Sound recording works successfully, but will be no recording CD or DVD - Equium A60
On an Equium A60 wehen trying to record CD/DVD
I get the following error message in the Advanced section when the Player opens to have not recorded.
Direction: ASC 03: 73 ASCQ: 03 (command 2A)
-------------------------------------------------------
PX.dll: 1.8.26.500
pxdrv.dll: 1.1.11.0
PxMas.dll: 1.8.26.500
PxWave.dll: 1.8.26.500
PXWMA.dll: 1.0.0.3
I have been successfully burning CD and DVD (same discs) for two years and suddenly he stopped. I run Checkdisk and defragmented, tried with short filenames etc under the guidance of another forum without success.
Any suggestions?
Hello
In my opinion, it is not wonder if something stops working after so long. This path is not easy to say anything because we don t know what did you do with the device (your personal configuration) or applications that you have installed. As far as I know done recording part of the recovery image and only if you install OS again everything should work again.
Otherwise definitely delete Sonic and test the drive with the other burning software.
Tags: Toshiba
Similar Questions
-
I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!
There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.
1. download the file of configuration Flash from here:
Adobe Flash - Plugin version.
Save it to your desktop.2. close Firefox using file > exit
Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
{XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}3. then run the Flash configuration from your desktop file.
4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/
- On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).
See this:
http://vistasupport.MVPs.org/run_as_administrator.htm -
My Apple TV is only to play a sound on my iPad but will not show the film?
My Apple TV is only to play a sound on my iPad but will not show the film?
Welcome to the Jennifer Apple community.
Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.
If it is supported
these steps, check to see if things work after each step if necessary, before you try the next.
- Check AirPlay is on the Apple TV (turn market if it already is)
- Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
- Restart the Apple TV (settings > general > restart).
- Restart the Apple TV by removing ALL cables for 30 seconds.
- Restart your router. (Also try to remove the power cord for at least 30 seconds)
- Restart your mobile device.
If you're still having problems, the following article can help you.
Troubleshooting connections and Wi - Fi networks
WiFi Diagnostic Software (for Mac users)
You will also find help on this page, where I have collected some of the more unusual solutions for network problems.
When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.
-
I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What would be my next step to get this race?
CS2 (or earlier version) activation server has disappeared, then read below
You MUST use the special number on the page, not your original serial number
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
-
Cannot record audio CD player (Equium A60-155)
Audio CD play disc ok, but can not save as ".wav" using sound recorder in Windows or the AV basket supplied with the system. I have configured the noise map I / O and volume sliders but still no luck - it an option is grayed out on the properties of the sound card that suggests something is not available or active with the soundcard - ideas?
Hello
It will be interesting to know what exactly is gray. AFAIK if sound card is not installed correctly the recorder does not work correctly.
I had the same problem. After update the sound card driver, it's all ok.
-
my cd/DVD-RW drive still reads CDs but will read is no longer the dvd? Help please?
I have a laptop toshiba satellite I just purchased aprox. 3 months ago. everything worked very well and the about 2 weeks ago, I went 2 play a dvd, and it will read is more them.ive since searhing forums and faq. as anyone can relate to, it's very frustrating because I have about 175 gb of stuff I burn 2 DVDs on the laptop.
Hello
Well, it is possible to distance it's the brand of double layer discs
you use (assuming that the drive can read discs double layers).
Or the drive has a hardware problem.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Essbase dataload is successful, but the data did not get loaded
Hi John,.
I load the data into essbase cube. It worked successfully, but in the execution tab, the number of insertions is 0. When I saw the agent log the following appears. Could you please let me know what it means
A JDK is required to run Web Services with OracleDI. You are currently using
a JRE.
From Oracle Data Integrator Agent...
Version: 10.1.3.5 - 11/10/2008
2009-10-22 08:15:30 AM (main): server launched
Access to the properties file error. Essbase.Properties: essbase.properties (The
system cannot find the file specified.) Using the default values.
Hyperion provider Services - version 9.3.1.1.0 Release 050
Copyright (c) 1991, 2007 Oracle and / or its subsidiaries. All rights reserved.
connection mode: INTEGRATED
Essbase.Properties: essbase.properties
Domain.DB location: domain.db
enable log console: false
enable log file: false
logRequest: false
logLevel: ERROR
DESS_ES_HOME Java System properties: null
Initialization of the essbase and connection wrapper
log4j: WARN no appenders could be found for logger (D:\Shared\Logs\WrkForce\WrkFo
RCE.log).
log4j: WARN Please initialize log4j correctly system.Hello
If it was properly executed, and there is no insertions, releases, you must first check the log to see if all records have been rejected.
Then you will need to check the SQL code generated because more than probably he not returned no documents.See you soon
John
http://John-Goodwin.blogspot.com/ -
Question? I use Photoshop for 12 years or more on a succession of computers. It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me. Photoshop turns on but gets so turned off by Windows 10. V. frustrating - what can I do?
What version of Photoshop? have you tried to do a right-click on the icon and selecting run as administrator
-
As a first step I disconnect and then reconnect the speakers and it would work again, but so far nothing.
Hello
1. don't you make changes on the computer before the show?
2. which version of the operating system are you using on the
computer?
Method 1:
Try the steps in the link and check if this may help:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsMethod 2:
If you use windows vista and windows 7, you can try the procedure described in "sounds of my speakers is crackling or distorted" link and check.
