Sound: when done game over?

Similar Questions

• No sound when don't receive the text for a single contact.

  My iPhone6 does not play a sound for one of my contacts when a text is received.  Others make it sound when the text is received.  Any ideas why this happens?

  HI there, milford dennisfromnew!

  Thank you for using communities Support from Apple. After reviewing your post, I see that when you receive an SMS from a particular person, you don't get notification sounds. I use Messages every day to keep in touch with friends and family, so I know how important it is to make sure you get all your notifications and would be happy to help you!

  It is possible that you cut your conversation with this person. The section "Mute conversations" in the following article will give you more details on where to control and how to enable and disable.

  Use Messages with your iPhone, iPad or iPod touch

  The information is:

  Silent conversations

  To no longer receive message notifications, you can cut off conversations. In the Messages, go to the conversation you want to turn off notifications for. Then click details and turn on do not disturb. When do not disturb is activated,will appear next to the conversation. This interruption of the notifications only for this conversation to message, not your device. Always you receive all messages and see notifications for them on your lock screen.

  You can also cut all your conversations by turning on do not disturb in settings. Go to settings > do not disturb and tap manual or programmed. This will stop all notifications on your device.

  Happy texting!

• No sound when don't connect speakers

  original title: record play sound I turn on my computer for the Dell Latitude 4310 and when I plug my speaker cable in I can't hear anything at all and need help

  need help on what to do about why I don't hear any music when I connect my speakers to my new laptop Dell Latitude 4310?

  Hello

  1. What is the operating system installed on the computer?
  2. are you able to hear the music from the internal speakers?
  3 do you mean to say that when you connect the speakers, you are unable to listen to the music, is that correct?
  4. don't you plug the speaker to another computer and check?

  I suggest you to follow the steps from the link and check.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Refer for more information
  No sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  If necessary you can download the audio drivers from Dell here website: http://www.dell.com/support/drivers/us/en/04

  I hope this helps.

• How can I configure preview only play sounds when it's over?

  I want to set up as the old RAM Preview. I see no button sound"but that completely stops the sound all the while. I want it to be silent until he finished all the frames loading in the cache then audio playback is possible. I have change the settings drawer, check that each bock checked all icons that makes sense to me. I just set it is like the old RAM Preview. NO noise until it is all caching and then executives play sounds subsequently.

  Check the 'Cache before reading.

• I don't see the overview of URL that you get when you hover over a link. Why?

  Until today, when I flew over my cursor a link, a preview of the URL of the link appears at the bottom left of my screen, above the Start button (I use Windows Vista). Currently when I hover over a link, no preview appears, so I do not know the web address where I'm going when I click on the link. I thought that maybe this was due to the update to Firefox 19.0, but my friends who have also updated say they can still see the URL preview. Did somehow turn off the preview of the URL by chance? If so, how can I turn it back on? If this is not the case, why is it gone?

  I still see the URL previews! I don't know exactly why; He could have just a weird blip on my end. Thanks for your help!

• When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  Hi royster677,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your iPhone. If you are having problems with the tone of the text for a specific user, you can check the parameters of Contact of the user (under the Edit button) as shown in the following page of the User Guide:

  Contacts at a glance - iPhone

  If everything looks correct, and you still have questions, you can also check your settings stuck and do not disturb:

  Block calls and messages to block or filter on your iPhone, iPad or iPod touch - Apple Support

  Use of do not disturb on your iPhone, iPad or iPod touch - Apple Support

  Concerning

• When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Original title: race Roller Coaster Tycoon 3

  When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Hi Redbaron666,

  Have you checked if the game works the clean boot?

  I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

  Windows 7 Compatibility Center

  Method 1: You can run the game in compatibility mode and then check

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I hear vidios or sounds when I play a game of bridge

  I used to hear the sound on videos but it would break upward and I could hear playing on itself. I tried to fix it in Add and remove programs. Now he says I have media player 11 program but I have no sound. When I play bridge, I got sound when I clicked on a card and I don't have this noise. I put in my original disk to see if it would download again, but it is not worked. When I go to different places, he says I have no device to use for audio.  Help please

  Hi CarolTurnerME,
   
  -Are you unable to hear sound only with this application? Can you hear the audio during playback of the song or a movie with Media Player?
  -What, exactly, is a transcript of the error message that you receive?
   

