I checked if the sound is muted, is NOT
    I checked if the volume is low, it is NOT

    The only way I can get my sound back is to restart the laptop (NO log off and on again).
    There is no distinctive model for how often this happens. Sometimes this will happen 7 times a day and sometimes I continue to use it for a week or even 10 days then it will start to reproduce.

    After the sound turns off sometimes I can hear some cracks and scratches if my media player works always read MP3, but it would be a second or so and once again this cracking is not continuous and is not a particular model.
    I asked my business HelpDesk for updating the Audio driver twice and but still this problem occurs.

    concerning
    Wiz

    Have you tried to reinstall the whole OS from the recovery CD?
    Eventually it s only a software problem. You know something wrong with the file system or registry entries.

    I had a sound problem on my laptop after reading 3rd party software installation. The question was very strange. If I played the audio files from the HARD drive, the sound was not clear. After the new installation of the OS, I was able to play the music properly.

    Try this. Maybe it helps.

  • Satellite L650 - crackling sound while playing games and videos

    I have a Toshiba Satellite L650 and have problems with the sound... when I play, games or videos he makes a noise cracky and sort of trolling... it happens as well with slower and faster games and videos in all quality´s. I think that the problem started after the update drivers I did the site toshibas, with the right model and stuff...

    Can anyone help?

    Then I have another question! When you play games like civilization iv or nfs carbon (which are not so high end) after 1 hour reading of the temperature of my cpu is almost 70 Celcius... and when he's in the game call of duty 4 its same 80 c so I stopped to play... I know that this problem is regulair with toshiba , but even while surfing around its 55 ° c... should I accept this, or is there something to do? (this is a new Toshiba L650 psk1JE)

    0101 - operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7600) (7600.win7_gdr.120305 - 1504)
    0102 - language: Swedish (locale: Swedish)
    0103 BIOS: InsydeH2O Version 2.40
    0104 - processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
    0105 memory: 4096 MB RAM
    0106 available OS memory: 3958 MB of RAM
    0107 - Page file: 2612 MB used, 5301 MB of available space
    0108 Windows Dir: C:\Windows
    0109 DirectX Version: DirectX 11
    0110 - DX setup parameters: not found
    0111 - DPI setting: using System DPI
    0112 - system DPI setting: 96 DPI (100%)
    0113 - DWM DPI Scaling: disabled
    0114 DxDiag Version: 6.01.7600.16385

    ----------------------------------
    02 - processor
    ----------------------------------

    0201 legend: Intel (r) Core i5 CPU M 460 @ 2.53 GHz x 4 ~ 2534 MHz
    0202 CurrentClockSpeed: 1190 MHz
    0203 L3 Cache: 3,00 MB
    0204 L1 Cache: 32,00 KB
    0205 L2 Cache: 256,00 KB

    ----------------------------------
    03. video adapter
    ----------------------------------

    0301 - card Name: ATI Mobility Radeon HD 5650
    0302 manufacturer: ATI Technologies Inc.
    0303 - Type chip: ATI (0x68C1) graphics card
    0304 DAC Type: internal DAC (400 MHz)
    0305 key: Enum\PCI\VEN_1002 & DEV_68C1 & SUBSYS_FD121179 & REV_00
    0306 - display memory: 2737 MB
    0307 AdapterRAM: 1.00 GB

    > I think that the problem started after the update drivers I did the site toshibas, with the right model and stuff...
    Can you please tell us what drivers have updated you and why? What was wrong with the old drivers?

    When you start your next portable speakers test time using preinstalled Toshiba diagnostic tool and post the result here.

    What about the temperature of the laptop. 80 c is high temperature but still not critical, and if your mobile phone is placed correctly on the desktop and the cooling fans are not blocked I think you can continue to play the games.
    Before the games close all unnecessary applications and uses laptop computer on power plan to high performance.

  • No sound while playing games and how to carry out the AV rear?

    Original title: cannot turn off surround, just 2.1 speakers.

    I only have some 2.1 speakers, but in all my games (World of Warcraft, Call of Duty, etc.) I can't hear any sound coming from the rear because there is no way to disable surround. I went through all the options in my playback devices, but found nothing. What can I do?

    Hello

    1. did you of recent changes to the system before the show?

    2. is it works much earlier?

    3 is the issue limited while playing games?

    4. What if the sound works fine in your system?

    5. don't you want to disable the sound design?

    Method 1: audio playback convenience store open

    Follow the link below and follow the steps mentioned in the link and check if it helps.

    http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter.

