Sound recording play error message: disconnected from the audio jack and opens the Realtek HD audio Manager.

Original title: his record game

Recently, I built a new computer and its been connected via HDMI. Then one day that sounds simply stopped working, so I've updated my drivers that are digitally signed and still no idea. It is said that I unplugged the audio jack, and it evokes the strange Realtek HD audio Manager every time.

The operating system is Windows 7 64 bit home edition. Does anyone know what I need to do to correct this little hiccup?

Thanks for the help,

Mac ~.

IS TT 3TT)<>

Advertisement

Hey Mac,

You can try the following steps and check what is happening.

Method 1:

You can try to disconnect and reconnect the connection and check.

Method 2:

You can also try uninstalling and reinstalling the latest version of the sound card driver.

Step 1:

Uninstall the audio drivers from programs and features

a. click on start

b. type appwiz.cpl in the start search

c. search for all packages to audio driver, right click and uninstall.

Step 2:

Uninstall the drivers from Device Manager.

a. click on start

b. type devmgmt.msc in search, and then press enter

c. in find Manager device for the device, right-click on it and select the option uninstall

d. restart the computer and check.

You can also consult the manufacturer of the computer or the device manufacturer's Web site and install the latest version of the audio drivers.

Updated a hardware driver that is not working properly

Hope this information is useful.

Tags: Windows

Similar Questions

  • Satellite L850 - error message after installing the Realtek Audio driver

    Hi guys.
    I have a Toshiba Satelite L850 PSKG8A-07E001.

    I've upgraded to 8.1 Windows 64 bit

    Toshiba Service Station software advised to update my sound driver 6.0.1.6794 to 6.0.1.7023.

    It says to uninstall the driver installed before you install the new driver.

    I uninstalled 6.0.1.6794. Then I installed 6.0.1.7023 and received the following error.

    * Error code:-5009: 0x8002802b *.
    * Error information: *.
    * > Ctor\ObjectWrapper.cpp (163) *.
    * > Ctor\ObjectWrapper.cpp (402) *.
    * > Kernel\Component.cpp (1163) *.
    * > Kernel\CABFile.cpp (389) *.
    * > SetupDLL\SetupDLL.cpp (1541) *.
    * pAPP: Realtek High definition Audio driver *.
    * PVENDOR:Realtek Semiconductor Corp.*
    * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
    * $11.50.0.42618 *.
    1408.1410* BT_OTHER *@Windows (9200)

    Then I tried to install the old one back and received the following error.

    * Error code:-5009: 0x8002802b *.
    * Error information: *.
    * > Ctor\ObjectWrapper.cpp (163) *.
    * > Ctor\ObjectWrapper.cpp (402) *.
    * > Kernel\Component.cpp (1163) *.
    * > Kernel\CABFile.cpp (389) *.
    * > SetupDLL\SetupDLL.cpp (1541) *.
    * pAPP: Realtek High definition Audio driver *.
    * PVENDOR:Realtek Semiconductor Corp.*
    * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
    * $11.50.0.42618 *.
    1380.1382* BT_OTHER *@Windows (9200)

    Now the original driver was designed for Windows 8. I am now running Windows 8.1.
    The new driver does not work. What should I do?

    I have loged on Toshiba's web page for this laptop downloads. The 6.0.1.7023 driver does not exist.
    Where to find gas station?

    ZEFS.

    > Where to find gas station?
    Good question. My question is: why change something if not necessary?
    In any case, have you tried to remove this driver and install an old?

  • Windows Media Player 12 will not play mp4, mp3, wmv files through IIS hosted local site when the PC is disconnected from the Internet

    I have an IIS Web site 6.1 on local 32-bit Windows 7 machine that serves HTML and MP4 videos via Internet Explorer on the local computer.  An internet connection is not necessary because it is all local storage and local accommodations through IIS.  IIS is configured to serve the MP4 videos in the form of downloadable files, don't not streaming somehow.  I have the right MIME type ".mp4" with the installation of "video/mp4" in the IIS server, so I don't think that's the problem.

    When the machine is connected to the internet, by clicking on a video link MP4 in any HTML page served by the local IIS server results in Windows Media Player opening and playing the video in its own window.  However, when the Ethernet cable is unplugged, by clicking on the same results of video link MP4 in Windows Media Player by opening its own window, and then display this error message:

    Windows Media Player cannot play the file.  If the file is on the Internet, connect to the Internet.  If the file is on a removable storage card, insert the storage card.

    It's almost as if Windows Media Player has a bug and since it accesses this media file via a URL, but the machine is not connected to a network, he thinks that this file is unplayable.

    When the Ethernet cable is disconnected, the local IIS server is still all the HTML code and ActiveX content except for media files.  I also tried to access MP3 and WMV files via the IIS server to see if Windows Media Player will open those when the computer is disconnected from the Internet.  These caused also Windows Media Player files display the same error message.