  Follow the three steps solution given in the link below and see if this helps you.

  No sound in Windows

• No sound during the game NFS Rivals

  I have a HP Envy 15 J049TX.
  While playing NFS Rivals I don't get everything in the sounds of the game. The strange thing is that I hear for other applications I have on my system. I tried unistalling the game and install it again, updated my directx and even uninstalled and reinstalled my IDT HD Audio drivers, but the problem remains unsolved. Even the sound of windows volumes are full
  
  Kindly help

  Guys I have formatted my system because of a problem and when I installed NFS Rivals on the new system, it worked like a charm. Now, I'm getting sound!

• BlackBerry Bold 9000 smartphone, OS 5: No. clock alarm SOUND when your handheld up from disabled mode

  Hello I have recently updated my device software 9000 "BOLD" from v4.6 to v5. All excellent work EXCEPT the sound alarm clock! When my pocket computer is turned on, it works according to my related settings. The problem is when I put an alarm clock hour and turned off my pocket computer. In time, your handheld to wake-up (as it should normally), displays the dialog box form about the NAP or termination of the alarm, but there is NO SOUND AT ALL!. I searched the community with regard to problems and I tried to apply to my handheld all possible as suggestions: 1) the use of a simple build-in sound) 2. an audio file stored on the memory on my handheld and not on an external 3 card). good application battery 4 Physics) and of course, pool baterry many outings (for hard reset)! Unfortunately, that nothing has worked! Because I use my pocket computer as my main (only) wake up in the morning, I tried to do the follwing test: 1) selected the profile 'No Sound' (I don't want an accidentical call to wake me up after midnight...) 2). Applied a 3 alarm time). He woke up my computer to Pocket-up off my computer pocket at right time, and there was SOUND! After many attempts to choose different sound profiles, I discoverded WHAT under the profile "No Sound" alarm on my handheld working correctly! I even tried to apply all the settings of the profile working group 'No Sound' of other existing profiles or even new, but without success. Is a has a idea how to 'reset' other sound profiles? Please note that many sound profiles (as usual) does not give you the option to remove them. Thanks in advance for your kind answer consider GAM

  Hello

  Finally, I made up my mind and proceeded to the wipe of my pocket computer software!

  This procedure indeed resolved!

  If someone would like to know more about wipping procedure that I follow, I'd be happy to share with him (her) my "experience"...

  I would like to thank all those who have placed a response to my initial post position in order to help out me.

• Stop the sound when another sound bed

  Hey guys,.

  Using Flash Pro CC 2014, Actionscript 3

  I work on a soundboard and use buttons which sounds and I would like to indicate that when a new sound plays, it automatically stops the current sound of the game, which sounds way 2 does not play at the same time.

  But I also have a button which stops all sounds, I use the code 'Click to stop all sounds' Audio and video in Code snippets.

  So I'm basically wanting to make sure that I can do both, hold the judgment of all the key sounds, but also have when you press any button sound, it stops all sounds and starts playing the button / current. Any suggestions?

  BTW I'll implement the symbols such as buttons, not the clips video incase you need to know for coding, but I can switch to the clips if it's easier. I was just used to buttons on old versions of Flash for simple stuff like that.

  Thank you.

  the code that you have demonstrated stops all sounds (if there is) currently playing, and nothing else.

  I don't know why looks like it would be "..." immediately start playing the audio file that is located on this button".

  If you want sound to stop all the sounds and play NewSound, use:

  sound.addEventListener (MouseEvent.CLICK, fl_ClickToStopAllSounds);

  var sc:SoundChannel;

  function fl_ClickToStopAllSounds(event:MouseEvent):void

  {

  SoundMixer.stopAll ();

  var newSound:NewSound=NewSound();

  SC = newSound.Play ();

  }

• How can I see the full target URL when I hover over a link? Not a short URL.

  How can I see the full target URL when I hover over a link? I don't want to see short URL. Is there a way to customize this?