    Solve the problems associated with the sound of the games Microsoft or mapping programs

    http://support.Microsoft.com/kb/812394 (applies to Microsoft Games).

    Method 2: Correct sound problems.

    Follow the steps mentioned in the link given below and check if this solves the problem.

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    Method 3:

    Follow the link below and check if you can disable the sound surround.

    http://Windows.Microsoft.com/en-us/Windows-Vista/get-high-definition-sound-and-music-from-your-computer

    In addition, check out the link below and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    It will be useful.

  • Sound sound record play will not activate the sound

    the icon of audio on the screen and on my computer are cut and every time I press on it is not turn the sound back on. What should I do?

    Hello

    I see that you are unable to reactivate sound.

    Do not worry! I'm here to help.

    You did changes to the computer before the show?

    Let's try the following and check if it works:

    Method 1:

    You can run the troubleshooter Audio playing & check if this solves problems.

    Open the troubleshooting of Audio playback

    Method 2:

    You can try to download & install the latest drivers for sound card on the manufacturing site & check if the problem persists.

    Reference: update a hardware driver that is not working properly

    Hope the helps of information. Please post back and we do know.

    If you need assistance regarding Windows please keep us informed.

  • Sound recording play, sound safe mode does not!

    Well, I have a Lenovo T61 and it began to show the blue screen. It won't let me boot up normally, but when I go into safe mode the Audio does not work. Is there a way I can fix this?

    Hi MoniqueHinds,
     
     
    1. What is the operating system installed on the computer?
    2. What is the exact error message you get with error blue screen of death?
    3. did you make any changes before the blue screen of death error?
    4. are you able to start your computer in normal condition?
     
     
    Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Sound does not work in safe mode as the audio driver is not loaded. To learn more about safe mode and the drivers loaded in safe mode you can follow the links below.
     
     
     
    I suggest you re-read returns with more details on the Blue Screen of Death error, so that we can help you solve the problem with the blue screen of death error.
     
     
    If you use Windows 7 as the operating system, I suggest you follow the steps to fix the problem with the blue screen of death error.
  • Sound recording w/FMS and AIR

    I'm trying to record audio (using a microphone) to FMS 2. My code works fine when targeted for a browser. However, when targeted for beta AIR 3 - the microphone never dectects all activity. Camera works well in both, but not micro. Is this a bug? or I have to do something special for microphone and AIR?

    The AIR team informed me that this is a problem in Beta 3 and it should be fixed in 1.0

  • Where is the sound recorder small application and notes on Z2?

    any of you have an idea where it is?

    I've got my xperia Z this apps but on Z2, I do not find

    @dm841

    Can u download the apks of notes and the second recorder?
    I don't have them either.

    .402 TW version

    Update: ok, found the note, here u go guys

    http://docs.Google.com/file/d/0B2ONZFOkl3m7bUh0RVF5MjBETDQ/edit

    Install it as a regular application.

  • I have made a comeback to my xbox 360 game and tried to play live and then I started saying I broke the rules and regulations HOW CAN I GET BACK ON?

    I PAID FREAKIN $50 TO GET ON XBOX LIVE, AND NOW I GET A KICK? !

    Hello jakebetternotbinuse, terms of service change Xbox 360 Xbox Live status are not allowed on Xbox Live, but for many reasons.

    You will need to connect using an UN-modified Xbox 360 instead. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

Maybe you are looking for

  • How can I change the home page on a Windows 7 computer?

    I have a newish computer and managed to change the home page once, but have not been able to find the solution in the last two days. Current responses to question relate to XP and do not work for Windows 7. could you please tell?Thank youStephanie

  • Can I use my iTunes gift card to buy a photo book custom from Aperture or Photos?

    Can I use my iTunes gift card to buy a photo book custom from Aperture or Photos?

  • product activation

    Have just replaced the hard drive in an Acer Aspire one net book, re-installed windows xp by using the original product key. But the activation wizard does not provide an ID of instalation.  Of course, without it I can not activate. Any ideas?

  • 57 of the code any help?

    can't seem to get this to work?  service pack 1.  a trying to get service pack 2, but must download sp1 I try but receive, code error 57,. Wat ever which is .i cant figger out. ????????

  • Write a file

    Hi all I want to create and write to a file in my application This is my code public boolean writeFile(String content) { boolean isWrite=false; try { DataOutputStream os = null; FileConnection file = null; file = (FileConnection) Connector.open("file