    I tried the VLC (VideoLAN) Player after changing the property file in VLC of WMP for .mp4 files extension.  With VLC installed and the extension changed to VLS property, I can download/open the MP4 video using the link in the web page served by IIS all when they are disconnected from the internet.  The only thing I can't do is get VLC player to open and play the video simply by clicking on the link in Internet Explore web pages served by the local IIS server.

    I would like to make use of Internet Explorer and Windows Media Player with this IIS server that serves the MP4 videos rather than using VLC player.

    Thank you

    Michael Rayman

    I finally found the answer to my problem:

    When they are disconnected from the internet, mysteriously, Windows Media Player 12 requires that you check a checkbox in tools > Options... > zone settings tab player called "Internet connection (ignore the other commands).  Once this box is checked and the settings saved on APPLY, then Windows Media Player 12 will play videos served by the local IIS server on the same machine, while disconnected from the Internet.

  • I noticed from lately, when I change my settings on the 2 online games, I play, I can disconnect turn it back on and notice the changes eventually reversed to where it was before.

    original title: Vista settings will not save. Why?

    I have a problem. When you use this computer (and this computer has Windows Vista), I noticed from lately, when I change my settings on the 2 online games, I play, I can disconnect turn it back on and notice the changes eventually reversed to where it was before.

    It's getting boring because it is not happened in the past and when I noticed it happened for the 2nd game after seeing this constantly on my 1st game, it came to me that it is not the games that does this: it is the computer itself.

    What should I do so that the computer can actually record setting changes I made?

    Hey, Andrew,.

    Most likely a configuration of settings on your computer file is damaged. You can take a look at this article that Blizzard has published:
    You can also ask your question on the forums of World of Warcraft:
  • How can I disable the sound when an error message appears?

    There is an anoying sound when an error message appears in FF. I looked in preferences, but it doesn't seem to be an option to turn it off.

    https://www.liberiangeek.NET/2013/07/how-to-change-or-disable-the-alert-sound-in-Ubuntu/

    Parameters can change a few years under Ubuntu, but this gives an idea where to look.

    Firefox itself has no such sound notifications.

    #367259 said

    maybe try to turn off the sound error in operating system Windows/preferences
    not sure if FF has its position about the error of his

    It's Linux and not Windows, but you're on the right track.

  • When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

    Original title: race Roller Coaster Tycoon 3

    When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

    Hi Redbaron666,

    Have you checked if the game works the clean boot?

    I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

    Windows 7 Compatibility Center

    Method 1: You can run the game in compatibility mode and then check

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

    frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

    Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

    On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

    ``````~~~~`````

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

  • Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

    I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

    Boot into safe mode and see if it will remove. If this is not the case, try this tool.

    Unlocker File Remover

    Download it from FileHippo
    http://filehippo.com/download_unlocker/

    Download from CNET
    http://download.CNET.com/WOT/3000-2378_4-75011499.html

  • My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

    My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

    There is a lot of noise from speakers as well.

    Disable the hardware accelerator or install flash player 10.

  • Cannot access Windows Store. Error: App not available, either you have been disconnected from the Internet Server or access problem

    I recently bought a new vaio with touchscreen and win 8. the ' store became available? I clicked on the app and get this message: App not available, either you have been disconnected from the server or access to Internet number... something... not that is the case... .laptop is old 2 days... and I tried to put it in place... it's very frustrating... and I am hating victory 8 technology now...

    Original title: not like winning 8 all the

    Hi GESH78,

    -You are able to access the Internet outside of Windows Store?

    This issue may be caused if you are using the proxy settings, incorrect settings or store waiting for update needs to be installed on your computer. I would suggest trying the following steps and check if it helps.

    Step 1:

    Install all pending Windows updates and check if it makes a difference.

    To check updates

    one) open Windows Update in Control Panel by dragging it from the right edge of the screen, type Search (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking Search), get into Windows Update in the search box, by typing or clicking on settings and then type or by clicking install optional updates.

    (b) in the left pane, press or click find updates, and then wait while Windows searches the latest updates for your PC.

    (c) if updates are found, tap or click install updates.

    Read and accept the terms of the license and then press or click Finish if the update requires it. You may be prompted for an administrator password or to confirm your choice.

    Step 2:

    I suggest you delete the Windows Store cache and check how it works.

    (a) press Windows + R logo

    (b) type wsreset.exe in the run window, and then press ENTER.

    Step 3:

    Disable the proxy connection

    If you use a Proxy connection, then try to disable the proxy connection and check.

    Follow the steps to turn off the proxy connection.

    (a) click on the gear box in the upper right corner in internet explore.

    (b) click on the Tools button and then click on Internet Options.

    (c) click on the Connections tab, then click LAN settings.

    (d) uncheck the use a proxy server for your LAN check box.

    (e) click ok.

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Error message: (translated from Dutch) 'Cannot find corresponding style page for the query.