  Full target URL allowing me to easily see how visitors reached my site via Google, Bing, Yahoo Research, etc. With the short URL I don't see what they entered into the search field.

  You can use this extension to restore the characteristics of loss of status bar and customize settings such as displaying the URL of a link to the overview.

  • Evar-4-status: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

• NB250 makes scream sound when the lid is closed

  Hi all

  I am facing this problem with my laptop NB250.

  Steps to reproduce the problem
  i. internal microphone and speakers are enabled
  II. play some audio.
  III. close the lid while the audio is playing.
  IV. when the lid is closed (or even when she is brought very close to the keyboard) there is a loud noise.

  I went to the shop where I bought the laptop. The technician he said that this sound is done because the microphone is taken directly above the enclosure when the lid is closed.
  But I do not think that the sound must be made when the lid is closed.

  I should be grateful if the following queries are processed:
  i. This is a problem with only with NB250?
  II. is it a common problem with all laptops that have the speakers placed next to the touchpad, which brings the microphone from the speakers when the lid is closed?
  III. If there is a problem with my laptop, what should I do to repair/replace?

  Thank you
  Yogesh

  Hi mate

  I think you're talking about the sound looping between speaker <->microphone.
  I n t have this model laptop but I found an interesting How TO from Toshiba on similar topic. It addresses s L500 series.

  Check this box:
  + Hissing sound +.
  http://APS2.toshiba-tro.de/KB0/TSB0402UB0001R01.htm

  Disable the microphone volume in the speakers properties and this will help you get rid of these sounds.

• Some iPhoto albums appear empty with no sticker and say '0' when I fly over the album, but the photos are there when I double click.

  To start, I read in countless discussions here on iPhoto glitches and patches, so I hope I'm not repeating this question, but I couldn't find the answer anywhere I had a question after question with iPhoto (mainly around several accidents after organizing photos into albums that made the album organization and this issue I describe below) and is considering moving to Adobe Bridge just to have a reliable place to store my photos without worrying about the constant pain. I realize that no program is immune to glitches, but the volume and the frequency that I've had with iPhoto is unmatched (which led me to wonder if it is just a user error, but I honestly can't understand for the life of me). So I describe my current number below, in the hope of resolving the issue so that either A. I can fix and give iPhoto a chance more or B can I ensure that my photos are safe and intact before transfer to another program.

  Some of my iPhoto albums appear empty with no sticker and say '0' when I fly over the album, but the photos are there when I open the album. I have rebuilt the thumbnails, and it has not solved the problem. After the other issues that I had with iPhoto crashes, I made sure that all updates have been installed. Unfortunately, I don't remember if I've rebuilt or repaired the database, but it seems that all my photos are present, all mixed together and some showing in the albums 'empty '. Here's my question: is one problem, other than being boring? And should I switch to another program, or have I missed something?

  A few details:

  • I have rebuilt thumbnails today and it took 5.5 hours. It seems completing without problem, but has not solved the problem.

  • I have my computer fully backed up on an external drive to Seagate drive as Mac OS extended (journaled) as well as iPhoto backed up separately on the drive as well.

  • Looks like I have a "library" and "alias."

  • I use iPhoto to organize my photos. I use Photoshop to edit. I love the feel of iPhoto, but I lost hours and hours trying to organize and solve problems.

  • I use iPhoto 11 version 9.4.3 OSX 10.8.5 / / MacBook Pro processor 2.9 GHz Intel Core i7 Memory 8 GB 1600 MHz DDR3

  More worrying is the issue of the repeated questions. How you use iPhoto and Photoshop together?

  Tabula Rasa:

  Download iPhoto Library Manager and use its function of reconstruction. (In early versions of the Library Manager, this is the file-> control Rebuild. In versions later it is under the menu library.)

  This will create a completely new library. It will then copy (or try) your photos and all associated metadata and versions to this library and as close as possible to what you had in the damaged library fix it. It does this based on the information it finds in the iPhoto sharing mechanism - but it means that things not shared won't be there, so no slide shows, books or calendars, for example - but it should recover all your events, albums and keywords, faces and places.

  Because this process creates a completely new library and does not change your old, it is non-destructive, and if you are not satisfied with the result, you can simply go back to your old.

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.