Windows 7:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
Windows Vista.
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems -
I just downloaded Skype on my computer, when I did the test call the sound is very clear, but when I made my appeal I do not what I say on the test there is a loud noise in the background
Hello
I would suggest trying the following steps and check if it helps.
Method 1:
Try to run the store and check out them below if itf can help:
http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
Method 2:
Try these steps and check:
a. Click Start, open Control Panel.
b. click sounds, click the recording tab.
c. click microphone, and then click Properties.
d. under the controller information, check if the correct sound card is selected.
e. click on the advance tab, under exclusive mode uncheck both boxes.
f. click on apply, then ok.
Check if it helps.
Method 3:
Try to update the latest drivers for the sound card and then check that if it helps, here is the link:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
It will be useful.
-
I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?
Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?
-
No sound on HDMI, image works fine but in the sound Manager tells me not connected HDMI
Hello
I have a 1050ez tm2 and having problems with my HDMI port.
When I connect the screen gets automatically duplicated and everything works fine, but when I try to play a movie with vlc for example I get not all sound through the TV, only on the tablet.
Of course, I went into the sound Manager, because I suspected that you specify the tm2 where to play the sound, but to my surpise, he said that the HDMI cable is not connected?
I was able to make any changes to the default output device...
Even in the IDT application wants to tell me that the HDMI cable is not connected. I have plugged in and out several times without success.
I hope someone can help me on what precedes, I already searched the net for several hours but havn't seen a similar problem, the more problems it shows as connected cable...
Thanks in advance!
Geen
I wanted to just let know you it worked!
I reinstalled the drivers, has not worked since the beginning, when I plugged the cable while the laptop was running, but after a reboot, everything worked fine. The hdmi port was automatocally standard value and disconnect after all is back to normal.
Rgds,
Geen -
I am running Windows 7 and I have a batch file to copy files from 1 computer to another. It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening. None of the files are copied, and the control box does not appear. Any ideas?
Run a batch file in Task Scheduler
Hello ITGIRL17,
Thanks for posting on the Microsoft answers Forum.
Configure your task under your administrator account.
Then go to the folder with the batch file and ADD on control for the folder administrator permissions and each of the files in batches.
If the batch files write data, then the target for the task should ALSO have all explicit permissions.
Now try to run the Task Scheduler task.Also check the information from the following link and look specifically at Brian Vandemark Sommaire steps on 2 September.
http://social.technet.Microsoft.com/forums/en/winservermanager/thread/d47d116e-10b9-44f0-9a30-7406c86c2fbeI hope that this information will help resolve your batch file does not problem.
Sincerely, Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)
I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.
Please would you give me help? I really appreciate!
Thank you very much.
Eleanor
A prompt by right clicking and select "Run as Administrator"
and then at the command prompt, type: chkdsk /f r, then press the Enter key.If you are asked to plan the volumn to check the next time that the system restarts,
Enter: yIf you know the manufacturing of your hard drive you can also download their diagnostic software.
Another use: SpeedFan has an online health analysis function
(SMART tab) for hard drives. It will show how your disks
compared with other discs of the same brand and model.
http://www.almico.com/SpeedFan.php========================================================================
Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.
Click on start / all programs/accessories then
Right-click on the command prompt option and select "Run as Administrator".
(or "Safe Mode" open a command prompt)
At the command prompt, enter: SFC/scannowWindows 7 - order SCANNOW SFC - System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
http://support.Microsoft.com/kb/928228J W Stuart: http://www.pagestart.com
-
own original iPod, USB-Firewire used cable, works but will not go up in iTunes.
I own the original iPod. used USB to firewire cable. A big mistake. now, it works but will not mount on iTunes. tried reset-no good version 1.5 OS
I don't think there is such a thing as a USB-to-FireWire, not a single cable that actually works. USB and FireWire are very different, including the power voltage which is used to load.
So you're saying that he is no longer connects to iTunes, even when you use a FireWire cable and connect to a FireWire port? Still, he does pay when you connect it to your FireWire adapter?
Maybe you are looking for
-
Satellite A300D - 21(d) - burning software does not recognize my optical drive
Greetings,I've updated preinstalled Vista Home with Vista Bussiness x 64, and since then, I have problems with my optical drive. Notepad is a month old. It reads CDs and DVDs without problem, but when I start the burning software (Toshiba Disc Creato
-
WiFi can not turn on in Z470 (8 32-bit Windows)
I upgraded my laptop Z470 Windows 8 Enterpraise (32 bit). I downloaded all the drivers from the center of Support Lenovo Web site then I installed these drivers. I installed the new driver for Atheros AR9285, in Device Manager, I see that the adapter
-
Parameter passing between TestStand and Labview
Hello world I'm trying to pass a value of LabVIEW 8.5 to 4.0 TestStand. After reading some of the posts, it seems that I must have terminals coming from the icon and that these can be edited in the "connection" pane I spent a long period of time to
-
Cursor Vista runs without clicking, I want that he stop doing that.
If the cursor is positioned on a program button for a few seconds he seems to think you want to click on this button and it will run. I want to disable that stupid thing, it of boring and could potentially cause me serious financial problems while pl
-
When will we see more diversity and less sexist images available through Stock?