    Error message: (translated from Dutch) ' cannot find corresponding style page for media interview "(see picture).

    I can't find what the problem with this page: steun Yolaine

    This message does not appear on the other pages of this site...

    What I've done wrong?

    Thanks in advance!

    Martian

    dreamweaver.jpg

    There are two things that are probably the origin of this error.

    Line 22 in your HTML code looks like this:

    http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

    I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

    If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

    Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

    MalwareBytes AntiMalware

    SUPERAntiSpyware

    Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

    Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

    Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

    Uninstall all software from Dell to control panel > Add / Remove programs

    Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

    Close all running applications (anything with an icon on the taskbar).

    Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

    After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

  • Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

    Question asked by Neil Clark (me)
     
    I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
     
    Sunday, August 22, 2010 01:54
     
    Windows Live K - Ann C response.
     

    Hi Neil,

    This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:


    Important:
    before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

    Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.


    BACKUP REGISTRY KEYS:

    1. click on Start, click on run

    2. type regedit and click Ok

    3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

    4. click on file and click on export

    5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

    6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

    7. navigate to the location and find the name of the file with the .reg extension and click Open.

    Note: you will be prompted that importation has been properly registered in the register.


    TROUBLESHOOTING STEPS:

    1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

    2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

    a. click on the [] sign + next to HKEY_CURRENT_USER

    b. scroll and click on the [] sign + next to Software

    c. scroll down and click on the [+] sign next to Microsoft

    d. scroll down and click on the [+] sign next to Windows

    e. scroll down and click on the [+] sign next to CurrentVersion

    f. scroll and click on the [] sign + next to the Explorer

    3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

    4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

    5. close the Windows Registry Editor and restart your computer.

    Thank you

    K Ann C.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

     
    Thursday, August 26, 2010 09:27
     
    Response from Neil Clark
     

    Hi K - Ann,

    Thank you for the above information.

    I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

    Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    Can you tell me what I need to do to work around this problem of backup of the registry?

    I look forward to receiving your response.

    Thank you

    Neil Clark.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Monday, August 30, 2010 22:19
     
    Response of Windows Live Mechell P.

    Posted by Neil Clark
     

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    For this error, you must contact the Support Windows via Microsoft answers Forum link below:
    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Thank you
    Mechell P.

    Hi NeilRClark,

    When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

    Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

    To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

    Check out this link to do the same thing:

    How to capture a file or a folder in Windows XP

    To take ownership of a file or folder

  • I got the error message "Spooler subsystem app stopped working and was closed".

    I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

    Hello

    You should probably check with Support from Adobe and their communities and Forums in case
    There are known problems.

    Adobe - Support
    http://www.Adobe.com/support/

    Adobe - communities
    http://www.Adobe.com/communities/

    Adobe - Forums
    http://forums.Adobe.com/index.jspa

    ====================================

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    The value of all Services back to their default values.

    Start - type into the search box-> Services find top - make a right click on - RUN
    AS AN ADMINISTRATOR

    BlackViper - for Vista SP1 - Services - all return to their default values.
    http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

    BlackViper - for Vista SP2 - Services - all return to their default values.
    http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Debugger disconnected from the local process. IntegratedWebLogicServer stops

    Hello

    Get the following error message when you try to debug page. Help me about this

    < 26 August 2015 13:23:10 IST > < error > < security > < BEA-090892 > < loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely. >

    < 26 August 2015 13:23:10 IST > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

    weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)

    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

    at weblogic.security.SecurityService.start(SecurityService.java:141)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    Truncated. check the log file full stacktrace

    Caused by: oracle.security.jps.JpsRuntimeException: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:496)

    to oracle.security.jps.internal.policystore.xml.XmlPolicyStore. < init > (XmlPolicyStore.java:276)

    at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)

    at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)

    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)

    Truncated. check the log file full stacktrace

    Caused by: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)

    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)

    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)

    at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:411)

    to oracle.security.jps.internal.core.datastore.xml.XmlDataStore. < init > (XmlDataStore.java:276)

    Truncated. check the log file full stacktrace

    Caused by: javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunction(StaxPolicyStoreParser.java:2186)

    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctions(StaxPolicyStoreParser.java:2072)

    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processAppPolicy(StaxPolicyStoreParser.java:796)

    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processPolicyStore(StaxPolicyStoreParser.java:521)

    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:120)

    Truncated. check the log file full stacktrace

    >

    < 26 August 2015 13:23:10 IST > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >

    < 26 August 2015 13:23:10 IST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >

    < 26 August 2015 13:23:10 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >

    [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

    Process is complete.

    Debugger disconnected from the local process.

    [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

    Thank you

    Krishna

    Hi Cvele_new_account

    Thanks for the reply.

    I tried that, but he helped me. Finally I deleted the DefaultDomain file under the following path to get rid of the question

    C:\Users\Username\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29

    Thank you

    Krishna

Maybe you are looking for